Tender For Construction Of Community Toilet (8 Seat) At Ward No 15, Pothanaikanur In Madathukuam Town Panchayat
Tender Value
13 Lakhs
Estimated cost
Bid Submission
14 Feb 2024
0 days left
EMD
26000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
madathukulam → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Community Toilet ( 8 Seat ) At Ward No 15, Pothanaikanur In Madathukuam Town Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Earthworkexcavationinallclassofsoilsexcepthardrocksrequiringblastingsuchashardstiftclaycottonhardearthshalesmurramsgravelstoneyearthandearthmixedwithsmallsize withinitialleadandliftincludingallincidentialchargessuchasremovingboulderssharing,strutting,wateringbailingoutwateritnecessaryincludingalllabourchargesetc.,Completeforfoundation. Toilet |
| 2 | Plain Cement Concrete of mix 1 : 4 : 8 (One Cement four sand eight aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. |
| 3 | Supplying ,errecting and CenteringforSideandSoffiotsincludingnecessarysupports for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90x60cm & 10 gauge stiffened, welded with steel angle of size 25x25x3mm for boarding laid over silver oak joists (Country wood) of size 10x6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 -13cm dia.spaced @ 75cm c/c etc., complete complying with standard specifications for Side wall etc., Complete.Column mat and Grade Beam |
| 4 | Column |
| 5 | For Roof |
| 6 | Supplying and Fabrication of Steel and placing in position MS / Ribbed tor steel grills for RCC works as per design given including cost of steel and GI binding wire in Floors etc., Complete complying with standard specification in force per Kilogram. |
| 7 | Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part M-sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.Complete with std.Specifications.(Using Vibrator)TNDSS NO: 30 V, VI (S3), VII-3. |
| 8 | A) Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size9 ” x 4 3/8 “x 2 3/4 ”from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.(For 10 M3) |
| 9 | Supply and Filling of Gravel from an approved Quarry including cost and conveyance of red gravel and labour charges for loading, unloading, filling, leveling, consolidate by water etc., complete as per standard specification. |
| 10 | Special ceiling Plastering in Cement Mortor 1:3 Mix (one Cement, Three M-sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications |
| 11 | PlasteringinC.M. 1 : 5 (one cement, five sand) to12 mmthickincludingallcostandconveyanceofallmaterials tositeincludingcostofcementwhichwillbepurcharedlocallybythecontractor and conveyanceofthesametotheactualworksiteandcostformworkincludingwatering curingandallleadsofgoodpotablewaterandallother. |
| 12 | Plastering in Cement Mortar 1:3 Mix (one Cement, Three M-sand ) 20mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications |
| 13 | Providing UPVC (Un-Plasticized Polyvinyl Chloride)Door: Providing and fixing casement doors fabricatedfrom un-plasticized polyvinyl chloride (uPVC) ctions.Profiles: e profiles should be three chamber systemwhich provides high insulation properties with outerframe 60mm x 55mm with an outer wall hicknessof2.4mm. The window unit should be designed with allcorner joints mitred and fusion welded. Windowsshould be steel reinforced with 25 x 24 x 25mm teelreinforcement with a thickness of 1mm to havedimensional stability. The sash should be of 60 x102mm. The mullion should be of 60 x 74mm. Theprofiles shouldhave co-extruded seals.Hardware: All the hardware like friction stays, handlesshould be screwed with self tapping screws. Thehandles, locks should be designed so that they cannotbe released from outside.Glazing: The window system should be glazed with5mm plain float glass / 6mm bison lamInstallation: The profiles should be cut to length andwelded 45 degrees. The window should be designedsuch that the water drainage does not pass throughthe reinforcement chamber. The window systemshould be fixed directly to the plastered brick wallusing self expanding nylon plug and driving mselectroplated screws into plug. |
| 14 | Supplying and fixing of M.S.Grill Gate of approved design using necessary mild steel flats for inner and outer members which should be fixed to Gate frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications. |
| 15 | Supplying and fixing over the floors best quality of Scratch Ceramic Tiles of 30 c.m x 30c.m x 6mm sizeof approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc.Complete. |
| 16 | Dadooing the walls with glazed tiles of 30 c.m x 20 c.m 6mm size laid in cement mortor 1:2 mix 10mm thick and pointing with 0.40 kg white cement per m2 etc., |
| 17 | Supply and fixing in position 22\" Indian type water closet with foot reset includes \"P\" (or) \"S\" trap including cost and conveyance of all materials to site and all labour charges etc., to complete as per std.,specifications. |
| 18 | Supplying and fixing in position best Indian make white glazed earthenware WASH HAND BASIN of 560x406mm with a a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specifications. |
| 19 | Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications |
| 20 | Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality etc., complete |
| 21 | Wiring with 2x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade insuitable heavy gauge MSconduit pipe on wall and ceiling with MS accessories with MS switch Box and 5A FT switch with painting of suitable colour continuous earth wire connection of 14SWG TC wire for light point / fan point (for electronic regulator) SD-19 |
| 22 | Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL. SD-83 |
| 23 | Supply and Run of 4 x 4 sq.mm(56/0.3) PVC insulated Sc unsheathed Cu.Conductor of 1100V grade in 25mm dia G.I pipe (\"B\"class) suitable bend at both ends with necessary angle iron up right and end supports for mains.SD-72 |
| 24 | Supply and run of 4 x 6 sq.mm.(84Nos/0.3mm.Dia) PVC insulated single core unsheathed copper conductor cable of 1100 V on 7/20 G.I. bearer wire for service connection mains.SD-68 |
| 25 | Supply and fixing of 4\"40W twin box type fluorescent fittting complete with copper choke and condensor with conduit pipe suspension from ceiling with PVC unsheathed copper leads from terminals to the fitting with fluorescent Tubes.SD-91 |
| 26 | Supply and fixng of TNEB meter board suitable for 3phase 63A service connection made up of suitable angle iron frame work of size 2 feetx1-1/2 feet using angle iron of size1-1/2\"x1-1/2\"x1/4\" rigidly fixed on wall covered with hylem sheet of size 2feet x 1/2feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos.63A fuse units (500V),1No.neutral link,copper earth flat of size1\"x1/4\"with inter connection of EB meter to fuse units by7/16 PVC insulated copper wire with earth connection complete SD-129 |
| 27 | Supply ofPVC PIPE6 Kg/cm2 including all cost andconveyance. |
| 28 | Conveying of PVC right pipe to trench with in a lead of 200m lowering in to a trench carefully laying to proper grad and alignment jointing with PVC couplers with cement paste and testing to the requited pressure including conveyance of water upto 1.00km |
| 29 | Refilling with excavated earth other than sand complying with standard specification. |
| 30 | Supply and fixing of 1000 ltr Capacity HDPE Tank including cost of all materials to site and all labour charges |
| 31 | Supplying and fixing in position indian make bewelled edge mirror of approved quality and brand of size 600 X 450mm wth necessary plastic back, PVC frame with bottom stand of approved colour with brass screws,rawal plugs etc., complete complying with standard specifications. |
| 32 | Supplying and fixingbest approved quality Brass C.P anodised Towel rail 600mm. long and 20mm Diameter with brackets of same material including cost of Teak-Wood plugs and C.P.Screws etc., complete complying with standard specifications |
| 33 | Supplying and fixing best approved quality C.P.Soap Tray of size 150mm X 100mm including cost of Teak Woodplugs, brass screws complete complying with standardspecifications. |
AI Tender Summary
Tender Timeline
Feb 05, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 14, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 15, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender