Grama Panchayat has published Tender For Material Supply For Kombankallu Anganvadi. Submission Date for this Tender is 16-02-2024. Construction Material Tenders in Palakkad Kerala. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 13-Feb-2024 | DATE EXTENTION | Date | 16-02-2024 |
Sl. No. | Item Description |
1 | Supplying variuos materials |
2 | Stone Aggregate(single size): 40 mm nominal size |
3 | Stone Aggregate(single size):20 mm nominal size |
4 | Coarse sand (zone III) |
5 | Portland Cement |
6 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
7 | Vibrator (Needle type 40 mm) |
8 | Sundries |
9 | Stone for masonry work |
10 | wall form panel 1250x500 mm |
11 | Corner angle 45x45x5 mm 1.50 m long |
12 | 100 mm channel shoulder 2.5 m long |
13 | Double clip (bridge clip) |
14 | Single clip |
15 | M.S. Tube 40 mm dia |
16 | Stone Aggregate(single size): 10 mm nominal size |
17 | Solid blocks of size 30x20x20cm |
18 | Solid blocks of size 30x20x15cm |
19 | Twisted steel/deformed bars |
20 | Structural steel such as tees, angles, channels and R.S. joists |
21 | Red oxide Zinc chromate primer |
22 | Adjustable span ESO+SI (2.35-3.40) |
23 | Adjustable telescopic prop 3 m (2.02-3.75m) |
24 | Beam clamp 300-380 mm (450-1070 mm) |
25 | Wall form panel 1250x450xmm |
26 | Corner angle 45x45x5 mm 2.50 long |
27 | Column clamp 450x1070 mm |
28 | Prop 2 m (2-3.5m) |
29 | Second class kail wood in planks |
30 | Second class kail wood in scantling |
31 | Hollock ballies 125 mm diameter |
32 | Fine sand (zone IV) |
33 | Vitrified floor tile 60x60 cm |
34 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
35 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
36 | Mild steel tubes electric resistant or induction butt welded |
37 | Mild steel round bar 12 mm dia and below |
38 | Flats up to 10 mm in thickness |
39 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
40 | Factory made glass reinforced plastic door frame 90x45 mm i/c carriage |
41 | 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage |
42 | Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm |
43 | Bright finished or black enameled mild steel screws 40 mm |
44 | Bright finished or black enameled mild steel screws 20 mm |
45 | Mild steel tubes hot finished welded type |
46 | Welding by electric plant |
47 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
48 | Multi surface paint |
49 | Special primer (C.W) |
50 | Synthetic enamel paint in black or chocolate shade |
51 | Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers |
52 | Vitreous china pedestal type wate closet |
53 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
54 | Vitreous China flat back wash basin 630x450 mm |
55 | 15 mm C.P.brass tap |
56 | C.P. brass waste 32 mm |
57 | C.I. bracket for wash basin and sinks |
58 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
59 | Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings |
60 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
61 | PVC pipe 110 mm outer dia 6kgf/cm2 |
62 | PVC pipe 15 mm outer dia 10kgf/cm2 |
63 | PVC pipe 20 mm outer dia 10 kfg/cm2 |
64 | PVC pipe 32 mm outer dia. 10Kgf/cm2 |
65 | PVC pipe 40 mm outer dia. 10kgf/cm2 |
66 | PVC pipe 63 mm outer dia . 6kgf/cm2 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail