Bharat Electronics Limited-BEL has published Repair And Maintenance Works In Township At Bel Panchkula => Limited. Submission Date for this Tender is 14-02-2024. Electrification Work Tenders in panchkula Haryana. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 13-Feb-2024 | Corrigendum-I | Date | 14-02-2024 |
Sl. No. | Item Description |
1 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 25mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
2 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:All kinds of soil |
3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size). |
4 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
6 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
7 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
8 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting,nloading to approved municipal dumping ground or as approved by Engineer-in-charge, upto 5 k.m, for all leads including all lifts involved. |
9 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size). Including VDF |
11 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, columns. |
12 | Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
13 | Brick work with common burnt clay machine moulded perforated bricks of class designation 7.5 conforming to IS: 2222 in superstructure above plinthlevel up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With F.P.S.(non modular) bricks |
14 | 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 (1 cement: 4 coarse sand) |
15 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
16 | Removing and refixing of Barbed wire at Boundary Wall all etc complete. |
17 | Removal of trees very carefully with the help of mechanical machines and rapping in gunny bags and transporting to a distance of 2 km, preparing a new pit after excavation and replanting the same at a distance of upto 2 kms, including watering for a period of 15 days. Electrical distribution main line is passing near to it. additional care to be taken while removing. Crane help should be considered for removed. |
18 | 12" * 4" ACP sheet board with iron frame of 1.5"" *1.5"" pipe painting writing of board with vinyl tape cutting and pasting as per design and chemical lamination done on it. |
19 | 6" * 4" ACP sheet board with iron frame of 1.5"" *1.5"" pipe and two legs of 2"" * 2"" and height 10 feet pipe painting writing of board with vinyl tape cutting and pasting as per design and chemical lamination done on it. |
20 | Providing and laying cement concrete in near ground level including the cost of centering, shuttering and finishing. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
21 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming and paint coat of approved steel primer and two coats of paint all complete. |
22 | Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately). |
23 | Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately). |
24 | Providing and fixing in position chair bench with back rest in red colour finish (make-dalal, concrete or equivalent). Each bench consists of 2 Nos. l-shape base suport in grey cement colour(thickness-100mm, back height- 1000mm, front height-450mm, basewidth-620mm) and 5 Nos. reinforced concrete planks in red colour of size 1500mm * 100mm * 50mm , and 1 No. of reinforced concrete plank of size 1500mm * 200mm *50mm. including freight, loading and unloading complete as directed by Engineer-in-charge. |
25 | Providing and fixing of convex safety mirror with curvature of 130 degree"s, diameter of 60cm made up ofpolycarbonate, orange colour, traffic mirror round wide angle drive way mirror for cars, with adjustible bracket of 48mm and nut bolts for installation.(Make ABS industies or SNS safety limited or equivalent.) Note- pole and concrete for foundation will be paid separately. |
26 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 1.5 sq.mm |
27 | Supply and fixing of 2 core 2 sq mm PVC insulated wire for Music system in already alreadyPVC conduit all as specified and/ or required etc complete, Ref.: Finolex 2 sq mm (14 AWG) 2 core transparent copper speaker wire PVC insulated IS 694:2010 certified |
28 | Providing, laying and fixing of 25 mm heavy duty, ISI PVC pipe along with band, junctions and all accessories in existing trench inground complete withbends and collars etc. as required. |
29 | Supply, installation, testing and commissioning of 20 W garden speaker rock shapedwith thick scratch resistance coating, waterproof, suitable for outdoor installation, minimal transmission losses. Ref.:-similar to NVS-10030020GS |
30 | Supply, erection, testing and commissioning of booster amplifier of 6 Zone integrated PA host with 250W amplifier all as specified and/ or directed etc., complete. Ref. model no :- NVS-PA0028006CP. |
31 | Supply, erection, testing and commissioning of power amplifier 2*250W 2 Channels digital power amplifier as specified and / or directed etc., complete.ref. NVS-20110502AM |
32 | Supplying of LED luminaire as per below mentioned specification of make/brand as per approved list in DTS and fixing of the same by providing required, clamps, TW guttas, bolt-nuts/screws, washers, making electrical connections, earthing etc., as required/ directed by engineer-in-charge Mounting type :- Pedastal mounting. Type :- Bollard light 800mm height IP-65 grade. System lumens :- Not less than 1000 lumens System rated power :- 230V, 50Hz, 07Watts (+/- 5%) Color temperature :- Not less than 5700K Housing:- Minimum 2mm thickness MS housing with powder coat paint. Diffuser :- Transluscent diffuser. Driver :- Electronic LED driver duly pre-wired up to terminal block. Ref model :- Havells TURIN LED BOLLARD 10W. |
33 | Excavation of cable trenches in soft soil, depth upto 800mm including dressing of sides lift upto 800mm, including getting out the excavated soil, refilling with sand and brick bat up to 300mm and refilling good soil remaining 500mm depth after laying of cable/pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 meters. |
34 | Providing, laying and fixing following dia G.I pipe (medium class) in ground complete with G.I fittings including trenching (75 em deep) and refilling etc. as required with G.I fittings including trenching (75 em deep) and re-filling etc. as required. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail