Grama Panchayat has published Tender For Supply Materials For Construction Of Anganavadi Kayyelikkal W-5 I Thamarassery Gp. Submission Date for this Tender is 14-02-2024. Construction Material Tenders in thamarassery Kerala. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | construction of anganavadi |
2 | Structural steel such as tees, angles, channels and R.S. joists |
3 | Red oxide Zinc chromate primer |
4 | Sundries |
5 | Adjustable telescopic prop 3 m (2.02-3.75m) |
6 | Beam clamp 300-380 mm (450-1070 mm) |
7 | Stone Aggregate(single size):20 mm nominal size |
8 | Stone Aggregate(single size): 10 mm nominal size |
9 | Coarse sand (zone III) |
10 | Portland Cement |
11 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
12 | Vibrator (Needle type 40 mm) |
13 | Stone for masonry work |
14 | Laterite stone of size 35x20x20cm |
15 | Solid blocks of size 40x20x10cm |
16 | Stone Aggregate(single size): 40 mm nominal size |
17 | Second class kail wood in planks |
18 | Second class kail wood in scantling |
19 | Hollock ballies 125 mm diameter |
20 | Adjustable span ESO+SI (2.35-3.40) |
21 | Twisted steel/deformed bars |
22 | Average rate of mild steel round bars for reinforcements |
23 | Stone Aggregate(single size): 06 mm nominal size |
24 | Mild steel round bar 12 mm dia and below |
25 | Flats up to 10 mm in thickness |
26 | Plasticizer / super plasticizer |
27 | Production cost of concrete by batch mix plant |
28 | Pumping charges of concrete including Hire charges of pump, piping work & accessories etc. |
29 | Bright finished or black enameled mild steel butt hinges 75x47x1.70 mm |
30 | Wall form panel 1250x450xmm |
31 | Corner angle 45x45x5 mm 2.50 long |
32 | Column clamp 450x1070 mm |
33 | Prop 2 m (2-3.5m) |
34 | Fine sand (zone IV) |
35 | Multi surface paint |
36 | Special primer (C.W) |
37 | Mild Steel round bar above 12 mm dia |
38 | Anjili wood scantls |
39 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
40 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
41 | Bright finished or black enameled mild steel screws 40 mm |
42 | Bright finished or black enameled mild steel screws 20 mm |
43 | Brass mortice latch and lock 100 x 65 mm with6 levers and a pair of brass lever handles |
44 | 50 mmx42 mmx2 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish |
45 | 24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish |
46 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
47 | Plastic emulsion paint |
48 | Vitrified floor tile 60x60 cm |
49 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
50 | Vitreous China orrisa type w.c. pan size 580 mm |
51 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
52 | 100 mm S.C.I. trap with vent heel |
53 | Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers |
54 | Vitreous china pedestal type wate closet |
55 | Vitreous china flat back wash basin 550x400 mm |
56 | 15 mm C.P.brass tap |
57 | C.P. brass waste 32 mm |
58 | C.I. bracket for wash basin and sinks |
59 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
60 | Brass bib-cock-15 mm dia |
61 | PTMT - Soap Dish/Holder 138x102x75 mm |
62 | PVC pipe 25 mm outer dia. 10kgf cm2 |
63 | PVC pipe 32 mm outer dia. 10Kgf/cm2 |
64 | PVC pipe 110 mm outer dia. 4kgf/cm2 |
65 | wall form panel 1250x500 mm |
66 | 100 mm channel shoulder 2.5 m long |
67 | Double clip (bridge clip) |
68 | Single clip |
69 | M.S. Tube 40 mm dia |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail