Public Works Department-PWD has published General-Budget 2020-21: Town Improvement Works - Development Of Muzhappala Town Including Related Roads Of Panayathamparamba Appakkadavu Road With Its Beautification Under Pwd Roads Section Kannur By Providing Cc Drains, Fixing Of Handrails And Footpath I. Submission Date for this Tender is 16-02-2024. Drainage Tenders in kannur Kerala. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Footpath Lighting |
| 2 | 14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres. |
| 3 | 14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement). |
| 4 | OD258047/2022-2023:Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete .Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 5 | 14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required. |
| 6 | OD258048/2022-2023:Supply installation testing commissioning of 3 Mtr Black PU painted Galvanised pole (Ø76mmx3.2mm ‘A’ class)in different cross section with gold colour painted decorative cast aluminium rings .Base plate is welded to pole(Ø140mmx5 mm ‘B' class) with 4 nos. mounting holes . 16mm diameter (4 numbers) foundation bolts of 450mm bolt length, 200mm pitch circle diameter manufactured from special steel along with nuts, washers, anchor plate and common template. suitable for 3Mpoles ,Integral connector block for loop in loop out is flushed in bottom section of the pole. ( Bajaj make BJPL 01 300 Eco/ Kesslec 3m ECO-70/90 spigot or equivalent) |
| 7 | OD58595/2023-2024:Supply Conveyance, installation, testing and commissioning ofLED Decorativepost top lantern fittings directly on the existing pole out put not less than 5200 lumenwith Pressure Cast aluminium PU Painted housing with casted aluminium heat sink. Optical grade PC diffuser. Constant current electronic driver provided with high voltage, open & short circuit protection. IP 65 Protected power factor >0.9. THD< 10%,Overall system efficiency not less than 130 lm/W (Make Bajaj make small borragewarm white/K-Lite ID 4518 warm white or equivalent) |
| 8 | 90.12.5.2:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 6 sq mm |
| 9 | 9.1.1:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm) |
| 10 | 90.6.5.11:Supply and drawing the following sizes of multi-core PVC insulated & FRLSPVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm |
| 11 | 90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size |
| 12 | 2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 13 | 90.16.1.10:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.25 mm GI conductor (10 SWG) |
| 14 | 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) |
| 15 | 90.16.2.3:Supply and laying of the following sizes of B class GIpipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.32 mm dia G.I pipe ( medium class) |
| 16 | OD37232/2023-2024:Hire and Labour charges for Concreate/Tar road cutting as required. |
| 17 | 90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) |
| 18 | 90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet |
| 19 | 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board |
| 20 | 2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 21 | 2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps |
| 22 | OD230142/2023-2024:Supply and fixing Time switch 240V AC DIN/BASE mounting(L&T J648B1Analog version)/Hagerin the existing enclosure and giving connection as required |
| 23 | OD230143/2023-2024:Supply and fixing 25A AC3, MNX 25, 2 Pole power contactor (L&T) conforming to IS/IEC 60947-4-1 & IEC60947-4-1 in the existing enclosure and giving connection as required |
| 24 | OD230172/2023-2024:Supply and fixing 32A HRC Fuse base with HRC fuse link |
| 25 | OD230174/2023-2024:Supply and fixing of Neutral link 32A, 2 way neutral links mounted on DMC/SMC base. |
| 26 | OD231566/2023-2024:Supply and fixing of Danger 415 V, 150 x 100 mm aluminium anodised legend plates as required. |
| 27 | 1.17.20:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm |
| 28 | 90.6.4.1:Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.1.00 sq.mm 1 Run |
| 29 | 5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 30 | OD230178/2023-2024:Supply and providing test joint for the earthing system using 2Nos of the following sizes of strips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe eteas required. 2 x 25 x 3 mm GI strip |
| 31 | OD230180/2023-2024:Supply and providing earth lead from the test joint to the earth electrode using the following sizes of conductors/strips including cutting,drilling necessary holes(in case of strip) and fixing firmly with plate test joint etc as required.25 mm x 3 mm G.I Strip. |
| 32 | OD230184/2023-2024:Supply and fixing 32mm dia 6Kgff/cm2 PVC Pipe including fixing the pipe with clamp/clips at 60cm spacing. etc. as required (for service pipe) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
