Military Engineer Services-MES has published Tender For Additional/Alternator To Various Toilets Block And Other Sanctioned Work At Hq Swac Vsn Chiloda Under Ge (Af) Chiloda. Submission Date for this Tender is 26-02-2024. Toilet Bathroom Tenders in chiloda Gujarat. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling wall and ceiling boards (fiber, pulp, insulation,false ceiling etc) or insulation board/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed |
| 2 | S & F for false ceiling with GI powder coated (white) of framed workgrid of size 32 mm x 15 mm x 3660 mm as main Tee, 32 mm x 15 mm x 660 mm as S/Tee, 32 mm x 15 mm x 1200 as L/Tee & wall angle of size 23mm x 19 mm x 3050 mm with and including 7 mm thick ecofriendly non asbestos designed ceiling board of size 600 x 600 mm width and including proper hanging arrangement with 4 mm dia anodised galvanised iron wire and adjuster complete all as specified and as directed by Engr In Charge. |
| 3 | S & F Application of Roofseal on the roof by cleaning the surface throughly, open the cracks, repair the surface and fill the surface with SBR and glass fibre mesh of 40 GSM and acrylic sealant for the same, apply Primeseal primer one coat as a priming coat and dry it for 5 to 6 hours. After that apply three coats of roof seal over the terrace surface at an interval of 6 to 7 hrs between each coat complete all as specified and as directed by Engr In Charge. |
| 4 | S & F for Customised ACP Sheet 3 mm thick of selected quality fixed to wooden or particle or plywood or concrete surface or brick surface including aluminium frame with necessary cleaning of surface and making surface even and smooth complete all as specified and directed. Note : The rates includes necessary scaffolding upto 10 meters height. |
| 5 | S&F 10 mm thick toughened /figured glass shutters (openable type) , with clear glass including diamond polishing, decorative glass film and all hardware fittings detailed as under, fixed in position including ledge and decorative glass film and Stainless steel top patch, Stainless steel top pivote , Stainless steel bottom patch, Glass to glass/wall magnetic/ Stainless Steel lock, Stainless Steel Handle2 Nos For Each shutter as per manufacturer instruction complete all as specified and directed. Make- Jaquar CAT No. JSE-CHR-OPTSDR1950SX or equivalent as approved by GE. |
| 6 | S & F in repairs rimless wall hung EWC with UF soft close seat cover with hinges and accessories set of size 390 x 570 x 365 mm complete all as specified and directed. Make: Jaquar Cat No:VGS WHT 81953 UF or equivalent as approved by GE. |
| 7 | Supply and fix in repairs single piece concealed cistern body (front or top actuation) with floor mounting frame, installation kit and p type drain pipe connection set for wall hung WC , fixed in position and connecting complete all as specified and directed. Make: Jaquar Cat No:JCS-WHT-2431FP or equivalent as approved by GE. |
| 8 | Supply and fix in repair white vitreous China wash hand basin table top (Flat back) of size 700 x 435 x 135 mm fixed on and including new brackets completescrewed down high Pressure, screwed shank and fly nuts, screwed for iron pipe, 32 mm size brass chromium plated waste coupling, 750 mm long PVC waste pipe, PVC connection pipe, 15 mm size and 450 mm long with PTMT nuts and washer at both end etc complete all as specified and as directed. Make: Jaquar Cat No:ARS WHT 39903 or equivalent as approved by GE. |
| 9 | S& F in repairs brass chromium plated shower rose 340 x 220 mm size with arms inlet complete all as specified and as directed. Make - Jaquar CAT NO. OHS1635 or equivalent as approved by GE. |
| 10 | S&F in repair Chromium plated corner glass shelf inch with bracket of size 9 inch complete all as specified and as directed. Make:-Jaquar CAT No. ACN 1173 or equivalent as approved by GE. |
| 11 | S&F SSLocks, drawer,grade I, size 75mm 4 levers complete all as specified and directed. |
| 12 | S&F mild steelMortice lock,vertical type, size100 mm 4 levers complete all as specified and directed. |
| 13 | S&F4 to 5 mm thick edge mirror selected quality, fixed on wall with nylon sleeve & cadmium plated screws & brackets complete all as specified and directed. |
| 14 | S&F in repair SS Grating of size 150 mm x 150 mm fixed with white or grey cement complete all as specified and directed. |
| 15 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 16 | M&L Granite Z black / Lakha red 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite (including moulding etc) complete all as specified and directed. |
| 17 | M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 18 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc,including removal of debries to a distance exc 1.5 Km but n. exc 2 Km. complete all as specified and directed. |
| 19 | M&L for rendering 15 mm thick in CM 1:6 on brick or stone walls to be finished even and smooth (without using extra lime or cement) complete all as specified and directed . |
| 20 | Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. |
| 21 | M&L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 22 | S&F 2nd class H.W Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 23 | Takingdown chowkats or frame exc 1.5 Sqm and n exc 4 Sqm each and removing complete all as specified and as directed |
| 24 | Takingdown chowkats or frame n. exc 1.5 Sqmeach and removing complete all as specified and as directed |
| 25 | S & F steel work in tubular trusses including special shaped washer etc.complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 complete all as specified and directed. |
| 26 | M&L cement concrete type C-1 (1:3:6) 20mm graded stone aggregate as in blocks for fixing hold fasts and fillling of chowkhats or any other purpose complete all as specified and directed. |
| 27 | M&L cement concrete type B2- (1:2:4) 20mm graded stone aggregate as Cement concrete in foundations,filling and mass concrete or any other purpose as in platform complete all as specified and directed. |
| 28 | S&F 30 mmin repair Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 29 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 30 | S & F in repair 30 mm mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 31 | M&L in repair for 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer"s instructions complete all as specified and as directed. |
| 32 | Supply & fix in repair 100mm long hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 33 | S&F in repair 200 mm size brass barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 34 | Supply and fix 250 mm long brass, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 35 | S&F in repair 150 mm long Extruded brass handles, fabricated type polishedhandle fabricatedtype all as specified and as directed by Engineer-In-Charge. |
| 36 | M&L in repair Floor door stopper of size 150 mm brass body and tongue, anodised, with rubber cover fixed in door complete all as specified and directed. |
| 37 | S&F in repairs door closer aluminium (die cast) body hydraulically regulated designation No. 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 38 | S&FPVC (SWR) pipes 75 mm diasingle socketed, in any length with rubber ring joints, fixed on floors complete all as specified and as directed. |
| 39 | S&FPVC (SWR) pipes 110 mm diasingle socketed, in any length with rubber ring joints, fixed on floors complete all as specified and as directed. |
| 40 | S&F in repair PVC (SWR) plain bend 110 mm dia of any radius with rubber ring joints, complete all as specified and as directed |
| 41 | S&F PVC (SWR) nahani trap 100 mm dia of outlet, including jointing to waste pipe, fixed in cement concrete (1:2:4) using 12.5 mm graded stone aggregate complete all as specified and directed. |
| 42 | S&F in repair 110 mm diaPVC (SWR) junction single,(Single T) equal or unequalcomplete all as specified and as directed. |
| 43 | Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed |
| 44 | S&F 15 mm bore dia GI tubing medium grade including all fitting fixed to walls and ceiling or laid in floor complete all as specified and directed. |
| 45 | M&L for cutting holes into or through stone/pcc block wall built cm. and making good in cm 1;3 or PCC type B-1 on required. Superficial area exc 150 sq.cm but 400 sq cm complete all as specified and directed. |
| 46 | S&F 32 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2, fixed as in spout pipe and making good disturbed surface in CM 1:3 complete all as specified and directed. |
| 47 | S&F in repairs plastic seat cover for rimless wall hung EWC with UF softwith hinges and accessories set for water closet, black, closed pattern with flat bottom with mild steel chromium plated or alluminised hinging device complete all as specified and directed by Engr-in-Charge. Make: Jaquar Cat No : ARS WHT 39903 or equivalent as approved by GE. |
| 48 | S&F in repair wall mounted Tubular towel rack, 20mm dia, D type, 60cm long between flanges chrome finish complete all as specified and directed. Make : Jaquar CAT No. AKP 35781PS or equivalent as approved by GE. |
| 49 | S&F in repair wall mounted Toilet Paper holder chrome finish complete all as specified and directed by Engr-in-Charge Make : Jaquar CAT No. AKP 35753 PS or equivalent as approved by GE. |
| 50 | S&Fin repair wall mounted Tumbler holder chrome finish complete all as specified and directed by Engr-in-Charge. Make : Jaquar CAT No. AKP 35741 P or equivalent as approved by GE. |
| 51 | S&F in repair wall mounted Tubular Towel rail, 20mm dia, between flanges chrome finish 600 mm long complete all as specified and directed by Engr-in-Charge. Make : Jaquar CAT No. AKP 35711 PS or equivalent as approved by GE. |
| 52 | S&F in repair wall mounted towel ringcomplete all as specified and directed by Engr-in-Charge Make : Jaquar CAT No. AKP 35721 P or equivalent as approved by GE. |
| 53 | S&F in repair wall mounted Soap dish holder complete all as specified and directed. Make : Jaquar CAT No. AKP 35731 P or equivalent as approved by GE. |
| 54 | S&F in repair Hand shower with 8mm dia 1.5 metre longeasy flex tube incl wall bracket hand shower and in chorme finish & wall hook complete all as specified and directed. Make : Jaquar CAT No. HSH1715 or equivalent as approved by GE. |
| 55 | S&F in repairs 15 mm dia Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. Make : JaquarCat No -VGP 81079 NK or equivalent as approved by GE. |
| 56 | S&F single lever tall body pillar tap 15 mm dia with 180 mm extension body with provision complete all as specified and directed Make : JaquarCat No -VGP 81005 NB or equivalent as approved by GE. |
| 57 | M&L in repairAngular stop cock 15 mm dia with wall flange complete all as specified and directed. Make : JaquarCat No -VGP 81053 or equivalent as approved by GE. |
| 58 | M&L in repair Bib cock 15 mm dia with wall flange complete all as specified and directed Make:- Jaquar CAT No VGP 81037 or equivalent as approved by GE. |
| 59 | Demolition of cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km complete all as specified and directed. |
| 60 | M&L for 25 mm thick plain cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in flooring in leveling course ,finishing cement concrete surface even and smooth without using extra cement complete all as specified by Engr in Charge. |
| 61 | M&L for light shade colour vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles n. exc 0.36 sqm in floors etc laid over and including 20 mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge. |
| 62 | Supply fabricate & fix in position aluminium powder coated tinted(minimum thickness of powder coating 50 micron of approved colour) three track window ( two shutters glazed & one shutters wiregauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concelled type lock for all three shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 mm (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 mm (Section No 20737) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 mm (Section No 20736) Note :- Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B |
| 63 | S & F for PVC ply 18 mm thick of selected quality fixed to wooden or particle or plywood or concrete surface or brick surface including PVC frame incl all necessary fitting with necessary cleaning of surface and making surface even and smooth complete all as specified and directed |
| 64 | M&L for complete removal of old paint using high pressure water jet machine and applying two coat of floor paint over a coat of primer on old surfaces of floor/path, terrace, roofusing roller brush etc complete all as specified and directed |
| 65 | M&L for 25mm thick cement concrete type B-1,1:2:4 (20mm graded aggregate) as in level course complete all as specified and directed. |
| 66 | M&L for Rectified non - skid ceramic coloured tiles 7 to 8 mm thick joint free, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 67 | M&L for Rectified ceramic digital dark and light coloured tiles in vertical surfaces of size 450mm X 300mm X 7mm / 600mm x300mm x 7mm thickthick set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed. |
| 68 | M&L for old size brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:6 complete all as specified and directed. |
| 69 | M&L for 10 mm thick rendering in CM 1:6 onconcrete surfaces / fair faces of brick masonary wall, finishedeven and smooth without using extra cement complete all as specified and directed. |
| 70 | M&L for new plastered surfaces of wall and applying two coats of oil bound distemper over chalk whiting on plastered surfaces preparotory to distemperingincluding preparation complete all as specified and directed. |
| 71 | Taking down chowkats with shutters of size n exc 1.5 sqm each (without taking off shutters from the frames) complete all as specified and directed. |
| 72 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 73 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC Sheet rainforced with MS square tube complete all as specified and directed. |
| 74 | S&F aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed. |
| 75 | S&F butt hinges 75mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21 complete all as specified and directed. |
| 76 | S&F aluminium handles 150mm size, cast type, anodised complete all as specified and directed. |
| 77 | S&F in repair vitreous china wash down water closet pan (pedestal pattern ) p or s type (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 78 | S&F in repair plastic water closet seat, white colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 79 | S&F in repair vitreous china squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) incl connection to trap , and to flush pipe etc complete including making good to floor complete all as specified and directed. |
| 80 | S&F in repair 10 litres capacityPVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed. |
| 81 | S&F in repair vitreous china urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 82 | S&F in repair vitreous china white wash hand basin 550 mm x 450 mm including all necessary fitting such as 15 mm CP pillar cock, CP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces, including taking down old wash hand basin complete all as specified and as directed. |
| 83 | S&F in repair fancy type Bib taps with chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and directed. |
| 84 | S&F in repair 15mm bore CP stop cock / angle cock fancy type long body complete all as specified and directed. |
| 85 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 86 | S&F in repair Health faucetmild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position completeall as specified and as directed. |
| 87 | Removing of existing filling in sunken floor of WC and repair to sunken floor with 50 mm thick PCC 1:2:4 , side wall15mm thick plastering in CM 1:3 of internal surface mixing with @ 3% WPC, over including 3mm thick APP membrane sheetnot less than 3.5 kg/sqm with bituminous primer, as per manufactureinstructionmaintain to proper slope towads mouth of spout pipe than filling with 40 to 20mm graded lime aggregate then filled with PCC 1:5:10 type E-2 using 40mm graded stone aggregate there after 50mm thick PCC 1:2:4 using 20mm graded aggregateand including 50mm bore GI water pipe light grade as in spout pipe including taking down and refixing in all drainage/seawage pipes in same position with lead jointscomplete all as specified and directed. (NOTE ;-WC, PVC pipe, socket & tiles shall be measured and paid separately) |
| 88 | M&L for crack filling with asian paints smart care crack seal (up to 3mm cracks and crack to be open in V Shape and then fill with suggested material,touch with asian paints acrylic distemper including ladder or other necessary fittings complete all as specified and directed. |
| 89 | S&F in repair vitreous china wash hand basin oval typeIvory superior colour over/under counterwash basin 560mm x 470mmx190mm complete all as specified and directed. (Make : Cat part No 52030104 of CERA or equivalent as approved by GE.) |
| 90 | S&F urinal spreader ofchromium platedany colour for fixing with 15 mm dia pipe complete all as specified and directed. (Make : Cat part No F8070201 of Cera or equivalent as approved by GE.) |
| 91 | S&F in repair quarter turn 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed. (Make : Cat Part No F1016101 of Cera or equivalent as approved by GE.) |
| 92 | S&F 15mm two way Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. (Make : Cat Part No F1116163 or equivalent as approved by GE.) |
| 93 | S&F 32mm PVC waste pipe for wash hand basin/urinal/sink 600mm long complete all as specified and directed. |
| 94 | S&F in repair 5.5mm thick glass,looking mirror size exc 0.5 sqmandnot exc 3 sqm of selected quality glass, mounted on 10 mm thick commercial ply woodwith chromium plated brass screws/ Brackets complete all as specified and directed. |
| 95 | S&F 18mm thick PVC Sheet one side prelaminated of approved texture (as in cabinet with shelves and partitions) including required beading and necessary fittinge and fixtures as per manufacturers instruction complete all as specified and directed by Engr-in-charge. (Make: Rajshri or equivalent as approved by GE.) |
| 96 | S&F in repair 32mm brass chromium plated waste coupling for wash hand basin complete all as specified and directed. |
| 97 | S&F in repair PVC (SWR)110mm borepipes, single socketed in any length with rubber ring joints with adhesive solventfixed to wall complete all as specified and directed. |
| 98 | S&F in repairPVC (SWR) 75mm borepipes, single socketed in any length with rubber ring joints with adhesive solventfixed to wall complete all as specified and directed. |
| 99 | S&F in PVC (SWR) 50 mm borepipes, single socketed in any length with rubber ring joints with adhesive solvent fixed to wall as in urinal/ WHB waste water line and similar works etc complete all as specified and directed. |
| 100 | S&F in repair 75 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 101 | S&F in repair 50 mm bore PVC (SWR) bends any radius complete all as specified as directed. |
| 102 | S&F in repair 110mm PVC (SWR) branch piece, single (single Y) equal or unequal etc complete all as specified and directed. |
| 103 | S&F in repair 75 mm PVC (SWR) branch piece, single (single Y) equal or unequal etc complete all as specified and directed. |
| 104 | S&F in repair 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door etc complete all as specified and directed. |
| 105 | S&F in repair 110mm PVC (SWR) "P’ or "S" trap and similar etc complete all as specified and directed. |
| 106 | S&F in repair 100mm cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in floors/ walls and similar works complete all as specified and directed. |
| 107 | S&F in repair 75mm cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in floors/ walls and similar works complete all as specified and directed. |
| 108 | S&F in repair 100mm CI Bends of (any radius),diminishing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 109 | S&F in repair 75mm CI Bends of (any radius),diminishing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 110 | S&F in repair cast Iron "P" trap or "S" trap of size 100mm complete all as specified and directed. |
| 111 | M&L for cast iron floor trap 100 mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. |
| 112 | M&L for cast iron nahani trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. |
| 113 | Taking up or down steel tubingpipe and connections 20mm bore complete all as specified and directed. |
| 114 | S&F 20 mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified and directed. |
| 115 | S&F in repair 15mm Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 116 | S&F in repair 20mm Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 117 | M&L for preparation ofwashing, rubbing down and stopping of distempered and painted surfaces of wall and applying two coats of washable oil bound distemper complete all as specified and directed. |
| 118 | M&L for preparation of plastered or unplastered ofold decorated surfaces of ceiling etc and applying two coats of white washing complete all as specified and directed. |
| 119 | S & F Work station single seater 1625(L) X 1220 (W) X 1200(H) (customised) with three side transparent glass and movable pedastal with following specification:- (a) Overall size of work station is 1625 mm(L) x1200 mm(W) x1200 mm (H) . Work station shall be made out of 25 mm thick plywood BWR ISI Marked covered with 1 mm thick plastic laminated sunmica sheet of approved colour, quality and shade on both sides with suitable machine hot pressed 2mm thick PVC beading including three sides transparent glass as specified by Engr -In - Charge. (b) Movable Cabinet , H type CPU stand and Key Board Tray shall be made of 18 mm thick plywood BWR ISI Marked covered with 1 mm thick plastic laminated sunmica sheet of approved colour, quality and shade on both sides with suitable machine hot pressed 2mm thick PVC beading including Drawer and keyboard tray of cabinet shall be running on best quality telescopic channel (Make : Link /Godrej/ Hettich or equivalent as approved by GE) of approved quality as per standard workmanship. (c) D type stainless steel Handle shall be as approved by Engr-in-charge and Lock for door/drawer shall be of (or equivalent as approved by GE) of approved quality as per standard workmanship. (d) Rest all as per directed by EIC/GE. |
| 120 | Taking down carefully copper/ aluminum point wiring (Light, fan, socket, power and Bell) including fixture and fittings such as switches, sockets, ceiling roses, lamp, holder , regulators, socketslight fittings etc , removing material to store for keeping in safe custody or for taking credit , and making good disturbed surface of walls, floors, etc. complete all as specified and directed by Eng-In-Charge. |
| 121 | M&L for point wiringfor modular accessories with modular metal flush box and cover plate with frame of suitable size complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLScable 1100 volts grade drawn throughmetallic rigid / PVC heavy duty concealed conduit/ casing capping/open coduit with 1.5 sqmm, single core, PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade as earth continuity wire terminated in new modular sunken boxes and modular metal flush box as required size at site incl all connected accessories , box made from not less than 1.6mm GI sheet factory made complete all as specified and directed by Eng-In-Charge for the following. One light/bell/fan pointcontrolled by one switch complete |
| 122 | All as per item No 121 here in before but one 3 pin socket out let 5 Amps on the independent board. |
| 123 | All as per item No 121 here in before but one 3 Pin socket out let 5 Amps on the same board. |
| 124 | All as per item No 121 here in before but with cable of size 2.5 Sq mm PVC insulated on independent boardfor power plug 15 Amps complete all as specified and directed by Eng-In-Charge. |
| 125 | S&F in replacement Modular switch one way 6A,1 Module, complete all as specified and directed by Eng-In-Charge. |
| 126 | S&F in replacement Modular switch one way 16A,1 Module, complete all as specified and directed by Eng-In-Charge. |
| 127 | S&F in replacement Modular bell push 6A,1 Module, complete all as specified and directed by Eng-In-Charge. |
| 128 | S&F in replacement Modular socket 6/10A-2/3 pin combined 2 Module complete all as specified and directed by Eng-In-Charge. |
| 129 | S&F in replacement Modular socket 16/15A-2/3 pin combined2 Module complete all as specified and directed by Eng-In-Charge. |
| 130 | Supply & Fixin replacement bed switch 5 Amps, single pole complete all as specified and directed by Eng-In-Charge. |
| 131 | Supply & fix in replacement Ding dong bell AC 230V complete all as specified and directed by Eng-In-Charge. |
| 132 | Supply & fixin replacement ceiling rose 3 terminal/ poly carbonate, isolated body complete all as specified and directed by Eng-In-Charge. |
| 133 | Supply & fix in replacement Lamp holder/angle holder, insulated body with back plate for battern fitting complete all as specified and directed by Eng-In-Charge. |
| 134 | Supply & fix in replacement 3 pin plug top 6/16 A, 240 Vcomplete all as specified and directed by Eng-In-Charge. |
| 135 | S&F in replacement white cover plate with frame, 2/3 module complete all as specified and directed by Eng-In-Charge. |
| 136 | S&F in replacement white cover plate with frame, 4 module complete all as specified and directed by Eng-In-Charge. |
| 137 | S & Fin replacementwhite cover plate with frame, 6 module complete all as specified and directed by Eng-In-Charge. |
| 138 | S & Fin replacement white cover plate with frame, 8 module complete all as specified and directed by Eng-In-Charge. |
| 139 | S & Fin replacement white cover plate with frame, 12 module complete all as specified and directed by Eng-In-Charge. |
| 140 | M&L in replacementof sub main wiring complete with PVC insulated cable two run of04 Sq mm (FRLS) 1100 volts grade with multi stranded copper conductor for drawn through and including PVC casing -cappingwith accessories incl4 Sq mm unsheathed multi stranded copper conductor as on earth wire complete all as specified and directed by Eng-In-Charge. Note :- Two runs of 4 sqmm cable with one run of earth continuity cable including PVC casing -capping and its accessories will be measured and paid as one unit |
| 141 | S&Fin replacement Casing capping patti /conduit pipe of any size up to 50 mm dia including all its tee, bends etc ofwhite/ivory/gray colour complete all as specified and directed by Eng-In-Charge. |
| 142 | Supply and fixingin replacement sheet metal enclosure, single phase, double door DB, flush to wall mounting for MCB fitted with 200 Amp ratedbus barsand neutral links ( without MCB"s) 12 ways SPN complete all asdirected by Engineer-in-Charge. |
| 143 | Taking down old unserviceable sheet metal enclosure and Supply and fixing factory made single pole and neutral sheet metal enclosure with atwo Pin Socket plug and socket with one single pole MCB 240Volts, 20 Amps, capacity complete all as specified and directed by Engineer-in-Charge. |
| 144 | Supply and fixingin replacement MCB, SPN 240 volts, 40 to 63 Amps capacity complete all as specified anddirected by Engineer-in-Charge. |
| 145 | Supply and fixing in replacement MCB, SP 240 volts capacity 5 - 32 Amps current rating, 10KA breaking capacity complete all as specified anddirected by Engineer-in-Charge. |
| 146 | Supply and fixing in replacement for LED tube light fittings 1x20 Watts, 230 volts surface and wall mounted LED type,extruded thermoplastic body with polycarbonate diffuser & integrated electronic driver complete with all accessories internally pre wired and including connection up with twin core twisted flexible copper conductior cable of size 1.5 sqmm and flexible pipe of white colourfrom ceiling rose to light complete all as specified and directed by Eng-In-Charge. |
| 147 | Supply and fixing in replacement for LED light fittings 1x10 Watts, single side connection 230 volts surface and wall mounted LED type complete with all accessories internally pre wired and including connection up with twin core twisted flexible copper conductior cable of size 1.5 sqmm and flexible pipe of white colourfrom ceiling rose to light complete all as specified and directed by Eng-In-Charge. |
| 148 | Supply and fixing for Pluto Panel surface/recess mounted2"x2", 36/40 watt cool white or warm white in colour LED flat panel for surface mounting which provides soft-light and glare free symmetrical illumination including connection up with twin core twisted flexible copper conductior cable with suitable size complete all as specified and directed by Eng-In-Charge. |
| 149 | Supply and fixin replacement recess mounted adjustable LED down lights made of extended aluminium housing of capacity 15 wattcomplete all as specified and directed by Eng-In-Charge. |
| 150 | Supply and fix in replacement surface/recess mounted cabinet LED3W/5 watt deep spot light complete with all internal wiring all as specified and directed by Engr in Charge. |
| 151 | Supply and fixing for LED Decorative wall light, gold finish fixture with white glass diffuser suitable for 7.5/10/20 watt LED fillament lamp E27 base complete with all accessories internally pre wired and including connection up with twin core twisted flexible copper conductior cable of size 1.5 sqmm complete all as specified and directed by Eng-In-Charge. |
| 152 | Supply and fix Decorative wall light 40 w bedside chrome double arm swivel reading light (silver & white) approximate dimensions are 11.5" wide x 11" high x 11.5 " to 19.5" extension Brass housing and high power LED of item Part No Swivel2Arm-chrome-Rect-WL1 or equivalent as approved by GE complete all as specified and directed by Eng-In-Charge. |
| 153 | Supply & fix cylindrical shape frost candle light lamp 15 watt yellow/warm white colour LED bulb minimum 900 lumens, suitable for 180 V to 280 volt complete all as specified and directed by Eng-In-Charge. |
| 154 | S&F in replacement Surface mounted round spot/focus light/mirror light CRCA body powder coated in white of capacity 12/15 watt complete all as specified and directed by Eng-In-Charge. |
| 155 | S&F in replacement LED flood light, colour of CW/WW /RGB of capacity 100 watt, 240 volt, 50 HZ complete all as specified and directed by Eng-In-Charge. |
| 156 | S&Fin replacement LED flood light, colour of CW/WW /RGBof capacity 30 watt, 240 volt, 50 HZ complete all as specified and directed by Eng-In-Charge. |
| 157 | S&F in replacement LED light on rope decorative type water proof, 40 feet length , colour blue, white, yellow or multicolourwith adaptor , suitable for 180 volt to 280 volt complete all as specified and directed by Eng-In-Charge. |
| 158 | Supply & fix in replacement bulb retrofit type 7 watt LED bulb B22/E27 holder minimum lumens 600, suitable for 180 volt o 280 volt complete all as specified and directed by Eng-In-Charge. |
| 159 | Supply & fix in replacement bulb retrofit type 15 watt LED bulb B22/E27 holder minimum lumens 900, suitable for 180 volt o 280 volt complete all as specified and directed by Eng-In-Charge. |
| 160 | Supply and fix LED security light 25 watt, 240 voltIP 65 protection, weather proof, with all other accessories complete all as specified and directed by Eng-In-Charge. |
| 161 | Taking down and Re-winding in repair/replacement of ceiling/exhaust /wallfan motor of any type and size including removing old burnt wire copper wire as per existing gauge & insulated paper, varnishing also including replacement of bearing, bush and capacitor with cleaning/greasing complete all as specified and directed by Eng-In-Charge. |
| 162 | Supply and fix in replacement exhaust fan 250/300 mm sweep silent type in PVC Body as required at site. complete all as specified and directed by Eng-In-Charge. |
| 163 | Supply and fix in replacement 1.5 Sqmm 3 core PVC insulated, unsheathed multistranded copper conductor flexible cable1100 volts grade complete all as specified and directed by Engr in Charge. |
| 164 | Supply and fix in replacement2.5 Sqmm 3 core PVC insulated, unsheathed multistranded copper conductor flexible cable 1100 volts grade complete all as specified and directed by Engr in Charge. |
| 165 | Supply and fix in repair/replacement Water heater heating element for 25 Ltrs capacity 1.5 KW complete all as specified and directed by Eng-In-Charge. |
| 166 | Supply and fix in repair/replacement Thermostat of water heater for 25/50 Ltrs capacity AC 230V complete all as specified and directed by Eng-In-Charge. |
| 167 | Supply and fix in replacement Outer Body including top and bottom coverof water heater for 25/50 Ltrs capacity AC 230V complete all as specified and directed by Eng-In-Charge. |
| 168 | Supply and fix in replacement Inner copper tank for geyser cap 25 ltr ofguage -22 complete all as specified and directed by Eng-In-Charge. |
| 169 | Supply and fix in repair/replacement flexible hot water pipe steel cover wireof length not less than 1 metre with washer for hot and cold water for geyser connection complete all as specified and directed by Eng-In-Charge. |
| 170 | Supply and fix in replacement acoustic insulation wool of water heater for 25/50 Ltrs capacity AC 230V complete all as specified and directed by Eng-In-Charge. |
| 171 | Suppy & fixing and testing for water pumping of capacity 40 watt complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
