New Delhi Municipal Council-NDMC has published Repairing Of Cooling Coil For Ahu Near Gate No-2 And Other Miscellaneous Works For Ventilation Fan At Palika Bazaar Under Bm-I(E) Division. Submission Date for this Tender is 14-02-2024. AMC of Air Condition Tenders in New Delhi Delhi. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Fabrication, supply, installation, testing and commissioning of louvers made of flat strip of stainless steel of grade SS304 of following dimension for ventilation fans of dia 1250mm located at the terrace of Palika bazaar.The louver shall be made up with extruded built up standard flat plate sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners / L key bolts of required dia and size, including necessary filling up the gaps at junctions. Stainless steel sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including stainless steel screws, all complete as per approved drawings and the directions of Engineer-in-charge including deduction of dismantled material prices which are to be received from this work by the agency. SS plates should be of minimum a) Outerframe 40mm x 40mmx 4mm b) Louver member 50mm x3mm |
2 | Fabricating, supplying, installation ,testing and commissioning of ventilation doors made of flat strip stainless steel of grade SS304 of following dimension size 1200mm x1050mm located at the terrace of Palika bazaar .The door shall be made up with extruded built up standard flat plate sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners/L key bolts of required dia and size, including necessary filling up the gaps at junctions. Stainless steel sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including stainless steel screws, all complete as per approved drawings and the directions of Engineer-in-charge including deduction of dismantled material prices which are to be received from this work by the agency. SS plates should be of minimum a) Outerframe 40mmx40mmx4mm b) Door 32mmx32mmx3mm |
3 | Supplying, Installation, testing and commissioning of factory built cooling coil section with aluminium finned copper tubes, with Copper header, dia of tube 1/2", Al. fin 10-12 per inch, and thickness of tube should not be less then 0.41mm and casing of coil should be GI i/c dismantling of old coil removing of panel welding of flanges of new coil complete and buyback the old dismantle cooling coil as per specification & capacity. CHW Cooling Coil , FL – 2100 mm x FH - 1850 mm / 4RD. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail