Tender For 8 Apd Items, Hazira-Gujarat

Tender For 8 Apd Items 1 33391642 00030 00010 300707301 GUIDE CURVED PLATE R1,DRG:10072795 Technical Details Name : Patel, Priyank - AM/NS India - CSP Mill Contact : 7486035470 Email : Priyank.patel2@amns.in 2 NO APD NOMENCLATURE : GUIDE CURVED PLATE R1 , DRAWING NUMBER : 10072795 ADDITIONAL INFORMATION : GUIDE CURVED PLATE FOR WRAPPER ROLL TYPE-R1 Item Details : Vendor has to submited following reports. - During the ordering stage, the vendor must submit a QAP. - The vendor is required to submit a drawing for approval. - Report on Dimensional Inspection - A certificate of material testing (Chemical <(>&<)> mechanical both) - Non-destructive testing (NDT) report (UT, DP, MPT, Radiography) (whichever is applicable as per Drawing) - Graph and report on heat treatment (If applicable as per drawing) - Report on the hardness test (If applicable as per drawing) Item Note : 2 33391642 00040 00020 300707303 GUIDE CURVED PLATE R3,DRG:10072783 Technical Details Name : Patel, Priyank - AM/NS India - CSP Mill Contact : 7486035470 Email : Priyank.patel2@amns.in 1 NO APD NOMENCLATURE : GUIDE CURVED PLATE R3 , DRAWING NUMBER : 10072783 ADDITIONAL INFORMATION : GUIDE CURVED PLATE FOR WRAPPER ROLL TYPE-R3 Item Details : Vendor has to submited following reports. - During the ordering stage, the vendor must submit a QAP. - The vendor is required to submit a drawing for approval. - Report on Dimensional Inspection - A certificate of material testing (Chemical <(>&<)> mechanical both) - Non-destructive testing (NDT) report (UT, DP, MPT, Radiography) (whichever is applicable as per Drawing) - Graph and report on heat treatment (If applicable as per drawing) - Report on the hardness test (If applicable as per drawing) Item Note : 3 33391642 00050 00030 300707306 GUIDE CURVED PLATE R2,DRG:10072790 Technical Details Name : Patel, Priyank - AM/NS India - CSP Mill Contact : 7486035470 Email : Priyank.patel2@amns.in 2 NO APD NOMENCLATURE : GUIDE CURVED PLATE R2 , DRAWING NUMBER : 10072790 ADDITIONAL INFORMATION : FOR WRAPPER ROLL TYPE-R2 Item Details : Vendor has to submited following reports. - During the ordering stage, the vendor must submit a QAP. - The vendor is required to submit a drawing for approval. - Report on Dimensional Inspection - A certificate of material testing (Chemical <(>&<)> mechanical both) - Non-destructive testing (NDT) report (UT, DP, MPT, Radiography) (whichever is applicable as per Drawing) - Graph and report on heat treatment (If applicable as per drawing) - Report on the hardness test (If applicable as per drawing) Item Note : 4 33397103 00030 00040 300516551 LINK,DRG:10075505 Technical Details Name : Jenish Patel Contact : Email : jenish.Navinbhai@amns.in 24 NO APD NOMENCLATURE : LINK , DRAWING NUMBER : 10075505 Item Details : VENDOR HAS TO SUBMIT FOLLOWING - PERFORMANCE TEST CERTIFICATE - PERFORMANCE GUARANTEE Item Note : 5 33397103 00150 00050 300427912 REAR WEARING PLATE,DRG:10075520 Technical Details Name : Jenish Patel Contact : Email : jenish.Navinbhai@amns.in 16 NO APD NOMENCLATURE : REAR WEARING PLATE , DRAWING NUMBER : 10075520 Item Details : VENDOR HAS TO SUBMIT FOLLOWING - PERFORMANCE TEST CERTIFICATE - PERFORMANCE GUARANTEE Item Note : 6 33399194 00150 00060 300883396 SLEEVE,SHAFT,DRG:10065560 Technical Details Name : Patel, Priyank - AM/NS India - CSP Mill Contact : 7486035470 Email : Priyank.patel2@amns.in 12 NO SLEEVE,SHAFT ADDITIONAL INFORMATION:SHRINKING SLEEVE , DRAWING DRG NO:10065560 DRAWING REV NO:00 Item Details : The vendor has to submit the following reports: 1.Dimensional Inspection report 2.Material test certificate (Chemical <(>&<)> mechanical both) 3.Material code <(>&<)> PO no. must be mentioned on test report. 4.Vendor should provide all test <(>&<)> dimention reports as per mentioned in dwg. 5.vendor has to follow all machining tolerance <(>&<)> surface finish as per mentioned in dwg. Item Note : 7 33399194 00330 00070 300818785 PLATE,DRG:10090316 Technical Details Name : Patel, Priyank - AM/NS India - CSP Mill Contact : 7486035470 Email : Priyank.patel2@amns.in 11 NO APD NOMENCLATURE : PLATE , DRAWING NUMBER : 10090316 Item Details : The vendor has to submit the following reports: 1.Dimensional Inspection report 2.Material test certificate (Chemical <(>&<)> mechanical both) 3.Material code <(>&<)> PO no. must be mentioned on test report. 4.Vendor should provide all test <(>&<)> dimention reports as per mentioned in dwg. 5.vendor has to follow all machining tolerance <(>&<)> surface finish as per mentioned in dwg. Item Note : 8 33399194 00400 00080 300875432 ROLLER,SUPPORT,DRG:0792381 Technical Details Name : Patel, Priyank - AM/NS India - CSP Mill Contact : 7486035470 Email : Priyank.patel2@amns.in 6 NO ROLLER,SUPPORT ADDITIONAL INFORMATION:FOR CTD CHASSIS , DRAWING DRG NO:0792381 Item Details : The vendor has to submit the following reports: 1.Dimensional Inspection report 2.Material test certificate (Chemical <(>&<)> mechanical both) 3.Material code <(>&<)> PO no. must be mentioned on test report. 4.Vendor should provide all test <(>&<)> dimention reports as per mentioned in dwg. 5.vendor has to follow all machining tolerance <(>&<)> surface finish as per mentioned in dwg.

Refer document

Refer document

Refer document