Grama Panchayat has published Tender For Supply Material For Construction Of Kitchen Dining In Chembra Glps In Thamarasery Gp. Submission Date for this Tender is 14-02-2024. Construction Material Tenders in thamarassery Kerala. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | construction of anganavadi |
2 | Stone Aggregate(single size): 40 mm nominal size |
3 | Stone Aggregate(single size):20 mm nominal size |
4 | Coarse sand (zone III) |
5 | Portland Cement |
6 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
7 | Vibrator (Needle type 40 mm) |
8 | Sundries |
9 | wall form panel 1250x500 mm |
10 | Corner angle 45x45x5 mm 1.50 m long |
11 | 100 mm channel shoulder 2.5 m long |
12 | Double clip (bridge clip) |
13 | Single clip |
14 | M.S. Tube 40 mm dia |
15 | Twisted steel/deformed bars |
16 | Wall form panel 1250x450xmm |
17 | Corner angle 45x45x5 mm 2.50 long |
18 | Column clamp 450x1070 mm |
19 | Prop 2 m (2-3.5m) |
20 | Structural steel such as tees, angles, channels and R.S. joists |
21 | Red oxide Zinc chromate primer |
22 | Adjustable span ESO+SI (2.35-3.40) |
23 | Adjustable telescopic prop 3 m (2.02-3.75m) |
24 | Beam clamp 300-380 mm (450-1070 mm) |
25 | Stone Aggregate(single size): 10 mm nominal size |
26 | Royalty for good earth |
27 | Solid blocks of size 40x20x15cm |
28 | Average rate of mild steel round bars for reinforcements |
29 | Stone Aggregate(single size): 06 mm nominal size |
30 | Mild steel round bar 12 mm dia and below |
31 | Flats up to 10 mm in thickness |
32 | Anjili wood scantls |
33 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
34 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
35 | Bright finished or black enameled mild steel screws 40 mm |
36 | Bright finished or black enameled mild steel screws 20 mm |
37 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
38 | Vitreous china flat back wash basin 550x400 mm |
39 | 15 mm C.P.brass tap |
40 | C.P. brass waste 32 mm |
41 | C.I. bracket for wash basin and sinks |
42 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
43 | Brass bib-cock-15 mm dia |
44 | PVC pipe 32 mm outer dia. 10Kgf/cm2 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail