Construction Of Toilet Block And Urgent Repairs For Rajeev Gandhi Govt. English Medium High School, Yanam (2Nd Call)
Tender Value
29.77 Lakhs
Estimated cost
Bid Submission
14 Feb 2024
0 days left
EMD
59544
Bank guarantee accepted
Document Fee
525
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
yanam → Puducherry
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Toilet Block And Urgent Repairs For Rajeev Gandhi Govt. English Medium High School, Yanam ( 2Nd Call )
BOQ
| Sl. No. | Item Description |
| 1 | 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavation) / manual means over areas (exceeding 30 cm in depth, 1.5min width as well as 10sqm on plan) including getting out anddisposal ofexcavated earth, lead upto 50m and lift upto 1.5m - all kinds of soil. |
| 2 | 2.27 Supplying and filling in plinth with river sand under floors, including watering,ramming consolidating and dressingcomplete. |
| 3 | 4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size). |
| 4 | 4.17 Making plinth protection 50mm thick ofcement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm thick bed of drybrick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. |
| 5 | 5.9.1 Centering and shuttering including strutting , propping etc and removal of form for - foundations, footings, bases ofcolumns etc for mass concrete. |
| 6 | 5.9.6 Centering and shuttering including strutting , propping etc and removal of form for - Columns , Pillars, Piers,Abutments , Posts and Struts. |
| 7 | 5.9.3 Centering and shuttering including strutting , propping etc and removal of form for - Suspended floors , roofs , landings, balconies and access platform . |
| 8 | 5.9.5 Centering and shuttering including strutting , propping etc and removal of form for - Lintels , beams , plinth beams ,girders , bressumers and catilevers. |
| 9 | 5.1.2 Providing and laying in position specifiedgrade of reinforced cement concrete excluding the cost of centering , shuttering , finsishing and reinforcement -All work upto plinth level 1:1.5:3 (1cement1.5 coarse sand :3 graded stone aggregate 20 mm nominal size). |
| 10 | 5.2.2 Reinforced cement concrete work in walls (any thickness) , including attached pilasters, buttresses , plinth and stingcourses , fillets , columns , pillars , piers , abutments , posts and struts etc.upto floor five level excluding cost ofcentering , shuttering, finishing and reinforcement - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 11 | 5.3 Reinforced cement concrete work in beams, suspended floors , roofs having slope up to 15degree landings , balconies , shelves ,chajjas , lintels , bands, plain window sills , staircases and spiral stair cases upto floor five level excluing the cost ofcentering, shuttering, finishing and reinforcement , with 1:2:4 (1 cement : 2coarse sand :4 graded stone aggregate 20mmnominal size) . |
| 12 | 5.18.1 Providing precast cement concrete jali1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning , fixing and finishing in cement mortar 1:3 ( 1 cement : 3 finesand) etc. complete excluding plastering ofthe jambs, sills and soffits - 50mm thick. |
| 13 | 5.22.6 Steel reinforcement for R.C.C.work including straightening , cutting , bending placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (TISCON / VIZAG/ IISCO / SAIL / JSW) Fe - 415 or more. |
| 14 | 5.22A.6 Steel reinforcement for R.C.C.work including straightening , cutting , bending placing in position and binding all complete above plinth level - Thermo -Mechanically Treated bars (TISCON / VIZAG /IISCO / SAIL / JSW) Fe - 415 or more . |
| 15 | 6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 coarse sand). |
| 16 | 6.4.2 Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 7.5 in superstructure above plinth levelupto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 coarse sand). |
| 17 | 6.13.2 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level - cement mortar 1:4 (1 cement : 4 coarse sand). |
| 18 | 6.15 Extra for providing and placing in position2 nos 6mm dia M.S.bars at every third course of half brick masonry. |
| 19 | 9.63.3R Providing and fixing ISI marked powder coating tower bolt black finish (Barrel type) with necessary screws etc.complete -200 x10 mm |
| 20 | 9.119 Providing and fixing factory made P.V.C.door frame of size 50x 47 mm with a wall mm rigid PVC foam sheet, mitred at corners and joined with 2 nos , of 150mm longbrackets of 15 x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 x19 mm M.S.square tubeof 19 gauge , EPDM rubber gasket weatherseal to be provided through out the frame The door frame to be fixed to the wall using M.S.screws of 65 / 100 mm size, complete as per manufacturter\" specificationthickness of 5mm , made out of extruded 5. |
| 21 | 9.124.1 Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm X 30 mm having wall thickness 5 mm . The styles, top & bottom rails shallhave one side wall thickness of 15 mm integarally extruded on the hinge side ofthe profile for better screw holding power.The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mm x 1 mm , painted with primer , all four cornersof reinforcement to be welded or sealed .Solid PVC extruded bidding (push fit type) will be set inside the styles and the railswith a cavity, to recive single piece extruted 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement &self driven self tapping screws. Single piece extruded solid PVC lock rail of size100 mm X 30 mm with wall thickness 5 mm &15 mm integrally extruded in the middle of the lock rail & fixed with styles with thehelp of PVC solvent cement and self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer\"sspecifications - Non decorative finish . |
| 22 | 10.25.2 Steel work welded in built up sections /framed work , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder,railings, brackets,gates and similar works. |
| 23 | 11.36 Providing and fixing 1st quality ceramicglazed wall tiles conforming to IS : 15622 (thickness to be specified by themanufacturer) , of approved make , in all colours , shades except burgundy , bottle green , black of any size as approved in skirting , risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement with pigment of matching shade complete. |
| 24 | 11.40 Providing and laying rectified glazedceramic floor tiles of size 300 x 300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make (Somany / Nitco /Jhonson) in all colours, shades, exceptwhite, ivory, grey, fume red brown, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the jointswith white cement and matching pigmentsetc., complete. |
| 25 | 12.41.2 Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermalexpansion, (i) Single socketed pipes - 110mm diameter . |
| 26 | 12.42.5.2 Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ringconforming to IS: 5382, leaving 10mm gap for thermal expansion -bend 87.5 degree - 110 mm bend. |
| 27 | 12.42.6.2 Providing and fixing on wall faceunplasticised - PVC moulded fittings /accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion -shoe (plain) -110mm shoe. |
| 28 | 13.1.2 12mm cement plaster of mix -1:6 ( 1 cement: 6 fine sand) |
| 29 | 13.2.2 15mm cement plaster on the rough side of single or half brick wall of mix - 1:6(1cement : 6 fine sand) |
| 30 | 13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3fine sand) |
| 31 | 13.48.1 Finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacture\"s specification -Two or more coats applied on walls@ 1.25ltr / 10 sqm over and including one coat of special primer applied @ 0.75 ltr / 10 sqm. |
| 32 | 14.5.1 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty- Float glass panes ofthickness 4mm. |
| 33 | 16.96 Supplying fixing and commisioning of Suguna / Texmo / Sharp 2 HP monoblock pumpset slow speed single phase motor. The rate includethe cost of pumpset, pumpset fixing in position and test run etc. complete . |
| 34 | 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C flusing cistren, including flush pipe , manually controlled device (handle lever) conforming to IS : 7231 , with all fittings and fixtures complete ,including cutting and making good the wallsand floors wherever required. White vitreous china Orissa pattern W.C.pan of size 580x440mm with integral type foot rests. |
| 35 | 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European typeW.C.pan) with seat and lid, 10 litre lowlevel white P.V.C. flusing cistern, including flush pipe, with manually controlled device (handle lever),conforming to IS: 7231,with all fittings and fixtures complete, including cutting and making good the walls and floorswherever required - W.C. pan with ISImarked white solid plastic seat and lid. |
| 36 | 17.6.1 Providing and fixing one piece constructionwhite vitreous china squatting plate with an integral longitudinal flushing pipe, white PVC . Automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I.clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required - singlesquatting plate with 5 litre PVC.automatic flushing cistern. |
| 37 | 17.7.4 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps , 32mm C.P.brass waste of standard pattern , including painting of fittings and brackets cutting and making good the walls wherever required - white vitreous china flat back wash basin size 550x400 mm with single 15mm C.P. brass pillar tap. |
| 38 | 17.78.1 Providing and fixing CP brass health faucet of approved quality - 15 mm nominal bore. |
| 39 | 18.8.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing ofpipes & fittings , with one step CPVCsolvement cement and the cost of cutting chases and making good the same including testing of joints complete - Concealed work , including cutting chases and making goodthe wall etc - 32 mm nominal outer diapipes. |
| 40 | 18.9.1 Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermalstability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete - external work - 15mm nominalouter dia pipes. |
| 41 | 18.9.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement trenching, refilling & testing of joints complete - external work - 20mm nominal outer dia pipes. |
| 42 | 18.48A Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked , with cover and suitable locking arrangement and making necessary holes for inlet, outlet andoverflow pipes but without fittings and the base support for tank - Circular Tank. |
| 43 | 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms - 15mm nominal bore. |
| 44 | 19.33.1 Providing and fixing on wall / column faceunplasticed - PVC soil and waste pipes (type - B) conforming to IS : 13592- 1992 including jointing with seal ringconformation to IS : 5382 leaving 10mm gapfor thermal expansion - single socked pipes -110mm diameter. |
| 45 | 19.33.1A Providing and fixing on wall face/ columnface unplasticised - PVC moulded fittings / accessories for unplasticisd - PVC soil and waste pipes conforming to IS : 14735 -1999including jointing with seal ringconforming to IS : 5382 leaving 10mm gapfor thermal expansion - Single tee withdoor - 110 x110x110 mm. |
| 46 | 19.33.1C Providing and fixing on wall face / columnface unplasticised - PVC mould fittings / accessories for unplasticisd - PVC soil andwaste pipes conforming to IS : 14735 - 1999 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion - bend 110 mm . |
| 47 | 19.33.2 Providing and fixing on wall / column face unplasticised - PVC soil and waste pipes(type B) conforming to IS :13592 - 1992including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion - Single socketed pipes 75mm diameter |
AI Tender Summary
Tender Timeline
Feb 05, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 14, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 15, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender