Some Miscellaneous Civil Works To Hospital And Academic Buildings Within The Burdwan Dental College Campus., purba-West Bengal

Some Miscellaneous Civil Works To Hospital And Academic Buildings Within The Burdwan Dental College Campus.- 1 Dismantling All Types Of Masonry Excepting Cement Concrete Plain Or Reinforced, Stacking Serviceable Materials At Site And Removing Rubbish As Directed Within A Lead Of 75 M. 2 125 Mm. Thick Brick Work With 1St Class Bricks In Cement Mortar ( 1:4 ) In Ground Floor. 3 Ordinary Cement Concrete ( Mix 3:1:5:1 ) With Graded Stone Chips ( 20Mm.Down Nomnal Size ) Excluding Shuttering And Reinforcement, If Any, In Ground Floor As Per Relevant Is Codes. 4 Plaster ( To Wall, Floor, Ceiling Etc. ) With Sand And Cement Mortar Including Rounding Off Or Chamfering Corners As Directed And Raking Out Joints Including Throating, Nosing And Drip Course, Scaffolding / Staging Where Necessary ( Ground Floor ) . [ Excluding Cost Of Chipping Over Concrete Surface ] With 1:6 Cement Mortar 15 Mm Thick Plaster 5 Rendering The Surface Of Walls And Ceiling With White Cement Base Water Proof Wall Putty Of Approved Make & Brand. ( 1.5 Mm Thick ) Same As Plaster 6 Applying Interior Grade Acrylic Primer Of Approved Quality And Brand On Plastered Or Cencrete Surface Old Or New Surface To Receive Distemper / Acrylic Emulsion Paint Including Scraping And Preparing The Surface Throughly, Complete As Per ManufacturerS Specification And As Per Direction Of The Eic. ( In Ground Floor ) ( A ) One Coat I ) Water Based Interior Grade Acrylic Primer Area Same As Putty 7 Applying Acrylic Emulsion Paint Of Approved Make And Brand On Walls And Ceiling Including Sand Papering In Intermediate Coats Including Putty ( To Be Done Under Specific Instruction Of Superintending Engineer ) : ( Two Coats ) Luxury Quality 8 Supplying And Laying True To Line And Level Double Charge Vitrified Tiles Of Approved Brandconforming To Is 15622: 2006 ( Group B I A ) And Tested As Per Is 13630:2006 ( Relevant Parts ) [ Non-Modular Sizes For Tiles With Water Absorption ( Av. ) = 0.08 % ] In Floor, Skirting Etc. Set In 20 Mm Thick Sand Cement Mortar ( 1:4 ) Bed Prepared After Application Of Slurry Using 1.75Kg Of Cement Per Sqm Over The Base And 2Mm Thick Cement Slurry Using Cement @2.91Kg. / Sqm At The Back Side Of The Tiles And Laid Over The Mortar Bed Using 0.2 Kg / Sqm Of White Cement Used For Joint Filling With Approved Pigment As Directed And Removal Of Wax Coating Of Top Surface Of Tiles With Warm Water And Polishing The Tiles Using Soft And Dry Cloth Upto Mirror Finish Complete Including The Cost Of Materials, Iabour And All Other Incidental Charges Complete True To The ManufacturerS Specification And Direction Of Engineer-In-Charge. ( A ) Ln Ground Fioor: ( Size Not Iess Than 600Mmx 600 Mm X 9.5 Mm Thick ) 9 Supplying, Fitting And Fixing Black Stone Slab Used In Kitchen Slab, Alcove, Wardrobe Etc. Laid And Jointed With Necessary Adhesive Cement Mortar ( 1:2 ) Including Grinding Or Polishing As Per Direction Of Engineer-In -Charge In Ground Floor. 10 Supplying, Fitting & Fixing Of Partly Glazed Partly Panelled Or Fully Glazed Single Leaf Aluminium Swing Door Of All Aluminium Sections Viz Door Frame ( Top And Side Frame ) , Shutter ( Top Rail, Bottom Rail, Lock Rail, Door Vertical ) , Glazing Clip Made Of Aluminium Alloy Extrusions Conforming To Is: 733-1983 And Is: 1285-1975, Annodized Conforming To Is:1868- 1983, Fitted With All Other Accessories Viz. Epdm Gusket, Cleat, Angle Screws Etc. Including Labour Charges For Fitting And Fixing Of Aluminium Door With Door Spring, / Aluminium Hinges, Glass / Panel Board All Complete As Per Architectural Drawings And Direction Of Engineer-Incharge. ( Excluding Cost Of Glass / Panel Board, Door Spring / Al Hinges, Door Closer, Door Stoper, Handle, Tower Bolt And Locking Arrangment Etc ) 10-12 Micron Thickness Annodizing Film Natural White 11 Priming One Coat On Steel Or Other Metal Surface With Synthetic Oil Bound Primer Of Approved Quality Including Smoothening Surfaces By Sand Papering Etc. 12 Painting With Best Quality Synthetic Enamel Paint Of Approved Make And Brand Including Smoothening Surface By Sand Papering Etc. Including Using Of Approved Putty Etc. On The Surface, If Necessary: ( B ) On Steel Or Other Metal Surface : With Super Gloss ( Hi-Gloss ) ( Iv ) Two Coats ( With Any Shade Except White ) 13 Supplying, Fitting & Fixing Of Aluminium Fixed Partion Wall Of All Aluminium Sections Viz Top, Bottom And Side Member, Intermediate Member, Glazing Clip Made Of Aluminium Alloy Extrusions Conforming To Is: 733-1983 And Is: 1285-1975, Annodized Conforming To Is:18681983, Fitted With All Other Accessories Viz. Epdm Gusket, Cleat, Angle Screws Etc. Including Labour Charges For Fitting And Fixing Of Aluminium Fixed Partition Wall With Glass / Panel Board All Complete As Per Architectural Drawings And Direction Of Engineer-In-Charge. ( Excluding Cost Of Glass / Panel Board, 10-12 Micron Thickness Annodizing Film. Natural White. A ) For Unsupported Length Of Vertical Member Upto 1.50M. Height Of Both Ends Of Vertical Member Restrained But Panel With In 0.90 Sqm 14 Providing And Fixing Exterior Quality Aluminium Composite Panel ( Acp ) Wall Cladding On Existing Al. / Ms Frame Work With Gi Brackets, Acp Fixed On The Existing Frame Work By Folding The Edges Of Acp Panel ( Engraving The Rear Surface Of Acp Sheet ) With Cp Angles, Cleats And Strainless Steel Screws Forming Groves At The Periphery Of Acp Panel. Such Grooves Filled With Foam And Silicon Sealant Etc. Complete With All Materials ( But Including The Cost Of Silicon Sealant ) , Labour, Scaffolding And All Other Incidental Charges Complete In All Respect As Per Specification And Direction Of Engineer-In-Charge. ( Mode Of Payment Is On Finished Surface Area Of Acp ) ( A ) 3Mm Thick ( 0.25Mm Al.+2.5Mm Ldpe +0.25Mm Al. Pvdf Coating ) 15 Supplying, Fitting And Fixing Cpvc ( Chlorinated Polyvinyl Chloride ) Pipes Of Approved Make Conforming To Is-15778: 2007 . With All Necessary Accessories, Specials Viz. Socket, Bend, Tee, Union, Cross, Elbo, Nipple, Longscrew, Reducing Socket, Reducing Tee, Short Piece Etc. Fitted With Holder Bats Clamps, Including Cutting Pipes, Fitting, Fixing Etc. Complete In All Respect Including Cost Of All Necessary Fittings As Required, Jointing Materials In Any Position Above Ground. ( Payment Will Be Made On The Centre Line Measurements Of Total Pipe Line Including All Specials. No Separate Payment Will Be Made For Accesories, Specials. ( A ) For Exposed Work ( Ii ) Cpvc Pipes Class-2, Sdr-13.5 Dia - 20 Mm 16 Dia - 25 Mm 17 Dia - 32 Mm 18 Supply Of Upvc Pipes ( B Type ) & Fittings Conforming To Is-13592-1992 ( A ) ( I ) Single Socketed 3 Meter Length75 Mm 19 Fittings ( Ii ) Plain Tee 75 Mm 20 Fittings X ) Bend 87.5º 75 Mm 21 Fittings Xvi ) Pipe Clip75 Mm 22 Rubber Lubricant 500 Ml 23 Solvent Cement 250 Ml 24 Labour For Fitting And Fixing U.P.V.C. Pipes For Above Ground Work Including Cost Of Jointing Materials Etc. Fitting And Fixing All Necessary Specials, Cutting Pipes, Cutting Holes In Walls Or R.C. Floor Where Necessary And Mending Good All Damages Excluding The Cost Of Masonry Or Concrete Work, If Necessary, But Including The Cost And Fitting And Fixing Holder Bat Clamps ( Any Floor ) Or For Underground Work Including Cutting Trenches Upto 1.5 Metre And Refilling The Same Complete As Per Direction Of The Engineerin-Charge. ( Payment Will Be Made On Centre Line Measurement Of The Total Pipeline Including Specials. ( A ) Above Ground 25 Wash Basin Vitreous China Of Approved Make ( Without Fittings ) Supplied, Fitted And Fixed In Position On 75Mm X 75 Mm X 75 Mm Wood Blocks And C.I. Brackets Including Two Coats Of Painting Of C.I. Brackets. ( Iii ) 630 Mm X 450 Mm Size 26 Supplying, Fitting And Fixing Pedestal Of Approved Make For Wash Basin ( White ) 27 Supplying, Fitting And Fixing Flat Back Urinal ( Half Stall Urinal ) In White Vitreous Chinaware Of Approved Make In Position With Brass Screws On 75 Mm X 75 Mm X 75 Mm Wooden Blocks Complete. ( I ) 635 Mm X 395 Mm X 420 Mm 28 Supplying, Fitting And Fixing Squating Plate With Integral Flushing In White Vitreous Chinaware Of Approved Make In Cement Concrete ( 6:3:1 ) With Jhama Chips Complete. ( Payment Of Concrete Will Be Paid Seperately ) . ( I ) 450 Mm X 350 Mm 29 Supplying, Fitting And Fixing 32 Mm Dia. Flush Pipe Of Approved Make With Necessary Fixing Materials And Clamps Complete. I ) Polythene Flush Pip 30 Supplying, Fitting And Fixing 10 Litre P.V.C. Low-Down Cistern Conforming To I.S. Specification With P.V.C. Fittings Complete, C.I. Brackets Including Two Coats Of Painting To Bracket Etc. 31 Supplying, Fitting And Fixing Approved Brand P.V.C. Connector White Flexible, With Both Ends Coupling With Heavy Brass C.P. Nut, 15 Mm Dia. ( Iii ) 600 Mm Long 32 Supplying, Fitting And Fixing Approved Brand 32 Mm Dia.P.V.C. Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps. ( Ii ) 750 Mm Long 33 Supplying, Fitting And Fixing Waste Fittings Complete. ( A ) C.P. Over Brass ( Iii ) 40 Mm 34 Supplying, Fitting And Fixing Pillar Cock Of Approved Make. B ) Ptmt Pillar Cock - 15 Mm. ( Prayag Or Equivalent ) . 35 Supplying, Fitting And Fixing PeetS Valve Fullway Gunmetal Standard Pattern Best Quality Of Approved Brand Bearing I.S.I. Marking With Fittings ( Tested To 21 Kg Per Sq. Cm. ) . ( Vi ) 32 Mm Dia 36 Ptmt ( Polytetra Bib Cock / Stop Cock ( Prayag Or Equivalent ) 15 Mm

Refer document

INR 9657.0 /-

INR 4.82 Lakhs /-

Name of Work: -Some miscellaneous civil works to hospital and academic buildings within the Burdwan Dental College Campus.

Sl. No.	Item Description
1	Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.
2	125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.
3	Ordinary cement concrete (mix 3:1:5:1) with graded stone chips (20mm.down nomnal size) excluding shuttering and reinforcement, if any,in ground floor as per relevant IS codes.
4	Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]With 1:6 cement mortar 15 mm thick plaster
5	Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) same as plaster
6	Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer"s specification and as per direction of the EIC. (In Ground Floor) (a) One Coat i) Water based interior grade Acrylic Primer Area same as putty
7	Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty(to be done under specific instruction of Superintending Engineer) : (Two coats) Luxury Quality
8	Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brandconforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) = 0.08 %] in floor, skirting etc. set in 20 mm thick sand cement mortar (1:4) bed prepared after application of slurry using 1.75Kg of cement per Sqm over the base and 2mm thick cement slurry using cement @2.91Kg./sqm at the back side of the tiles and laid over the mortar bed using 0.2 kg/sqm of White cement used for joint filling with approved pigment as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete true to the manufacturer"s specification and direction of Engineer-in-Charge. (a) ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5 mm thick)
9	Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge in Ground Floor.
10	Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter( top rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium door with door spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-incharge. ( Excluding cost of glass/ panel board, door spring/ Al hinges, door closer, door stoper, handle, tower bolt and locking arrangment etc) 10-12 Micron thickness Annodizing film Natural white
11	Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
12	Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary: (b) On steel or other metal surface : With super gloss (hi-gloss) (iv) Two coats (with any shade except white)
13	Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top, bottom and side member, intermediate member, glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:18681983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium fixed partition wall with glass / panel board all complete as per architectural drawings and direction of Engineer-in-charge. (Excluding cost of glass/ panel board, 10-12 Micron thickness Annodizing film. Natural white. a) for unsupported length of vertical member upto 1.50m. height of both ends of vertical member restrained but panel with in 0.90 sqm
14	Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) (a) 3mm thick (0.25mm Al.+2.5mm LDPE +0.25mm Al. PVDF coating)
15	Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work(ii) CPVC Pipes Class-2,SDR-13.5 Dia - 20 mm
16	Dia - 25 mm
17	Dia - 32 mm
18	Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i)Single Socketed 3 Meter Length75 mm
19	Fittings (ii) Plain Tee 75 mm
20	Fittings x)Bend 87.5º 75 mm
21	Fittings xvi)Pipe Clip75 mm
22	Rubber Lubricant 500 ML
23	Solvent Cement 250 ML
24	Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin-charge. (Payment will be made on centre line measurement of the total pipeline including specials. (A) Above ground
25	Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets. (iii) 630 mm X 450 mm size
26	Supplying, fitting and fixing pedestal of approved make for wash basin (white)
27	Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (i) 635 mm X 395 mm X 420 mm
28	Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (i)450 mm X 350 mm
29	Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. i) Polythene Flush Pip
30	Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
31	Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (iii) 600 mm long
32	Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (ii)750 mm long
33	Supplying, fitting and fixing Waste fittings complete. (a) C.P. over brass (iii) 40 mm
34	Supplying, fitting and fixing pillar cock of approved make. b) PTMT Pillar Cock - 15 mm. (Prayag or equivalent).
35	Supplying, fitting and fixing Peet"s valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (vi) 32 mm dia
36	PTMT (Polytetra Bib Cock / Stop Cock( Prayag or equivalent) 15 mm
37	Sub Total
38	GST 18%
39	CESS 1%