Public Health Engineering Department-PHED has published Supply, Delivery & Installation Of Submersible Pumping Machinery And Others Electro-Mechanical Accessories At Kuila Primary Health Center At Binpur-Ii Block Of Jhargram District Under Jhargram Mechanical Division P.H.E Dte.. Submission Date for this Tender is 12-02-2024. Pumping Machiney Tenders in jhargram West Bengal. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Supply and Delivery of clear water vertical wet type Submersible pumping machinery directly coupled with suitable wet winding type submersible motor having following specifications:Discharge -- 1.8 m³/hr Total Head ---- 78mtrOutlet Size---- 32mm dia Shaft ------- SS 410 Impeller -Bronze/CS/SS/NORYLMotor : Single phase, 50Hz ± 5 %; Standard Voltage:230 volt ± 10 %, AC wet winding type Submercible MotorMode of Starting: DOL Pump shall be of 3 star BEE rating as per current schedule of the Bureau of Energy Efficiency (Revision 04, Schedule 7 w.e.f. 01.02.2020) (Make --As per approved vendor list of PHED vide no. 26004/79/F/2018 dt.:- 29-12-2023) (As per site requirement). |
2 | Supply and Delivery of following materials: ? 50 mm uPVC column pipe with bothside threaded and one side threaded .3 mtr long |
3 | 1.5 mtr long |
4 | 50 mm dia top & bottom Adoptor(CI) |
5 | 1.1 KV grade, 2.5 sq.mm. 3 core PVC insulated & sheathed copperflat submersible cable.Conforming to IS: 694(Part-I)with latest amendments. (Make --As per approved vendor list of PHED vide no. 26004/79/F/2018 dt.:- 29-12-2023) (As per site requirement). |
6 | 50mm dia heavy type suitable length CI/MS Black pipes (fordelivery header,backwash line for pump under sl no-1, along with necessary bends, specials, fittings , viz flanges, bolts, nuts, gaskets, concentric enlarger , MS dismenteling joint, for connecting main pipe line etc. including providing MS/Bricks/PCC support for laying of pipes, valves as required to make the installation complete as per direction of EIC.This includes the cost of supply,delivery of common header & short piece of required length to connect the delivery pipe line. |
7 | Anti-snapping safety device for above pump by supplying 1" dia. Nylone rope of required length (double) including supply of all necessary materials as required. |
8 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match withGI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings asrequired,jointing materials and two coats of painting with approved paintin any position above ground. (Payment will be made on the centre linemeasurements of total pipe line including all specials. No separatepayment will be made for accesories, specials. Payment for painting willbe made seperately) (a) For Exposed Work 32 mm dia PVC Pipes |
9 | M.S fabricated split type suitable tube well cover as per tube well housingwith necessery clamping arrangementincluding provision of holes for column pipe ,air pipe and cable entry etc. all complete as per direction of E.I.C |
10 | M.S suspention clamp with necessery nuts,bolts & washeretcsuitablefor 50 mm dia pipe( Size 300 mm X 50 mm X 8 mm each) |
11 | 50 mm dia, P.N. 1.0, CIDF Non return valve conforming to IS: 5312, part-I. (Make --As per approved vendor list of PHED vide no. 26004/79/F/2018 dt.:- 29-12-2023) |
12 | 50 mm dia, P.N. 1.0, CIDF sluice valve, non-rising valve conforming to IS: 14846 (Make --As per approved vendor list of PHED vide no. 26004/79/F/2018 dt.:- 29-12-2023) (for Back wash and delivery line) |
13 | Supplyand delivery of DOL (Direct on line)Motor Control Pannel stater boardconforming to IS3947 and IEC947suitable for the supplied submersible pump motor including Start - Stop push botton, Ammeter,Voltmeter, Thermal overload relay,2 pole magnetic conductor with inbuilt PLC ,under voltag protection , indicating lamps, Capacitor etc. as necessary all complete as per direction of EIC. 230V(±10%)AC, single phasewiring with 1/1.5 sq mm PVC insulated copper wire ,50HZ(±5%),1.5 HP(relay range 9-14Amp) with water level control. (Make --As per approved vendor list of PHED vide no. 26004/79/F/2018 dt.:- 29-12-2023) |
14 | 63 Amp, 10 kA, 240/415V, 50 Hz Double pole MCB Isolator conforming to IS / IEC: 60947-3, "C" characteristics with enclosure. (Make --As per approved vendor list of PHED vide no. 26004/79/F/2018 dt.:- 29-12-2023) |
15 | 1.1 KV Grade 415 V, 2 core 10 sq.mm. PVC sheathed XLPE insulated Al. armoured cable conforming to IS:7098 (PART-1) 2011 with latest amendmends as applicable. (Make --As per approved vendor list of PHED vide no. 26004/79/F/2018 dt.:- 29-12-2023) ( As per site requirement) |
16 | Hard wooden board (450mm X 304.8 mmx 25mm thick) |
17 | Laying of cable (as in item no. 15) on wall/surface incl. S & F of MS saddles with earthing attachment in 10 SWG GI (Hot Dip) wire, making holes etc. as necy. mending good damages and painting all complete as per direction of E.I.C. |
18 | Supplying and fixing of compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry ofcable (as in item no. 15) all complete as per direction of E.I.C. |
19 | Finishing the end of cable (as in item no. 15) by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materialsall complete as per direction of E.I.C. |
20 | Earthing with 50 mm ISI mark medium diameter G.I. pipe 3.64 mm thick x 3Mtr. (10ft.) long and 1 x 4 SWG G.I. wire (4Mtr.long) 13 mm diameter x 80mm (3inch) long G.I. Bolts, double nuts, washer including S & F of 15mm diameter G.I. pipe protection (1 Mtr. Long) to be filled with bitumen partly below ground level to an average depth of 3.65Mtr.(12ft.) below the ground level and restoring the surface duly rammed.i) For soft soil by ISI Medium GI pipe. |
21 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm diaholes on the GI pipe. |
22 | Extra for treatment of soil by salt and charcoal coke for pipe electrode. |
23 | Making suitable size pump foundation base ( Size: 1.00 mtr. x 1.00 mtr. x 1.5 mtr.) with supplying cement, sand, stone chips etc. in the portion of (4:2:1) including plastering, neat cement finishing including painting etc. all Complete as per direction of EIC. (i) Tubewell outside health center |
24 | Making required nos. of brick pillar 0.25 mtr. X 0.25 mtr. For supporting of valves, actuator and pipes with 12 mm thick plaster and net cement finish including painting all complete as per direction of E.I.C |
25 | Installation ,testing & commissioning of above supplied (item no 1-7 & 9-16)pumping machinery along with column pipe,valves and other mechanical accessoriesby hiring necessary derrick arrangement all complete .This includes the cost of fixing the starter at suitable positionin health center and interconnection with starter isolator and pumping machinery by laying submersible cable on wall /underground trenches all complete as per direction of EIC. at site as per direction of EIC. |
26 | Add GST @ 18 % |
27 | Add Cess @ 1 % |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail