Public Works Department-PWD has published Tender For Upgradation And Maintenance Of Hlimen To Samtlang To Lungleng. Submission Date for this Tender is 08-03-2024. Road Work Tenders in aizawl Mizoram. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Clearing and grubbing of road land including uprooting wild vegetation, grass, brushes, shrubs, saplings and trees of girth upto 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material as per technical specification clause 201. (I) By Manual means. (B) In area of thorny Jungle. |
| 2 | Cutting of trees including cutting oftrunks,branches and removal of stumps and root, refilling, compaction of backfilling and stacking of serviceable materials by manual means with all lifts as per technical specification clause 201 (A) Lead upto 100m. (i) Girth above 300mm to 600mm. |
| 3 | (ii) Girth above 600mm to 900mm. |
| 4 | (iii) Girth above 900mm to 1800mm. |
| 5 | Setting Out (1) Construction of reference pillar as per Fig 1600.1 (b) as per drawing and technical specification clause 1602.1 |
| 6 | (2) Construction of back pillar as per Fig 1600.1 (c) as per drawing and technical specification clause 1602.3 |
| 7 | (3) Construction of Job pillar as per Fig 1600.1 (d) as per drawing and technical specification clause 1602.4 |
| 8 | (ii) Excavation in Hilly Areas in Soil by mechanical means. (A) Excavation in soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per drawing and Technical Specification Clause 1603.1 |
| 9 | (iv) Excavation in Hilly Areas in Ordinary Rock by mechanical means not requiring blasting. Excavation in Hilly Areas in Ordinary Rock not requiring blasting by mechanical means including cutting and trimming of side slopes and disposal of cut materials with a lift upto 1.5 m and a lead upto 20 m as per Clause 1603.2 |
| 10 | (v) Excavation in Hilly Areas in Hard Rock requiring blasting by mechanical means. (A) Excavation in Hilly Areas in Hard Rock requiring blasting by mechanical means, lift upto 1.5 m and disposal of excavated rock upto a lead of 20 m as per Clause 1603.2 |
| 11 | Construction of unlined side drain Total length = 14114.00 m Earthwork in excavation for structures as per drawing and technical Specification Clause 305.1.including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and back filling in trenches with excavated suitable material. I. Ordinary soil (i) Upto 3m depth |
| 12 | II. Ordinary rock (not requiring blasting) (i) Upto 3m depth |
| 13 | III. Hard rock (requiring blasting) |
| 14 | Stone masonry work in Cement mortar 1:4 II.coursed Rubble masonry for Lined Side Drain. |
| 15 | Providing and laying C.C 1:3:6 for Foundation as per Clause 802,803,1202,1203. (M10) Hand mixing |
| 16 | Stone masonry workincementmortar 1:5 forsubstructure complete as per drawing and Technical Specifications clause 702,704, 1202 and 1204. B. Coursed rubble masonry (2nd sort) |
| 17 | Providing and laying filter media with Granular crushed Aggregates as per drawing and Technical Specifications clause 12043.8 |
| 18 | Stone masonry in cement mortar 1:3 for Parapet complete as per drawing and Technical Specifications clause 700 and 1208.4 I. Random Rubble masonry. |
| 19 | Plastering with Cement mortar 1:4 15mm thick on stone works as per drawing and technical Specifications clause 613.4 and1204. |
| 20 | Providing PCC M20 Architechtural coping on the top of R/Wall as per drawing and Technical Specifications clause615,710,1204.3.11 |
| 21 | Scarifying Existing Bituminous Surface to a Depth of 150 mm by Mechanical Means Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4. |
| 22 | Water Bound Macadam withScreenings(2) WBM Grading 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, Grading 2 as per Technical Specification Clause 405. (A) By manual means. |
| 23 | (3) WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller, Grading 3 as per Technical Specification Clause 405. (A) Manual means |
| 24 | Prime Coat(i) Low porosity Providing and applying primer coat with Bitumen emulsion (SS-1)on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per Technical Specification Clause 502. |
| 25 | Tack Coat (iii) Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface treated with primeras per Technical Specification Clause 503. |
| 26 | Mix Seal Surfacing Providing, laying and rolling of close-graded premix surfacing material (Cold Mix) of 25 mm thickness composed of 11.2 mm to 0.9 mm (Type A) or 13.2 mm to 0.9 mm(Type-B) aggregates using penetration grade bitumen ,as per Technical Specification Clause 509. B. By Mechanical Means Type A (I) Emulsion |
| 27 | Construction of earthen shoulder. Construction of subgrade and earthen shoulderwith lead upto 1000m as per technical specification clause 303.1. |
| 28 | Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC : 8 fixing in position including painting and printing, etc. as per drawing and Technical specification clause 1703. i)5th kilometre stone (precast) |
| 29 | ii) Ordinary kilometre stone (precast) |
| 30 | iii)200m stone (precast) |
| 31 | Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC : 25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical specification clause 1704. |
| 32 | Painting two coats including primer coat after fillingthe surface with synthetic enamel paint in all shades on new plastered surfaces as per drawing and Technical specification clause 1701.( For boundary pillars ) |
| 33 | Providing and fixing of retro-reflectorised cautionery, mandatory and informatory sign as per IRC : 67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over alluminium sheeting 1.5mm thick supported on mild steel angle iron post 75x75x6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450mmx 450mmx 600mm, 600mm below ground level as per drawing and Technical specification clause 801. (ii) 60cm equilateral Triangle Speed limit |
| 34 | Right/Left hand curve |
| 35 | School |
| 36 | Men at work |
| 37 | Falling Rocks |
| 38 | Total = |
| 39 | Providing and erecting direction and place identification retro-reflectorised sign as per IRC : 67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over alluminium sheeting 2mm thick with area not exceeding 0.9sqm supported on Destination sign |
| 40 | Place identification sign |
| 41 | Advance direction sign |
| 42 | Direction sign |
| 43 | Total = |
| 44 | Earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, etc (ii) Ordinary rock (i) Upto 3m depth |
| 45 | Providing and laying parapet with pcc M15 as per drawing and technical specification clause 800 and 1208.4 (i) Nominal mix 1:2.5:5(Hand Mixing) |
| 46 | Plastering with cement mortar (1:3) 15mm thick works as perdrawing and technical specification clauses 613.4 and 1204 |
| 47 | Routine Maintenance of Road for a perion of 5(Five) years after Completion of works.AMC for 1st Year 1st Year Maintenance |
| 48 | 2nd Year Maintenance |
| 49 | 3rd Year Maintenance |
| 50 | 4th Year Maintenance |
| 51 | 5th Year Maintenance |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
