Delhi Jal Board-DJB has published Improvement By Renovation Of Foundation Of Back Wash Pump Set No. 1 2 3 And 4 With Allied Work Of Suction And Delivery Line At Filter House Of 3Rd 40Mgd Plant Wazirabad Water Works.. Submission Date for this Tender is 12-02-2024. Foundation Work Tenders in wazirabad Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Disconnecting of all electrical connections and decoupling the motor from the pump and pump from suction and delivery line by using gas cutter set and manual heavy labour etc. As required. |
| 2 | Dismantling of 350mm dia. damaged water line &NRV of Set No. 2,3 & 4 with help of gas cutter and manual heavy labour with tool and tackles. |
| 3 | Making of MS blank flange 350mm dia. of 16mm thick at suction side and delivery side as required. |
| 4 | Dismantling the pump set from the base frame by cutting and removing of all the rusted MS nut bolts by gas cutter and electric welding set and manual heavy labour as per site requirement and lifting of pump and motor on ground with the help of crane and manual heavy labour etc. as required. |
| 5 | Removing of worn out MS base frame from RCC by cutting foundation bolts with the help of gas cutter and electric welding set and lifting it out by heavy manual labour to ground level and shifting it to safer side as per instruction of engineer in charge. |
| 6 | Breaking of RCC foundation by pneumatic power chisel and electric compressor machine includes removing the broken material from pump house and disposing the same as suitable place as per instruction of engineer in charge. |
| 7 | Making of RCC foundation by 1:2:4 concrete including providing and fixing of 400 MMX20MM 6 nos. Foundation bolts etc as required. |
| 8 | Providing of heavy duty MS base frame of Pumps set made out of heavy duty MS channel and MS plate of suitable size as per existing base frame. |
| 9 | Supply of 350mm dia MS black pipe 8mm thick. Make: Jindal/ TATA |
| 10 | Supply of swing type NRV of 350mm flanged end as per IS 5312 body cover – CI IS 210, Gr FG 260 door – CI IS : 210, Gr FG 260 Body ring – Bronze , IS : 318 Gr LTB2 door face- Natural Rubber Hinge pin SS ASTM A276 type 410 fastener CS IS: 1367, CL-4.6/4.0 gasket- Natural Rubber Flange drilling- IS 1538 Table 4 & 6. Make : Kirloskar /IVC |
| 11 | Supply of Neoprene Rubber Packing. Make: Jyoti/National |
| 12 | Supply of MS nut bolts washers etc. |
| 13 | Fixing of MS base frame on the RCC foundation the job include proper levelling and alignment. |
| 14 | Providing and Painting of the suction/delivery lines CI valves NRV MS frame and CI fitting with good quality enamel paint after two coats of Red oxide primer etc as required. |
| 15 | Installation of the pump and Motor on the base frame including couple the pump and motor also fixing of new NRV of 350m dia. at set No. 2,3 & 4 with allied woks & jointing the pump with suction/delivery line with proper alignment the job also includes the laying of cable, making connection the motor from starter /panel etc including watch and ward, taking all safety precaution arrangement all tools and tackles the work includes testing and commissioning all the E&M equipment on turnkey basis including pump and motorat NO load and Full load. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
