Bids Are Invited For Tlmw62729330 Ps Solid Carbide Tapered Ball Nose Cutter, Half Taper Angle= 4 Deg. , Futuratialn Coated (Q3) , Tlmw62729543 Ps Solid Carbide End Mill, Z= 4 Futuratialn Coated, Shank Dia= 10Mm Size: Dia 10X22x90 M (Q3) , Tlmw62733354 Parallel Shank Solid Carbide End Mill, Diameter: 20Mm, Corner Radius R2, Shank Dia: 20M, Z (Q3) , Tlmw62738003 Ps Solid Carbide Taper Ball Nose End Mill, Ball Dia= 6Mm, Z= 4, Futuratialn Coated, Half T (Q3) , Tlmw62738011 Ps Solid Carbide End Mill Torus Cutter, Futuratialn Coated, Three No Of Internal Coolan (Q3) , Tlmw62738372 Coromill Plura Solid Carbide End Mill Cutter Dia 12, R2.5 Grade 1620 Of Ms Sandvik Ord (Q3) Tlmw62738399 Parallel Shank Solid Carbide End Mill, Futura Coated, Dia 20Mm, R3.0 Of Ms Starrag Ord (Q3) , Tlmw62745034 Solid Carbide End Mill Cutter Dia: 10, R1, Length= 72, Shank Dia: 10 (Coating Of Tialn) , M (Q3) , Tlmw62745115 Ps Solid Carbide End Mill, Centre Cutting, Z= 4, Helix Angle= 45 Deg. , Rh Cutting, Tialn Co (Q3) , Tlmw62750739 Ps Solid Carbide End Mill Shank Dia: 10Mm, Futura Coated Z= 4, Radius R2.5 Size: 10 X 25 X (Q3) , Tlmw62750747 Ps Solid Carbide End Mill Shank Dia: 10Mm, Futura Coated Z= 4, Radius R3.0 Size: 10X 25 X (Q3) , Tlmw62750801 Ps Solid Carbide Taper Ball Nose End End Mill, Shank Dia: 16 K-8, Z= 2, Half Taper Angle= 6 (Q3) , Tlmw62750844 Ps Solid Carbide End Mill, Z= 4 Futura Coated, Radius R2.0 Size: Dia: 16 X 35 X 110Mm, R2.0 (Q3) , Tlmw62755013 Solid Carbide Parallel Shank End Mill Dia: 12Mm, Right Hand Cutting With Right Hand Helix (Q3) Total Quantity : 1465
