Tender For Purchase And Installation Of Generator, Kannur-Kerala

Tender For Purchase And Installation Of Generator- 1 Generator puchase and installation 2 Generator - a)Make of Engine- Kirlosker/Ashok Leyland/Maheendra b) Type of Engine - Diesel Engine c) No of Cylinders - As per Manufactures standards d) Method of Cooling- Water Cooled with Radiator e) Aspiration Turbo Charged after Cooled f) Design- suitable for generating set operation 2.standard accessories with diesel engine a) fly wheel to suite flexible coupling b) close coupling c) air cleaner d) radiator with fan provided with fan card e) fuel pump f)mechanical governer g)fuel filter h) lubricating oil filter i) exhaust silencer j) exhaust muffler k)batter charger/ generator 3. engine instrument panel with the following items a) starting switch with key or button b)lubricating oil pressure gauge c) water temperature gauge d) RPM indicator with hour meter e) battery charging ammeter 4. Safety controls for Engine a) Trip for low lubricating oil pressure b) Trip high water temperature 6. brushless alternator a) make - Kirlosker/ Leypower Leroysomer/Crompton/ Stamford b) type- Self Exited and Self Regulated c) Capacity - 15 KVA/12 KW @ 0.8 PFd)system of voltage 3 phase, 4 wire, 415 V, e) frequency - 50 Hz f) insulation Class F/H the alternator sholud confirm to IS 4722 3 Excavation for foundation in soft soil including dressing of sides and Ramming of bottoms lift up to 1.5 m including getting out the excavated soil and disposal of surplus exacavated soil as directed within a lead of 50 meters. (2 cum) 4 Providing and laying in position cement concrete1:2:4 (1 cement: 2 coarse sand: 4 graded stonne aggregate 20 mm nominal size) in foundation of pump , DG set etc including form work etc as required (2 cum) 5 Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 14 (1 cement 4 coarse sand) at all levels, (1 cum) 6 Providing 15mm thick cement plaster of mix 1.4 (1 cement 4 fine sand) at all levels (1 sqm) 7 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3 15 mm copper conductor (10 SWG)(95 m) 8 Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required. 3.15 mm (10 SWG) (15 Nos) 9 Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board (20 KG) 10 Supply and providing the following size of B class MS Pipe conforming to relevant IS Specifications complete with heavy guage specials such as bends, flanges etc welded and fixed at appropriate locations, providing cork sheet in between the flanges at the joints, bolting the flanges together, painting the pipe, flange etc with 2 coats of heat resistant paint suitable for out door applications, fixing the pipe firmly with fabricated structute/ wall/any other mechanical support etc as required -80mm dia B class MS Pipe as extended exhaust pipe. (15 m) 11 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages, colour washing etc. as required. 4 core 16 sq mm with factory made clamp (20 m) 12 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME/STONE WARE/GI/DWC pipe as required. 4 core 16 sq mm (25 m) 13 Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size (20 m) 14 Supply and clamping the following sizes of B class G1 Pipe on wall with all required accessories & Clamps etc. including cutting and making good the walls, painting the exposed portions etc, 40mm dia. (5 m) 15 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of II KVgrade as required 4 X 16 sq mm (28mm) (4 set) 16 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc with charcoal/ coke and salt as required (3 set) 17 Providing and fixing 25 mm 3 mm G1 strip earth lead from the test joint to the earth plate (15 m) 18 Providing and fixing 225 mm 3mm GI strip test joint for earthing system(0.75 m) 19 supply and laying bare earthing conductors of the following sizes laid 0.6 m below ground level including excavating trench of suitable size and refilling etc. asrequired(in ordinary soil). 3.15mm copper conductor(10 SWG)Net Total 50.000metre (@126.82/metre (50 m) 20 Supply of high speed diesel. (40 litre) 21 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. 3 2.5 sq. Mm (25 m) 22 Supplying and fixing of following sizes of medium class PVC condust along with accessories in surface recess including cutting the wall and making good the same in case of recessed conduit as required 20 mm (25 m) 23 Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/recess including making good the damages, colour washing etc as required (RoHS comphant 13 module moulded plastic box on surface good 24 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 3 Module 25 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. 15/16 amp switch 26 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.6 pin 15/16 amp socket outlet 27 SITC of battery charger 12V 10A. 28 FIRE EXTINGUISHER , Supply, Installation, Testing &, Commissioning of ABC Type FireExtinguishers 6kg capacity Make Kanex/Minimax/Equivalent 29 OD162600/2023-2024 First Aid Chart 30 OD162601/2023-2024Danger 415 V, 250 X 200 mm Enameled danger plates (2 nos) 31 Approval charges Charges towards conducting load study of the existing installation,submitting the plan, scheme and other related papers to Electrical inspectorate and getting approval including all Laison charges (Excluding fees to be paid to electrical inspectorate/KSEB) 32 Charges for preparation of Electrical Schematic diagram in A3 sheet first copy for getting approval from Electrical Inspectorate.

INR 1300 /-

INR 9200.0 /-

INR 6.06 Lakhs /-