Military Engineer Services-MES has published Tender For Repairs/ Maintenance/Servicing Of Dg Sets And Amf Panels Including Dg Panel Controls, Contactors And Allied Works In The Area Of Age E/M (North) Under Ge (North) Pune. Submission Date for this Tender is 04-03-2024. Contactors Tenders in pune Maharashtra. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 26-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-03-2024 |
Sl. No. | Item Description |
1 | Maintenance and servicing to DG setincluding cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based)includingreplacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels of capacity 380 KVA DG set installed at Southern Command Signal Centrecomplete all as directed by Engr- in- Charge. Note:- (i)Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iii)The work of maintenance shall be carried out through respective authorized dealer whose certificate shall be produced to Engineer - in - charge (iv) Proper record & test results of the same shall be maintained as directed (v)Work shall be carried out at site at different location |
2 | All as per serial item No.1.00 here-in-before but capacity 250 KVA DG set installed at PCDA Southern Command. |
3 | All as per serial item No.1.00 here-in-before but capacity 200 KVA DG set installed at Old Telephone Exchange. |
4 | All as per serial item No.1.00 here-in-beforebut capacity 200 KVA DG set installed at SC Signal Centre. |
5 | All as per serial item No.1.00 here-in-beforebut capacity 200 KVA DG set installed at Sewage Treatment Plant. |
6 | All as per serial item No.1.00 here-in-beforebut capacity 125 KVA DG set installed at RSI Swimming pool. |
7 | All as per serial item No.1.00 here-in-beforebut capacity 125 KVA DG set installed at SCOM Pump House. |
8 | All as per serial item No.1.00 here-in-beforebut capacity 125 KVA DG set installed at Star Auditorium. |
9 | All as per serial item No.1.00 here-in-beforebut capacity 125 KVA DG set installed at Old telephone exchange. |
10 | All as per serial item No.1.00 here-in-beforebut capacity 110 KVA DG set installed at Old telephone exchange. |
11 | All as per serial item No.1.00 here-in-beforebut capacity 110 KVA DG set installed at Old telephone exchange. |
12 | All as per serial item No.1.00 here-in-beforebut capacity 100 KVA DG set installed at Old telephone exchange. |
13 | All as per serial item No.1.00 here-in-beforebut capacity 82.50 KVA DG set installed at Old telephone exchange. |
14 | All as per serial item No.1.00 here-in-beforebut capacity 70 KVA DG set installed at CE PZ Pump House. |
15 | All as per serial item No.1.00 here-in-beforebut capacity 63 KVA DG set at Old telephone Exchange. |
16 | All as per serial item No.1.00 here-in-beforebut capacity 62.50 KVA DG set installed at MES IB. |
17 | All as per serial item No.1.00 here-in-beforebut capacity 62.50 KVA DG set installed at Victoria Road Pump House. |
18 | All as per serial item No.1.00 here-in-beforebut capacity 62.50 KVA DG set installed at 64 Pump House. |
19 | All as per serial item No.1.00 here-in-beforebut capacity 62.50 KVA DG set installed at IFA HQSC. |
20 | All as per serial item No.1.00 here-in-beforebut capacity 50 KVA DG set installed at Sport Complex (Milka singh) Pump House. |
21 | All as per serial item No.1.00 here-in-beforebut capacity 50 KVA DG set installed at MAP JCOs Race Course Pump House. |
22 | All as per serial item No.1.00 here-in-beforebut capacity 50 KVA DG set installed at RSI Swimming pool. |
23 | All as per serial item No.1.00 here-in-beforebut capacity 50 KVA DG set installed at Parbatali Auditorium. |
24 | All as per serial item No.1.00 here-in-before but capacity 50 KVA DG set installed at Ghorpadi No 1 Pump House. |
25 | All as per serial item No.1.00 here-in-beforebut capacity 25 KVA DG set installed at MES colany Pump House. |
26 | All as per serial item No.1.00 here-in-beforebut capacity 20 KVA DG set installed at Manoj Pandey Pump House. |
27 | All as per serial item No. 1.00 here-in-beforebut capacity 20 KVA DG set installed at Shanti Vihar Pump House. |
28 | All as per serial item No.1.00 here-in-beforebut capacity 15 KVA DG set installed at Nirman Vihar Pump House. |
29 | All as per serial item No.1.00 here-in-beforebut capacity 15 KVA DG set installed at HQ SWAC. |
30 | All as per serial item No.1.00 here-in-beforebut capacity 15 KVA DG set installed at 64 Pump House. |
31 | All as per serial item No.1.00 here-in-beforebut capacity 7.5 KVA DG set installed at HQ SWAC. |
32 | M & L forattending emergent complaint on call basis within 8 hrs of complaint lodging with the contractor for 15 kva to 380 kva dg sets and repairs to DG sets including carrying out minor repairs etc as required to make the system in order/ functional andcomplete all as specified and as directed. Note: (i) Rate inclusive of minor nut bolt ,cleaning cloth,grease etc. |
33 | Supply only diesel filter element with "O" ring suitable for 380/250 KVA DG set complete all as specified. |
34 | Supply only diesel filter element with "O" ring suitable for 200/160/150KVA DG set complete all as specified. |
35 | Supply only diesel filter element with "O" ring suitable for 125 KVA DG set complete all as specified. |
36 | Supply only diesel filter element with "O" ring suitable for 110/100KVA DG set complete all as specified.. |
37 | Supply only diesel filter element with "O" ring suitable for capacity 82.50/70 KVA DG setcomplete all as specified. |
38 | Supply only diesel filter element with "O" ring suitable for capacity 63/62.50 KVA DG setincluding removal of existing unserviceable one complete all as specified. |
39 | Supply only diesel filter element with "O" ring suitable for capacity 50 KVA DG set complete all as specified. |
40 | Supply only diesel filter element with "O" ring suitable for capacity 25/20 KVA DG set complete all as specified. |
41 | Supply only diesel filter element with "O" ring suitable for capacity 15 KVA DG set complete all as specified. |
42 | Supply only by pass filter element with "O" ring suitable for 380 KVA DG set complete all as specified. |
43 | Supply only by pass filter element with "O" ring suitable for 110/100KVA DG set complete all as specified. |
44 | Supply only Lubricantfilter element with "O" ring suitable for 380/250 KVA DG set complete all as specified. |
45 | Supply only Lubricantfilter element with "O" ring suitable for 200/160/150KVA DG set complete all as specified. |
46 | Supply only Lubricantfilter element with "O" ring suitable for 125 KVA DG set complete all as specified. |
47 | Supply only Lubricantfilter element with "O" ring suitable for 110/100KVA DG set complete all as specified.. |
48 | Supply only Lubricantfilter element with "O" ring suitable for capacity 82.50/70 KVA DG setcomplete all as specified. |
49 | Supply only Lubricantfilter element with "O" ring suitable for capacity 63/62.50 KVA DG setincluding removal of existing unserviceable one complete all as specified. |
50 | Supply only Lubricantfilter element with "O" ring suitable for capacity 50 KVA DG set complete all as specified. |
51 | Supply only Lubricantfilter element with "O" ring suitable for capacity 25/20 KVA DG set complete all as specified. |
52 | Supply only Lubricantfilter element with "O" ring suitable for capacity 15 KVA DG set complete all as specified. |
53 | Supply only by pass filter element with "O" ring suitable for 380 KVA DG set complete all as specified. |
54 | Supply only by pass filter element with "O" ring suitable for 110/100KVA DG set complete all as specified. |
55 | Supply only air filter element suitable for 380/250 KVA DG set complete all as specified. |
56 | Supply only air filter element suitable for 200 to 150KVA DG set complete all as specified. |
57 | Supply only air filter element suitable for 125 KVA DG set complete all as specified. |
58 | Supply only air filter element suitable for 110/100KVA DG set complete all as specified. |
59 | Supply only air filter elementsuitable for capacity 82.50/70 KVA DG setcomplete all as specified. |
60 | Supply only air filter element suitable for capacity 63/62.50 KVA DG setcomplete all as specified. |
61 | Supply only air filter elementsuitable for capacity 50 KVA DG set complete all as specified. |
62 | Supply only air filter element suitable for capacity 25/20 KVA DG set complete all as specified. |
63 | Supply only air filter element suitable for capacity 15 KVA DG set complete all as specified. |
64 | Supply only fan belt complete suitable for 380/250 KVA DG set complete all as specified. Make: Fenner/ Dunlop. |
65 | Supply only fan belt complete suitable for 200 to 150 KVA DG set compete all as specified. Make : Fenner/ Dunlop. |
66 | Supply only fan belt complete suitable for 125 KVA DG setcomplete all as specified. Make : Fenner/ Dunlop. |
67 | Supply onlyfan beltcomplete suitable for 110/100KVA DG set complete all as specified. Make : Fenner/ Dunlop. |
68 | Supply onlyfan belt complete suitable for capacity 82.50/70 KVA DG setcomplete all as specified. Make : Fenner/ Dunlop. |
69 | Supply only fan belt complete suitable for capacity 63/62.50 KVA DG setcomplete all as specified. Make : Fenner/ Dunlop. |
70 | Supply onlyfan belt complete suitable for capacity 50 KVA DG set complete all as specified. Make : Fenner/ Dunlop. |
71 | Supply onlyfan belt complete suitable for capacity 25/20 KVA DG set compete all as specified. Make : Fenner/ Dunlop. |
72 | Supply onlyfan belt complete suitable for capacity 15 KVA DG set complete all as specified. Make : Fenner/ Dunlop. |
73 | Supply onlybelt for battery charging alternator complete suitable for 380/250 KVA DG set complete all as specified. Make : Fenner/ Dunlop. |
74 | Supply onlybelt for battery charging alternator complete suitable for 200 to 150 KVA DG set complete all as specified. Make : Fenner/ Dunlop. |
75 | Supply onlybelt for battery charging alternator complete suitable for 125 KVA DG set complete all as specified. Make : Fenner/ Dunlop. |
76 | Supply onlybelt for battery charging alternator complete suitable for 110/100KVA DG set complete all as specified. Make : Fenner/ Dunlop. |
77 | Supply onlybelt for battery charging alternator complete suitable for capacity 82.50/70 KVA DG set complete all as specified. Make : Fenner/ Dunlop. |
78 | Supply onlybelt for battery charging alternator complete suitable for capacity 63/62.50 KVA DG set complete all as specified. Make : Fenner/ Dunlop. |
79 | Supply onlybelt for battery charging alternator complete suitable for capacity 50 KVA DG set complete all as specified. Make : Fenner/ Dunlop. |
80 | Supply onlybelt for battery charging alternator complete suitable for capacity 25/20 KVA DG set complete all as specified. Make : Fenner/ Dunlop. |
81 | Supply onlybelt for battery charging alternator complete suitable for capacity 15 KVA DG set complete all as specified. Make : Fenner/ Dunlop. |
82 | Supply onlyrubber hose pipe set for water circuit with clamps complete suitable for 380/250 KVA DG set complete all as specified. |
83 | Supply onlyrubber hose pipe set for water circuit with clamps complete suitable for 200/160 KVA DG set complete all as specified. |
84 | Supply onlyrubber hose pipe set for water circuit with clamps complete suitable for 125 KVA DG set complete all as specified. |
85 | Supply onlyrubber hose pipe set for water circuit with clamps complete suitable for 110/100KVA DG set complete all as specified. |
86 | Supply onlyrubber hose pipe set for water circuit with clamps complete suitable for capacity 82.50/ 70 KVA DG set complete all as specified. |
87 | Supply onlyrubber hose pipe set for water circuit with clamps complete suitable for capacity 63/62.50 KVA DG set complete all as specified. |
88 | Supply onlyrubber hose pipe set for water circuit with clamps complete suitable for capacity 50 KVA DG set complete all as specified. |
89 | Supply onlyrubber hose pipe set for water circuit with clamps complete suitable for capacity 25/20 KVA DG set complete all as specified. |
90 | Supply onlyrubber hose pipe set for water circuit with clamps complete suitable for capacity 15 KVA DG set complete all as specified. |
91 | Supply onlyEngine oil, multi grade premium Genuine oil 15W/ 40 as per manufacturer recommendations in DG sets complete all as specified. Make : Indian oil/ Hindustan Petrolium/ Castrol/ BPCL. |
92 | Supply and applying for petrolium Jelly (01 Kg plastic sealed container) complete all as specified and as directed. Make : Indian oil/ Hindustan Petrolium/ Castrol/ BPCL. |
93 | Supply and fill for distilled water for topping up in lead acid batteries complete all as specified and as directed. |
94 | Supply and fill for electrolyte of suitable specific gravity for lead acid batteries in sealed container complete all as specified and as directed. |
95 | Supply and fill for genuine coolant in 5 litres plastic sealed containerfor topping up in Radiator of DG set located at different locations complete all as specified and as directed. |
96 | Material and labour for battery leads of PVC insulated, multistranded, copper conductor of size 50 Sqmm of 1.25 metres long each duly fixed with brass clamps, copper lugs suitable for DG set batteries installed at different locations including removal of existing unserviceable one complete all as specified and as directed. |
97 | Material and labour for battery teriminal brass clamps including removal of existing unserviceable one compete all as specified and as directed. |
98 | Material and labour for disconnecting all electrical connections from DG set alternator of any capacity from base plate by openingnuts & bolts keeping aside the alternator forinspection and taking out to work shop for rewinding includingtesting and commissioning completeall as specifiedand as directed. |
99 | Rewinding of alternator field coilwith super enamelled copper winding wire of class "F" insullation as per existing size and gauge including heating, varnishing and testing for capacity 7.50 KVA DG set to 15.00 KVA DG set. |
100 | All as per serial item No.69.00 here-in-before but for capacity 20.00 KVA DG set to 25.00 KVA DG set. |
101 | All as per serial item No.69.00 here-in-before but for capacity 50.00 KVA DG set to 82.50 KVA DG set. |
102 | All as per serial item No.69.00 here-in-before but for capacity 100.00 KVA DG set to 125.00 KVA DG set. |
103 | All as per serial item No.69.00 here-in-before but for capacity 150.00 KVA DG set to 200.00 KVA DG set. |
104 | All as per serial item No.69.00 here-in-before but for capacity 250 KVA DG set to 380 KVA DG set. |
105 | Material and labour for water temperature guage including sensor and cable complete as per sampleincluding removal of existing unserviceable one complete all as specified and as directed. |
106 | Material and labour for dismantaling the radiator and taking to work shop for overhauling & cleaning, de-scaling with alkaline based chemical , removal of leakage including soldering and welding, brazing as required and renewal of gaskets, nuts, bolts, mounting pads,hoses,clips, etc and refixing its original position for capacity of 7.50 KVAto 15.00 KVA DG set complete all as specified and as directed |
107 | All as per serial item No.76 here-in-befor but for capacity 20.00 KVA to 25.00 KVA DG set |
108 | All as per serial item No.76 here-in-befor but for capacity 40.00 KVA to 50.00 KVA DG set |
109 | All as per serial item No.76 here-in-befor but for capacity 62.50 KVA to 83.00 KVA DG set |
110 | All as per serial item No.76 here-in-befor but for capacity 100.00 KVA DG set to 125.00 KVA DG set |
111 | All as per serial item No.76 here-in-befor but for capacity 150.00 KVA to200.00 KVA DG set |
112 | All as per serial item No.76 here-in-befor but for capacity 250.00 KVA to 380.00 KVA DG set |
113 | Material and labour for repair and calibration of FIP and injectors from authorised dealer for petty repairs to make the FIP functional as per standard calibration procedure and norms including replacement of minor spares, gasket etcfor smooth functioning of FIP and refixing its original position includingtesting at site for capacity 7.50 KVA to 15.00 KVA DG set complete all as specified and as directed.Note :- A certificate to the effect that the calibration and repairs has been carried out by the authorised dealer shall be submitted by the contractor. |
114 | All as per serial item No.83.00 herer-in-before but for 20.00 KVA to 25.00 KVA DG set |
115 | All as per serial item No.83.00 herer-in-before but for 40.00 KVAto 50.00 KVA DG set |
116 | All as per serial item No.83.00 herer-in-before but for 62.50 KVA to 83.00 KVA DG set |
117 | All as per serial item No.83.00 herer-in-before but for 100.00 KVAto 125.00 KVA DG set |
118 | All as per serial item No.83.00 herer-in-before but for 150.00 KVAto200.00 KVA DG set |
119 | All as per serial item No.83.00 herer-in-before but for 250.00 KVAto 380.00 KVA DG set |
120 | Material and labour for repair/ overhauling of self starting system of DG set including replacement of carbon brushes, bearings, bushes, rewinding of armature and field coil etc and varnishing of capacity 24 volts with necessary connectionsincluing testing and commissioing complete all as specified and as directed. |
121 | Material and labour for repair/ overhauling of self starting system of DG set including replacement of carbon brushes, bearings, bushes, rewinding of armature and field coil etc and varnishing of capacity 12 volts with necessary connectionsincluing testing and commissioing complete all as specified and as directed. |
122 | Material and labour for repairing ofbattery charging alternator engine mounted with replacement of any of the unserviceable part such as rectifier with voltage regulator, diode plate, corbon brushes of capacity 24 volts including testing and commissioing complete all as specified and as directed. |
123 | Material and labour for repairing ofbattery charging alternator engine mounted with replacement of any of the unserviceable part such as rectifier with voltage regulator, diode plate, corbon brushes of capacity 12 volts including testing and commissioing complete all as specified and as directed. |
124 | Supply and fix in repairs for battery charging circuit suitable for 24 volts, DC in existing DG set panel board including addition/ alteration in wiring system complete with auto transformer, diodes, filter circiut, condensers, DC ammeter, DC volt meter with selector switches and indicating bulbs etc complete all as specified and as directed. |
125 | Supply and fix in repairs battery charging circuit suitable for 12 volts, DC in existing DG set panel board including addition/ alteration in wiring system complete with auto transformer, diodes, filter circiut, condensers, DC ammeter, DC volt meter with selector switches and indicating bulbs etc complete all as specified and as directed. |
126 | Material and labour forAVR (automatic voltage regulator)control unitassembly suitable for 7.5 KVA to 82.5 KVA DG set including removal of existing unserviceable one compete all as specified and as directed. |
127 | Material and labour for AVR (automatic voltage regulator)control unitassembly suitable for 100 KVA to 380 KVA DG set including removal of exsting unserviceable one compete all as specified and as directed. |
128 | Material and labour for fuelbraided pipe with benjo bolts and washers etc of length 30 cm long including removal of existing unserviceable one compete all as specified and as directed. |
129 | Material nad labour for fuel braided pipe with benjo bolts and washers etc of length 45 cm long including removal of existing unserviceable one compete all as specified and as directed. |
130 | Material and labour for fuel braided pipe with benjo bolts and washers etc of length 60 cm long including removal of existing unserviceable one compete all as specified and as directed. |
131 | Material and labour for canopy hinges for aquastic doors with suitable bolts and nuts of DG set including removal of existing unserviceable one compete all as specified and as directed. |
132 | Material and labour for fuel feed pump with suitable bolts and nuts of DG set including removal of existing unserviceable one compete all as specified and as directed of following capacity |
133 | 15 to 110 KVA |
134 | 125 to 200 kVA |
135 | 250to 380 KVA |
136 | Material and labour for anti vibration pads with suitable bolts and washers including removal of existing unserviceable one compete all as specified and as directed. |
137 | Material and labour for carrying out repairs to AMF panel of 15 KVA to 200KVA DG set at various installation inclduing study, tracing out circuit, testing, replacing all defective parts, rewinding existing power and control wiring with same cables including testing and commissioning complete all as specified and as directed. (Note: Spares like Volt meter, CT, power contactor required for repair will be measuredand paid seperately under relevant items. |
138 | Supply onlyfor digital type frequency meter 96 x 96 mm flush/ square pattern compete all as specified. Make: L&T/ AE or equivalent. |
139 | Supply onlyfor digital type Ammeter 0-400 /5 Amps 96 x 96 mm square flush pattern with selector switch compete all as specified and as directed by Engr-in charge. Make: L&T/ AE or equivalent. |
140 | Supply only for digital type Ammeter 0-200 /5 Amps 96 x 96 mm square flush pattern with selector switch compete all as specified. Make: L&T/ AE or equivalent |
141 | Supply only for digital type Ammeter 0-100 /5 Amps 96 x 96 mm square flush pattern with selector switch compete all as specified. Make: L&T/ AE or equivalent. |
142 | Supply onlyfor digital type Voltmeter 0-500 Volts 96 x 96 mm square flush pattern with selector switch compete all as specified. Make: L&T/ AE or equivalent. |
143 | Supply only for LED indicator lamps R, Y, B with holder 15 mm screw type compete all as specified. Make: Rishab/ L&T/AE/ Legrand or equivalent |
144 | Supply only for CT cast resin type of ratio 400/5 Amps of suitable VA burden compete all as specified. Make: AE/ L&T/ Nutech/ Amol |
145 | Supply only for CT cast resin type of ratio 200/5 Amps of suitable VA burden compete all as specified. Make: AE/ L&T/ Nutech/ Amol |
146 | Supply and fix for CT cast resin type of ratio 100/5 Amps of suitable VA burden including removal of existing unserviceable one compete all as specified and as directed. Make: AE/ L&T/ Nutech/ Amol |
147 | Supply and fix 3 phase voltage monitoring relay DIN railof suitable VA burden including removal of existing unserviceable one compete all as specified and as directed. Make: Proton LVM 3P,L & T,ABB |
148 | Supply and fix forPower Contactor 415 Volt, 50 Hz AC suitable for DG set control panel/ AMF panel forcapacity of7.50 KVA to 15.00 KVA DG set including removal of existing unserviceable one compete all as specified and as directed.Make: Simens/ L&T/ ABB/ C&S/ Schneider. |
149 | All as per serial item No.118 here-in-before but for capacity of 20.00 KVAto 25.00 KVA DG set. |
150 | All as per serial item No.118 here-in-before but for capacity of 40.00 KVAto 50.00 KVA DG set. |
151 | All as per serial item No.118 here-in-before but for capacity of 62.50 KVA to 83.00 KVA DG set. |
152 | All as per serial item No.118 here-in-before but for capacity of 100.00 KVAto 125.00 KVA DG set. |
153 | All as per serial item No.118 here-in-before but for capacity of 150.00 KVA to200.00 KVA DG set . |
154 | All as per serial item No.118 here-in-before but for capacity of 250.00 KVA to380.00 KVA DG set . |
155 | Supply and fix for time delay relay suitable for 7.50 KVA to 83.00 KVA DG set including removal of existing unserviceable one compete all as specified and as directed.Make:- Simens/ L&T/ ABB/ C & S |
156 | Supply and fix for time delay relay suitable for100.00 KVAto 380.00 KVA DG set including removal of extg unserviceable one compete all as specified and as directed.Make: Simens/ L&T/ ABB/ C & S. |
157 | Material and labour for solenoid switch assembly 24 volts suitable for 100 KVA to 380 KVA DG set including removal of existing unserviceable one compete all as specified and as directed. |
158 | Material and labour for solenoid switch assembly 12 volts suitable for 7.5 KVA to 83 KVA DG set including removal of existing unserviceable one compete all as specified and as directed. |
159 | Material and labour for self starter assembly 12 volts complete suitable for 7.50 KVA to 83 KVA DG set including removal of existing unserviceable one complete all as specified and as directed. Make: Lucas/ TVS. |
160 | Material and labour for self starter assembly 24 volts complete suitable for 100 KVA to 380KVA DG set including removal of existing unserviceable one complete all as specified and as directed. |
161 | Material and labour forDC alternator assembly 24 volts suitable for 100 KVA to 380 KVA DG set including removal of existing unserviceable one compete all as specified and as directed. |
162 | Material and labour forDC alternator assembly 12 volts suitable for 7.50 KVA to 83 KVA DG set including removal of existing unserviceable one compete all as specified and as directed. |
163 | Material and labour for electronic speed control unitassembly 12 volts suitable for 7.50 KVAto 83 KVA DG set including removal of existing unserviceable one compete all as specified and as directed. |
164 | Material and labour for electronic speed control unitassembly 24 volts suitable for 100 KVA to 380 KVA DG set including removal of existing unserviceable one compete all as specified and as directed . |
165 | Material and labour fo SMPS (system main power supply) type control unitassembly suitable for 12 volts battery charger forincluding removal of extg unserviceable one compete all as specified . |
166 | Material and labour for SMPS (system main power supply) type control unitassembly suitable for 24 volts battery charger forincluding removal of existing unserviceable one compete all as specified and as directed . |
167 | Supply and fix for battery low maintenance lead acid of capacity 12 volts 180 AH with initial charging including removal of existing unserviceable one and hand over to store yard compete all as specified and as directed. Make: Exide/ AMCO/ Amaron. |
168 | Supply and fix for battery low maintenance lead acid of capacity 12 volts 150 AH with initial charging including removal of existing unserviceable one and hand over to store yard compete all as specified and as directed. Make: Exide/ AMCO/ Amaron. |
169 | Supply and fix for battery low maintenance lead acid of capacity 12 volts 135 AH with initial charging including removal of exsting unserviceable one and hand over to store yard compete all as specified and as directed. Make: Exide/ AMCO/ Amaron. |
170 | Supply and fix forbattery low maintenance lead acid of capacity 12 volts 100 AH with initial charging including removal of extg unserviceable one and hand over to store yard compete all as specified and as directed by Engr-in charge. Make:- Exide/ AMCO/ Amaron |
171 | Material and labour for control wiring of the DG set upto 125 KVA complete with provision of additional auto cables heavy duty suitable for generator set applications including removal of existing unserviceable one compete all as specified and as directed. |
172 | Material and labour for control wiring of the DG set above 125 KVA to 380 KVA complete with provision of additional auto cables heavy duty suitable for generator set applications including removal of existing unserviceable one compete all as specified and as directed. |
173 | Material and labour for top overhauling only of DG set of Kirloskar/ Cummins/ Crompton Greaves make including replacement of gaskets and Oil sump packing set etc, testing on full load upto entire satisfaction of Engineer-in-Charge for capacity of 7.50 KVA to 15.00 KVA DG set complete all specified and as directed. |
174 | All as per serial item No.143 here-in-before but capacity of 20.00 KVA to 25.00 KVA DG set |
175 | All as per serial item No.143 here-in-before but capacity of 40.00 KVAto 50.00 KVA DG set |
176 | All as per serial item No.143 here-in-before but capacity of 62.50 KVA to 83.00 KVA DG set |
177 | All as per serial item No.143 here-in-before but capacity of 100.00 KVAto 125.00 KVA DG set |
178 | All as per serial item No.143 here-in-before but capacity of 150.00 KVAto200.00 KVA DG set |
179 | All as per serial item No.143 here-in-before but capacity of 250.00 KVA to 380.00 KVA DG set |
180 | Supply and fix for solenoid valve suitable forcapacity of 7.50 KVA to 15.00 KVA DG set DG sets for smooth function of DG sets including removal of existing unserviceable onecomplete all specified and as directed . |
181 | All as per serial item No.150 here-in-before but capacity of 20.00 KVA to 25.00 KVA DG set. |
182 | All as per serial item No.150 here-in-before but capacity of 40.00 KVA to 50.00 KVA DG set. |
183 | All as per serial item No.150 here-in-before but capacity of 62.50 KVAto 83.00 KVA DG set. |
184 | All as per serial item No.150 here-in-before but capacity of 100.00 KVA to 125.00 KVA DG set. |
185 | All as per serial item No.150 here-in-before but capacity of 150.00 KVAto200.00 KVA DG set . |
186 | All as per serial item No.150 here-in-before but capacity of 250.00 KVAto 380.00 KVA DG set . |
187 | Material and labour for engine complete overhauling of DG set capacity 125 KVA to capacity 200 KVA of Kirloskar/ Crompton Greaves makes by opening the top cover complete including dismatling the engine head, cylinder liner and piston assembly, crank shaft assembly, radiator fan belt and radiator fan, gear assembly complete removing of engine side for repair/ replacement of parts i.e gasket, washer, "O" ring all types etc including grinding polishing of crank shaft , head repairing and overhauling valve seat cutting and replacing, valve tapping, head assemble and testing of DG set after necessary repair with and authorised dealer fix at site reassembling of DG set and testing on full load upto entire satisfaction of Engineer in Charge complete all as directed (Note : Spare parts will be measured and paid seperately under relevent items) |
188 | Supply onlypiston assembly |
189 | Supply only piston ring set |
190 | Supply only full engine gasket |
191 | Supply only main bearing set |
192 | Supply only main cylinder liner |
193 | Supply only main cylinder head copper sleeves |
194 | Supply only lock nut |
195 | Supply only big end bearing |
196 | Supply only timing belt |
197 | Supply only benjo bolt |
198 | Supply only timing belt tension adjuster |
199 | Supply only inlet valve |
200 | Supply only exhaust valve |
201 | Supply only head gasket |
202 | Supply only oil pump assembly |
203 | Supply only thrust washer |
204 | Supply only crank case gasket |
205 | Supply only head nozzle plug set |
206 | Material and labour for engine complete overhauling of DG set capacity 62.50 KVA to capacity 110 KVA of Kirloskar/ Crompton Greaves makes by opening the top cover complete including dismatling the engine head, cylinder liner and piston assembly, crank shaft assembly, radiator fan belt and radiator fan, gear assembly complete removing of engine side for repair/ replacement of parts i.e gasket, washer, "O" ring all types etc including grinding polishing of crank shaft , head repairing and overhauling valve seat cutting and replacing, valve tapping, head assemble and testing of DG set after necessary repair with and authorised dealer fix at site reassembling of DG set and testing on full load upto entire satisfaction of Engineer in Charge complete all as directed (Note : Spare parts will be measured and paid seperately under relevent items) |
207 | Supply onlypiston assembly |
208 | Supply only piston ring set |
209 | Supply only full engine gasket |
210 | Supply only main bearing set |
211 | Supply only main cylinder liner |
212 | Supply only main cylinder head copper sleeves |
213 | Supply only lock nut |
214 | Supply only big end bearing |
215 | Supply only timing belt |
216 | Supply only benjo bolt |
217 | Supply only timing belt tension adjuster |
218 | Supply only inlet valve |
219 | Supply only exhaust valve |
220 | Supply only head gasket |
221 | Supply only oil pump assembly |
222 | Supply only thrust washer |
223 | Supply only crank case gasket |
224 | Supply only head nozzle plug set |
225 | Supply and fix for pressure gauge 0 to 7 Kg/ sqcm along with sensor and cablesfor DG set including removal of existing unserviceable one complete all as specified and as directed. |
226 | Supply and fix microprocessor based multifunction controller with necessary accessories completesuitable for DG sets operation of any capacity and showing the various parameters such as volt, ampere, frequency, RPM etc complete as per manufacturer of DG set with site requirment including removal of existing unserviceable one complete all specified and as directed. |
227 | Supply, connecting and testing for MCCB inexisting DG set panel of capacity 3 pole 63 Amps with thermal magnetic release breaking capacity 16 KA, Ics=100% Icu , suitable for 415 volts, 50 Hz, with extended terminals type, inter locked to prevent opening when the Switch is in ON position, connecting and testing complete including removal of existing unserviceable complete all as specified and as directed.Make:L&T/ ABB/ Siemens/ Schneider as approved. |
228 | All as per serial item No.197.00 but capacity of 3 pole 100 Amps with thermal magnetic release breaking capacity 25 KA, Ics=100% Icu. |
229 | All as per serial item No.197.00 but capacity of3 pole 125 Amps with thermal magnetic release breaking capacity 25 KA, Ics=100% Icu. |
230 | All as per serial item No.197.00 but capacity of 3 pole 160 Amps with thermal magnetic release breaking capacity 25 KA, Ics=100% Icu. |
231 | All as per serial item No.197.00 but capacity of 3 pole 200 Amps with thermal magnetic release breaking capacity 25 KA, Ics=100% Icu. |
232 | All as per serial item No.197.00 but capacity of 3 pole 250 Amps with thermal magnetic release breaking capacity 36 KA, Ics=100% Icu. |
233 | All as per serial item No.197.00 but capacity of 3 pole 400 Amps with thermal magnetic release breaking capacity 36 KA, Ics=100% Icu. |
234 | Supply, connecting and testingopen execution on load change over inexisting DG set panel ofcapacity of 4 pole 63 Amps, suitable for 415 volts, 50 Hz, with extended terminals type, interlocked to prevent opening when the switch is in ON position, connecting and testing complete including removal of existing unserviceable complete all as specified and as directed.Make:ABB/ Siemens/ Schneider/ Legrand as approved. |
235 | All as per serial item No.204.00 but capacity of 4 pole 100 Amps. |
236 | All as per serial item No.204.00 but capacity of 4 pole 125 Amps. |
237 | All as per serial item No.204.00 but capacity of 4 pole 160 Amps. |
238 | All as per serial item No.204.00 but capacity of 4 pole 200 Amps. |
239 | All as per serial item No.204.00 but capacity of 4 pole 400 Amps. |
240 | Supplying and fixing 3mm thick, plain acrylic transparent sheet on DG set canopy including necessary neoprene gasket with all alteration at site incuding cutting, reaming etc. complete all as directed. |
241 | Supply and fix in repairs chromium plateddg set fuel tank lockwith appropriate keysas per the site requirement for dg set of capacity 15 kva to 380 kva |
242 | M & L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sq. mm 3.5core in repairs complete all as specified and as directedMake:Havells, Polycab, |
243 | M & L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 3.5core in repairs complete all as specified and as directedMake:Havells, Polycab, |
244 | Excavation in trench not exceeding 1.5 Mtr in depth and not exceding 1.5 Mtr in width and getting out in hard dense soil. |
245 | Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cms by using excavated soil. |
246 | Removing surplus soil to a distance not exceeding 50 m and depositing where directed at level not exc. 1.5 m above starting point. |
247 | S & F double wall corrugated high density polymer ethyl ( HDPE) pipe for laying of electric cable of90 mm inner dia with conforming to IS- 14930- 1 and 2, PE 63 of pressure rate 4 Kg/sq.cmlaid in trenches ,wall, floor,pole including bends, sockets and other connected accessories complete all as directed and specified by Engineer-in-charge. Make:Dura Line/Tijaria/REX/Astral |
248 | S & F double wall corrugated high density polymer ethyl ( HDPE) pipe for laying of electric cable of 63 mm outer dia and 51 mm inner dia with conforming to IS- 14930- 1 and 2, PE 63 of pressure rate 4 Kg/sq.cmlaid in trenches ,wall, floor,pole including bends, sockets and other connected accessories complete all as directed and specified by Engineer-in-charge. Make:Dura Line/Tijaria/REX/Astral |
249 | Supply and fix in repairs heat shrinkable LT straight through Joints of following specifications:- |
250 | 3-1/2 core 10-16 sq mm Make: 3M,Denson,Raychem |
251 | 3-1/2 core 25-35 sq mm Make: 3M,Denson,Raychem |
252 | M & L for shifting of 62.5/50 KVA dg set using necessary tools and plant by unscrewing all necessary nut bolts of earthing , carefully draing out the liquids (feul,engine oil, coolant) for reuseif required, unscrewing the cables etc of any capacity from the dg set and the panel and refixing the same / new one when shifting is completed , complete all as specified and as directed Location Victoria road pump house,NEW Rsi pump house |
253 | S & F in repairs zinc coated flexible bellow for dg set with following size |
254 | 50 mm bore |
255 | 80 mm bore |
256 | 100 mm bore |
257 | Supply , install,test in repaircubical outdoor type, weather type, weather proof IP-54 AMF Control panel fabricated out of 3.0 mm thick CRCA MS sheet for outer panel and 1.6 mm MS sheet for internal compartments,powder coated incorporating the following items including control wiring etc Mechanically and electrically interlocked : (a)Power Contactor - 04 Pole, 125 Amp, AC-1 Duty, Coil voltage, 240 V AC, 2NO+2NC AUX Contacts = 02 Nos. (b1)MCCB 4 pole 100 amps with themal magnetic settings-01 No (b2)MCCB 4 pole 63 amps with themal magnetic settings-01 No (b3) MCCB 4 pole 32 amps with themal magnetic settings-04 No ©Electronic KWH Meter, 5A-60A, 3x240V AC, 3 Phase 4 wire 50 Hz = 01 No. (96 x 96 mm flush mounting) (d)Current Transformer, CTR-150/5A, ACC-CL-1, 5A = 03 Nos (e)Current Transformer, CTR-150/5A, ACC-CL-5P10, 5VA = 01 No. (f)Electronic Earth Fault Relay, 5 A, 240V AC, 2 C/O Contacts, Surface Mounting with Test & Reset PB = 01 No. (g)Microprocessor Based (Controller Unit) 415 V AC, 3 Phase, 4 Wire, 50 Hz, Sensing for mains & DG (ALT.) Current Input 5 A, Protection U/V, O/V, O/F, for mains and DG (OC for DG only) Battery Voltage Low & Operating Voltage 8-32 V DC, DG Metering (A+V+Hz+PF+KWH) = 01 No. (h)Electronic Hooter 24 V DC, 96 x 96 Flush Mounting = 01 No. (j) Aux relay 12 V DC with LED, Free Wheeling Diode, 3/4 change over contacts at 10 A rating DIN Rail mounting and plugin base module type = 02 Nos. (k)Aux relay 12 V DC with LED, Free Wheeling Diode, 4 change over contacts at 5 A rating DIN Rail mounting and plugin base module type = 04 Nos. (l)Aux relay 12 V DC with LED, Free Wheeling Diode, 2 change over contacts at 5 A rating DIN Rail mounting and plugin base module type = 03 Nos. (m)AUX contactor, 240 V AC with suitable NO + NC Contacts = 01 No. (n)LED Indicating lamp 240 V AC = 02 Nos. (o)LED Indicating lamp 12 V DC = 02 Nos. (p)Push Button with elements = 07 Nos. (q)Stayput type Push Button with elements = 01 No. (mounted on accoustic enclosure) Note: (a) Suitable PCC plinth for mounting the AMF panel not less than 500 mm height from the ground with adequate space not less than 600 mm in front of the panelfor smooth operation shall be provided by the contractor for fixing the panel (b) Adequate space shall be provided for cable entry and exit. Add Necessary PCC plinth for mounting the DG set as per manufacture design. (c) The panel drawing to be approved by accepting officer before to place order. |
258 | (r)Control switch 2 Pole, 10 A, ON / OFF (DC supply) = 01 No. (s)Selector Switch 6 Pole, 2 way, 10 A, without Off (Auto / Manual ) = 01 No. (t)MCB SP, 10 Amp, 6/10 KA (C Curve) = 02 Nos. (u)MCB SP, 6 Amp, 6/10 KA (C Curve) = 01 No. (v)Glass Fuse Fitting 2A, Glass Fuse Links Drawout Type = 10 Nos. (w)Glass Fuse Fitting 2A, Glass Fuse Links Drawout Type (To be fitted in the panel) = 02 Nos. (x)Neutral Link 10 A, (Disconnectable type) = 06 Nos. Note: (a) Suitable PCC plinth for mounting the AMF panel not less than 500 mm height from the ground with adequate space not less than 600 mm in front of the panelfor smooth operation shall be provided by the contractor for fixing the panel (b) Adequate space shall be provided for cable entry and exit. Add Necessary PCC plinth for mounting the DG set as per manufacture design. (c) The panel drawing to be approved by accepting officer before to place order. |
259 | Supply and fix on replacement water lifting and booster pump 1.5 Hp single phase suction with necessary factory fabricated auxillary tank and discharge,( 25 mm x 25 mm ) total head upto 10-42mtr, capcity upto 75 - 6LPM monoblock, multiple noryl/brass impellar pump type suitable for 230 volts with all necessary fittings including copper cable upto 5mtr.Including removol of old unsv one complete all as specified and as directed Make kirloskar CPBS 84424H/V,KSB KSB KHM 406,Texmo ADBS 44 HS / 60L |
260 | S & F in repairs pressure control switch having ,IP 65 rating,dry running protection with automatic reset NoiselessDesigned for high start/stop per hour Built in thermal protection Make:Btalli,V guard,CRI |
261 | Supply and fix on replacement water lifting pump 0.25Hp single phase suction and discharge,( 19 mm x 19 mm ) total head upto15 mtr, capcity upto 600-1600 LPH monoblock pump type suitable for 230 volts with all necessary fittings including copper cable upto 5mtr.Including removol of old unsv one complete all as specified and as directed.Make kirloskar Tiny 63,Crompton ,KSB |
262 | Supply and fix on replacement on-line pressure boosting pump, outdoor, weather proof electrically operated 240 volts, 50 Hz fixed to 15/20 mm dia of capacity Head 10 mtrs Flow rate-35 LPMpower input 0.1 KW with three opearting position OFF/AUTO/MANNUL and componants of ceramic radial Ball Bearing, copper stator winding, EPDM rubber gasket, Aluminium oxide Shaft, carbon trust Ball Bearing, composit PP30% GF impeller including the integrated flow switch starts or stops the pump when a tapping point is turned on or off including, electrical connections, relaying of pipe lines, GI fittings, and removal of old unsv one complete all as specified and as directed. Make Wilo cat no.PB88,Kirloskar,KSB |
263 | Supply and fix on replacement on-line pressure boosting pump, outdoor, weather proof electrically operated 240 volts, 50 Hz fixed to 15/20 mm dia of capacity Head 16 mtrs Flow rate-50 LPMpower input 0.2 KW with three opearting position OFF/AUTO/MANNUL and componants of ceramic radial Ball Bearing, copper stator winding, EPDM rubber gasket, Aluminium oxide Shaft, carbon trust Ball Bearing, composit PP30% GF impeller including the integrated flow switch starts or stops the pump when a tapping point is turned on or off including, electrical connections relaying of pipe lines, GI fittings,GI fittings and removal of old unsv one complete all as specified and as directed.Make Wilo cat no. PB 200,Kirloskar,KSB |
264 | Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail