Military Engineer Services-MES has published Tender For Additional/Alternator To Jcos /Ors Married Accommodation At Joginder Vihar At Hisar Mil Station. Submission Date for this Tender is 16-03-2024. Mobile Generator Tenders in hisar Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 24-Feb-2024 | Date Corrigendum No. 01 | Date | 09-03-2024 |
| 2 | 28-Feb-2024 | Amendments in tender documents alongwith Revised pages and Revised BoQ | BOQ | 09-03-2024 |
| 3 | 09-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-03-2024 |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed. |
| 3 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specifiedand directed. |
| 4 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specifiedand directed. |
| 5 | S&F pressed steel frames of size 105mmx60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 6 | S&F pressed steel frames of size 125mmx60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 7 | S&F for 1mm thick factory made pressed steel shutter fixed with 1.25mm thick pressed steel frame of 105mm x 60mm and as reqd for cupboards (consisting two shutters) including 06 Nos hinges of size 100mm long and Godrej pattern three way locking system with suitable shape & size 12mm dia MS rod & 01 Nos chromium plated handle of size 150mm long with & including two coats of shop spray synthetic enamel painting over a coat of red oxide primer as colour approved by GE complete all as specifiedand directed.. Note (i) :Cupboards frame to be fixed with 06 Nos nuts & bolts of dia 12mm & 150mm long at vertical outer edge of cupboards brick wall / concrete surface including making good the distrubed surfaces complete all as specified and directed. (ii)Concrete for back filling in frame and for fixing holdfast PCC nominal mix1:2:4 typeB-0 considered in same and unit rate of hinge & PCC are included in this quoted rate. (iii)For payment purpose , area of front elevation shall be considered. |
| 8 | S&F 30mm flush door shutters, soild core construction, with block board core and plywood face panels, commercial type both sides complete all as specified and directed. |
| 9 | S&F factory made 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (with sash bars) edges but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers as specified in SSR Part-I Section 8 Clause 8.24(a), fitted to chowkats complete all as directed. |
| 10 | S&F factory made mild steel windows (Box Type) with side hung shutters including glazing bars to receive glass, dovetailed or weldedwith and including necessary welding, reveting, tower bolt, hanlde, holdfast, hinges, steel peg stay including one shop of zinc chromate primer as per Drg No.CEJZ/TD-2013/01 sheet (1/3, 2/3, 3/3) complete all as specified and directed. |
| 11 | S&F factory made mild steel windows (Box Type ) with side hung shutters without glazing bars but including sash bars to receive wire gauge, dovetailed or weldedwith and including necessary welding, reveting, tower bolt, hanlde, holdfast, hinges and steel peg stay stay including one shop of zinc chromate primer as per Drg No.CEJZ/TD-2013/01 sheet (1/3, 2/3, 3/3) complete all as specified and directed. |
| 12 | S&F factory made mild Steel ventilators with top hung shutter (Box Type) including glazing bars to receive glass to receive glass or wire guage and steel peg stay with and including necessary welding, reveting, tower bolt, hanlde, holdfast & hinges complete all as specified and directed. |
| 13 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 14 | M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, hand rails, cupboards frame and similar work conforming to Fe.290.Gde-E-165 with and including necessary cutting and welding complete all as specified and directed. |
| 15 | M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 16 | M&L preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 17 | M&L PCC 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) as in steel chowkhats, hold fasts and bed blocks etc including necessary form work complete all as specified and directed. |
| 18 | S&F stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters complete all as specified and directed. |
| 19 | Supply and fixing acrylic transparent sheets 3mm thick in square / rectangular area of each pane not exc 0.5 sqmand fixed /lock with window frame by using PVC snap beeding with necessary self tapping reviting / screwing and suitable method with and including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones as directed. |
| 20 | Supply and fixing acrylic frosted/figured sheets 3mm thick in square / rectangular area of each pane not exc 0.5 sqmand fixed /lock with window frame by using PVC snap beeding with necessary self tapping reviting / screwing and suitable method with and including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones as directed. |
| 21 | S&F stainless steel butt hinges medium weight of size 100 mm fixed with stainless screws complete all as specified and directed. |
| 22 | S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 23 | S&F 200mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed. |
| 24 | S&F extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed. |
| 25 | S&F 140mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed. |
| 26 | S&F mild steel 300mm, ordinary rat rail rod pattern springs, including roller and roller plate complete all as specified and directed. |
| 27 | S&FMagnet door catcher heavy duty, premium quality complete all as specified and directed. |
| 28 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 29 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 30 | M&L for 75mm thick (1:3:6) Type-C-2 (using 40mm graded crushed stone aggregate) as in plinth protection complete all as specified and directed. |
| 31 | M&L non skidceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:4) compete all as specified and directed. Note:- Tiling work shall be done with spacer of 3 to 5 mm and using tile leveling machine for checking level of adjecent tiles. This provision rate shall be included in rate quoted by the contractor. |
| 32 | M&L non skid coloured designer ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:4) compete all as specified and directed. Note:- Tiling work shall be done with spacer of 3 to 5 mm and using tile leveling machine for checking level of adjecent tiles. This provision rate shall be included in rate quoted by the contractor. |
| 33 | All as per item No.32 above but on skirting over with and including 10mm thick backing coat in CM 1:3 complete all as specified and directed. Note:- Tiling work shall be done with spacer of 3 to 5 mm and using tile leveling machine for checking level of adjecent tiles. This provision rate shall be included in rate quoted by the contractor. |
| 34 | M&Lglazed ceramic coloured, designer & pattern (dark & light shade combination) tilesin450mm x 300mm x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:3and complete all as specified and directed. Note:- Tiling work shall be done with spacer of 3 to 5 mm and using tile leveling machine for checking level of adjecent tiles. This provision rate shall be included in rate quoted by the contractor. |
| 35 | M&L Black granite (of any type), 250 mm thick machine cutlaid over cement screed as in cooking platform and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the Black granite stone including cutting and polishingwith and including 15mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed. |
| 36 | M&LBlack granite (of any type), 20mm thick machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of Black granite stone including grinding and polishing complete with and including backing coat in 10mm thick CM (1:3)to receive granite complete all as specified and directed. |
| 37 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc (laid, bedded and pointed in any mortar) complete all as specified and directed. |
| 38 | M&L for Machine cut kota stone slab flooring 18-20mm thick of size not less than 0.30 Sqm of each slab over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 15mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed. (Note : Single piece tiles will be placed on the surface of stair case tread area). |
| 39 | M&L for Kota stone slab 15mm thick in riser of bricks steps & riser of staircase , skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing with & including backing coat in 10mm thick CM (1:3) to receive Kota Stone complete all as specified and directed. (Note : Single piece tiles will be placed on the surface of stair case riser area) |
| 40 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. (Note : Single piece tiles will be placed on the surface of stair case riser area) |
| 41 | Demolition of reinforced cement concrete of roofs, floors (other than ground floors), beams, staircases, landing, chajjas upto three storeys, RCC Water tanks and similar suspended work and making good the disturbed area in CM 1:3. and of any type and description not otherwise described for complete all as specified and directed. |
| 42 | M&L RCC 1:2:4 Type-B1 (20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like incl necessary forms works complete all as specified and directed. |
| 43 | S&F TMT Mild Steel bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 44 | M&L for formwork of soffits of suspended slabs such as roof slab, floor slabs, landigs, shelves and similar work, not exc 200mm thick rough finished surfaces of concrete complete all as specified and directed. |
| 45 | Dismantling roof tiles, single layer on roofs complete all as speified & directed. |
| 46 | Demolition of mud in roofs, any thicknes, including plastering and leeping (whether full thickness removed or only or part thereof)complete all as speified & directed. |
| 47 | M&L for preparation of roof surfaces (old or new) with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particles with and including providing 40 mm average thickPCC 1:2:4 type B-0 (using 20mm graded stone aggregate) with maintain the proper roof slope as in bedding,coping and kerb complete all as specified and directed. |
| 48 | M&L Screed bed or bedding layer of mortar 10mm thick in cement mortar 1:3 and finishing even and smooth with mixing of liquid WPC on roof surfaces. Note : WPC shall be measured and paid seperately in respectve item. |
| 49 | Supply only liquid water proofing compound. |
| 50 | M&L for applying roof treatment on top of roof with APP modified membrane (minimum 3mm thick) weighing not less than 3.50Kg per Sqm, consisting of 90 micron center core HMHDPE (High molecular high density polyethylence)laid by torch application method ofoverlap 100mm on length and 100mm on the width side as per manufacture"s instructions over a coatof hot air blown grade bitumen 85/25 @ 1.20Kg/Sqm over a coat of approved cold applied bituminous oil based primer (IS-3384) @ 300 gm/sqm complete and applying two coats of aluminium paint over APP membrane complete all as specified and directed. |
| 51 | S&F in repair Vitreus china wash down water closet pan (Padestal pattern )while excluding fixing bolt,flushing cistern , flushing pipe and inclusive ofplastic water closet seat cover and mild steel chromium plated or aluminised hinging device and complete all as specified and directed. |
| 52 | S& Fin repair Brass SS Jet Spray with 1 meter pvc tube and complete all as specified and directed. |
| 53 | S&F as in repair vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PTMT trap of suitable size( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc completeincluding provision of cement concrete bedding & making good to floor complete all as specified and directed. |
| 54 | S&F as in repairs 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as reqd complete all as specified and directed. |
| 55 | S&F Vitrous china wash hand basin, white, flat back of size 550 x 400 mm white excluding taps,and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets, PTMT waste coupling of 32 mm dia (half or full threaded) (Min wt 45 gms /40 mm -60 gms) & waste pipe as suitable complete all as specified and directed. |
| 56 | Taking up or down 15mm bore steel / composite / UPVC tubing and connection from any position concealed / exposedincluding cleaning for refixing or removal to store complete all as specified and directed . |
| 57 | S&F 15 mm bore steel water GI tube medium grade with all fittings / connections including MS clamps / clips and necessary screwingas reqd and fixed with or without concealed to walls & surface of roof slab with and including making good to required surfaces by using white cement complete all as specified and directed . |
| 58 | Re-fixing old 15mm bore steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd in new or old position and fixed with or without concealed to walls, ceilings or laid in floors completeall as specified and directed . |
| 59 | Taking up or down 20mm bore steel / composite / UPVC tubing and connection from any position concealed / exposedincluding cleaning for refixing or removal to store complete all as specified and directed . |
| 60 | S&F 20 mm bore steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed . |
| 61 | Re-fixing old 20mm bore steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd in new or old position and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed . |
| 62 | S&F Stop valves of size 15mm dia fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 63 | S&F 15mm dia CP angle valves complete all as specified and directed. |
| 64 | S&F Wall Mixer 3-in-1 System with 115 mm Bend Pipe & Aerator complete all as specified and directed. |
| 65 | S&FCP Central Hole Basin Mixer with ‘U’ shape Round Casted Spout with 450 mm Long Braided Hoses complete all as specified and directedby Engr-in-Charge. |
| 66 | S&F CP Sink Mixer with Swinging Casted Spout with Aerator complete all as specified and directed. |
| 67 | S&F as in repair 15 mm bib tap ( fancy type) , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 68 | S&F 15 mm dia Stop valves / gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 69 | S&F as in repair 20 mm dia Stop valves / gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 70 | S&F as in repair CP soap dish holder fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 71 | S&F brass chromium plated shower roses of size 125mm with or without swivel joints, any size, including shower arm 15mm size, 195mm long bend of 45degree with flange of CP fixing to steel pipe or union complete all as specified and directed. |
| 72 | S&F stainless steel , premium type, peg set of 6, heavy weight complete all as specified and directed. |
| 73 | S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed. |
| 74 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 75 | S&F brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed withl screws complete all as specified and directed. |
| 76 | S&F superior qualitySSCurtain rod, 20mm diawith and includingSS bracket 2 Nos of each opening andfency type SSside knobof required shape and size 2 Nos of each opening as approved by Engr- in charge and complete all as specified and directed. |
| 77 | S&F as in repair single/multi PVC (SWR) floor trap 75mm dia, plain with grating including joining to waster pipe, fixed in cement concrete type B-1 (1:2:4) using 20mm graded broken stone aggregate complete all as specified and directed. |
| 78 | Dismantling of cast iron pipes any size of bore as in soil waste or vent pipe including removal of cement joints fixed to wall or laid in floor complete all as specified and directed. |
| 79 | S&F110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors including necessary MS clampscomplete all as specified and directed. |
| 80 | S&F75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors including necessary MS clampscomplete all as specified and directed. |
| 81 | S&F 110 mm PVC (SWR) access door bends any radiuscomplete all as specified and directed. |
| 82 | S&F 75 mm PVC (SWR) access door bends any radiuscomplete all as specified and directed. |
| 83 | S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed. |
| 84 | S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed. |
| 85 | S&F 110mm PVC (SWR) vent cowl complete all as specified and directed. |
| 86 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 87 | M & L for Brick work with Fly Ash Bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete andall as specified and directed. |
| 88 | M & L for Brick work of Fly Ash Bricks old size, straight or curved on plan to any in half brick thick walls , built in cement mortar 1:4 complete andall as specified and directed. |
| 89 | Taking down cement plaster of any description upto three storeys including necessary scaffoldings including raking out joints, hacking for key, scrubbing down with water etc. from wall & ceiling surfaces complete all as specified and directed. |
| 90 | M&L rendering 10 mm thick in CM 1:6 on fair face of brick /concrete surfaces of any description and finishing the surfaces even and smooth without using extra cement complete with complete all as specified and directed. |
| 91 | M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of same make complete all as specified and directed. |
| 92 | M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of same makewith and including complete removal of existing treatment of any layer of wall by sanding with internal dust extraction system for clean environmentand complete all as specified and directed. |
| 93 | M&L for preparing new plastered or unplastered surfaces of walls and applying three coats of white wash on undecorated surface complete all as specified and directed. |
| 94 | M&L preparing old plastered or unplastered surfaces of walls and applying two coats of white wash on old decorated surface with and including complete removal of existing treatment of any layer of wall complete all as specified and directed. |
| 95 | M&L for rendering 5mm thick in CM 1:3 as in ceiling/landing etc on concrete surface finish even and smooth without using extra cement complete all as specified and directed. |
| 96 | M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash on undecorated surface complete all as specified and directed. |
| 97 | M&L for preparing old plastered or unplastered surfaces of ceiling and applying two coats of white wash on old decorated surface with and including complete removal of existing treatment of any layer of ceiling surfaces complete all as specified and directed. |
| 98 | M&L rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement / manufacturer"s instructions on brick/concrete wall surfaces of any description, and finishing the surfaces even and fair complete all as specified and directed. Note :- Water proofing compound shall be measured and paid seperately. |
| 99 | M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of acrylic smooth exterior paint over and including one coat of exterior wall primer as aprproved by Manufacture complete all as specified and directed. |
| 100 | M&L for Complete removal of existing treatment by sanding with internal dust extraction system for clean environment, washing down and stopping of distempered and painted surfaces and applying two coats of acrylic smooth exterior paint over and including one coat of exterior wall primer as aprproved by Manufacture complete all as specified and directed. |
| 101 | S&Frotational mouldedpolythene water storage tank, 3 Layer 500 ltrs (cylindricalvertical with closed top) hoistedand fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 102 | S&F as in repair rotational mouldedpolythene storage tank, 3 Layer,500 ltrs (cylindricalvertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 103 | Disconnecting existing tanks of capacity exceeding 250 liters but not excedding 500 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 104 | S&F 20mm bore dia ballvalves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms.) complete all as specified and directed. |
| 105 | S&F as in repairs 20mm bore dia nipple suitable for HDPE water tank (Min weight 20mm-45gms)fixed complete all as specified and directed. |
| 106 | M&L for preparation of old painted steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 107 | M&L for writing letters or figures (Block, Roman, Italic or Indian) n. exc. 30 cm high with synthetic enamel paint as required for marking of building numbers all as specified and directed. |
| 108 | S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including PTMT waste coupling & waste pipe 900mm long complete all as specified and directed. |
| 109 | S&F Kitchen platerackof overall size 750 mm x 600mm x 250 mmcomplete all as specified and directed. |
| 110 | S&F corner glass shelf 300mm (with brass brackets) complete all as specified and directed. |
| 111 | M&L preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paintover a coat of red oxide primercomplete all as specified and directed. |
| 112 | M&L for treatment of sunken floor slab comprising of the following specifications with and including demolitionof PCC in sunken portion/ floors including removal of the debris outside the MOD land andcomplete all as specifiedand directed:- (i) Demolition of PCCin sunken portion /floors and Cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely.Provision of 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding concrete to achieve proper slope including S& f in repair 40 mm dia , 450 mm long medium grade spout pipeand cutting holes in bricks or RCC wall for the same |
| 113 | (ii) Rendering of uneven surfaces atbottom and sides up to floor level with 15 mm thick CM 1:4 mixed with and including integral water proofing compoundas approved by GE @ 0.2% by wt of cement consumed including filling it with water to check dampness and seppage and where dampness / seppage is noticed, nozzles shall be fixed and grouting carried out. (iii)All junctions points of side wall where CI/GI/PVC pipes are passing through shall be sealed with epoxy putty as approved by GE. (iv)After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. (v) Applying two coats of polymer modified cementious water proof coating with as approved by GE in two coats @ 3kg/sqm to sanwiched with glass fibre reinforcemn as approved by GE over base coat as per mnaufacturer"s instruction to bottom and vertical sides up to finished floor level+100mm height.The thickness of two layer shall be 1mm.When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion. |
| 114 | (vi)Allpipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint (vii) The sunken floor shall be filled with lean concrete 1:5:10, type E2(40 mm graded aggregate) Note :- Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. Test record for each sunkenslab shall be maintained.The treatment shall be carried out by authorised applicators of chemicals. Cost of testing and all M&L is inclued in the rates quoted above. |
| 115 | Cutting holes into or through cement concrete slabs and cutting through reinforcement chajjas, etc reinforced or other wise surfical area n.exc 100 sqcm as directed to insert angle iron for holding chajjas / coller platforms as required complete all as specified and directed. |
| 116 | S&F Joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated), for cooler stand, chajjas complete all as specified and directed. |
| 117 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall and in chajjas, fixed with self tapping screws complete all as specified and directed. |
| 118 | S&F rolled mild steel framed work as in doors or gates of angle or other section conforming to FE-410-W (Gde-E-250) Quality A, with gusset plates, rails braces, etc complete drilled for fixing of sheets and including steel sheeting or other covering and hanging and fixing complete as in garrage door and roof access door complete all as specified and directed. |
| 119 | Providing and Erecting steel props (upto Full Height ,Braced at centre, resting on wedge and block to support the structure provisionally during repair work and maintaining them in position till required and complete all as specified and directed. |
| 120 | Chipping of loose/ damaged /cracked / previously repaired / delaminated or weak concrete by chieseling to expose the sound core concrete where ever required and to expose rusted reinforcement upto depth n.exc 50mm and disposal of rubbish off the premises to a distance not exc 50 mtrs including cleaning of reinforced concrete surface by air compressor complete all as specified and directed. |
| 121 | Supply and apply of rust remover cum passivator to remove rust from existing reinforcement by using product as approved by GE, with density 1.01 Kg/ltr at 30 degree celsius and consumption : 0.2 Kg/Sqm/coat complete all as specified and directed. Note: The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar). |
| 122 | Supply and apply a cement based polymer modified rebar corrosion protection system to existing reinforcement using cement based polymer modified rebar corrosion protection system with consumption: 3.75 kg/Sqm for two coats andProduct requirements: carbonation resistance: 2 mm of chemical compoundas approved by GE corresponds to 20 mm of normal mortar; bond strength > 1N / Sqmm according to ASTM C 882-78 complete all as specified and directed. Note: The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar) |
| 123 | Providng extra reinforcment with TMT bars as per site design requirement including straightening, cutting, bending, placing in position ,binding with GI wire of 18 gauge etc complete in all respects .Additional reinforecment with hadequate lap length & rings at required spacing shall be tied with existing reinforcement using binding wire or welded complete as per site requirement and directions. |
| 124 | Providng and fixing rebar of required length 160 mm & diameter 16mm withEpoxy Resin wherever required in RCC members including power drilling ,cleaning of holes, then rebars should be inserted in holes that should be filled with epoxy to ensure the bond as per manufacturer recommendation complete as per site requirement and directions. |
| 125 | Providng and fixing rebar of required length 200 mm & diameter 20mm withEpoxy Resin wherever required in RCC members including power drilling, cleaning of holes, then rebars should be inserted in holes that should be filled with epoxy to ensure the bond as per manufacturer recommendation complete as per site requirement and directions. |
| 126 | Providing and fixing shear connectors of 16 mm dia TOR steel upto 160 mm LengthEpoxy Resin RCC Members including power Drilling, cleaning of holes, insertion of epoxy, placing shear connectors in position to ensure the bond as per manufacturer recommendation complete as per site requirement and directions. |
| 127 | M&L for Providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer"s specification including prepartaion of surface thoroughly and cleaning complete where ever required with using Produc as approved by GE with Consumption: 0.4 kg/Sqm and Product requirements: Complies with ASTM C 881-78, Type II Grade 2 Class B+C complete all as specified and directed. |
| 128 | Providing and fixing water tight centering & shuttering including bolting, strutting, propping etc. including removal of form work from column, beam , slab etc. complete as per site requirement omplete all as specified and directed. |
| 129 | Supply and apply a ready to use non shrink, cementitious free flow micro-concrete (<100 mm) using Product: as approved by GE, Product requirements: compressive strength > 60 N/Sqmm (28 days) according to ASTM C 1107-99 complete all as specified and directed. |
| 130 | M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortaras approved by GE at an average thickness exceeding 10mm and upto 25mm to the prepared concrete surface in soffit of slabs, beam, columns, parapets, fins and facias at any height, including finishing of applied Polymer mortar as per thetechnical specifications and manufacturer"s instructions complete all as specified and directed . |
| 131 | M&L for weld-mesh of size 75x75x3mm to be wrapped on the exposed surface of rib of beam & on the slab bottom and tack welding to the exposed reinforcement at close intervals and gunite with cement mortar 1:3 mixed with admixtureas per manufacturer"s instructions as approved by GE around rib of beam or roof slab of thickness n.exc 40mm to be applied under an operating pressure.The gunitedsurface to be cured properly for a min of 7 days all in complete as per thetechnical specifications and manufacturer"s instructions and directed. |
| 132 | M&L for providing and fixing 12-16mm dia injection ports non returnable nozzle by drilling, cleaning and sealing holes 50-75 mm deep with fast setting high strength Epoxy putty, solvent free, three component compound based on epoxy resins, graded fillers and thixotropic agentsas approved by GEas in beams, columns, slab and parapets as per the technical specifications and manufacturer"s instructions complete all as specified and directed. |
| 133 | M&L for grouting of nozzles with low viscous moisture insensitive, High strength, epoxy resin groutas approved by GE with pressure not excedding 2-3 Kgf/Sqcm till the nozzle refuses to take further grout including cutting extra length of the nozzle after the grout hardens and finishes as per thetechnical specifications and manufacturer"s instructions complete all as specified and directed. |
| 134 | Making "V" Groove of 3mm wide and 3mm deep over crack line by electrically operated grinder with diamond concrete saw blade andcleaning it by Air Blower as directed. |
| 135 | Supply and Apply of rust non shrink repair mortar for non moving cracks in plaster and walls Product Consumption: 25 RMT/Kg for crack size of 6mm x 6mm Density: 0.85 Kg/l at 27°C |
| 136 | Supply and Apply of ready to use water resistant White Cement Based Finishing /smoothing material in 1.5 mm thickness for indoor and outdoor plastered surfaces. Product Coverage :1.2 Kg powder /Sqm/mm thickness System Requirement :tensile Adhesion >1.0 N/mm2 at 28 days (According to EN1348 ) water capillary Absorption 0.8 ml at 24 Hrs as per Karsten Tube Test, Water Retentivity >98%(according to EN 196-3) |
| 137 | Chipping of unsound weak concrete /cover of reinforcement over slab ,columns and walls or as per site requirement by chiseling maximum upto 40 mm depth and disposal of malwa from site as per instructions. |
| 138 | Supply and Apply a glass fibre reinforced acrylic modified Cementitious coating system Base coat : Consumption Base Coat: 1.5 Kg/ m2 Reinforcement Top Coat: Consumption of Top Coat: 1.5Kg/ m2 System requirements: Density 2.00 Kg/Ltr Compressive Strength: 20 N/mm2 , bond Strength 2.00 N/mm2 , approve for potable water contact |
| 139 | Supply and Apply a epoxy resin based solvent free bond coat Product Consumption: 0.4 Kg/m2 Product Requirements: Comlies with ASTM C 881 Type II Grade 2 Class B+C |
| 140 | Supply and Apply a pre Batched one component polymer modified cementitious patch repair mortar for a thickness of 20 mm or as directed by Engr-In-Charge Product Yield: Approx : 0.84 ltr/Kg System Requirments: compressive strength >=50 N/mm2 (28 days) according to ASTM C 109 ;flexural >= 3 N/mm2 (7 days) according to ASTM C 293-79 |
| 141 | M&L for cement concrete type D-2, 1:4:8 (using 40 mm graded gradedstone aggregate)in foundations, filling and mass concrete and in sub base of flooring/ hard standing complete all as specified and directed |
| 142 | Providing and laying 60 mm thick factory made chamfered edges cement concrete paver block (Rubber Moulded) of M-30 grade with approved colour ,design and patter as in footpath, park ,lawn, driveway, or light traffic parking, etc of required strength thickness and size made by table vibratory method using PU mould laid in required color and pattern over and including 50 mm thick compacted bed of coarse sand, compacting and proper embedding / laying of interlocking paver blocks into the sand beddings layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting the paver block as per required size and pattern, finishing and sweepping extra sand complete all as specified and directed |
| 143 | M&L Chequered cement concrete tiles 20 cm X20 cm X 25 mm thick over 15 mm thick bedding of CM 1:6 in floors, set, jointed and pointed in neat cement slurry with gray cement and pigment and complete all as specified and directed |
| 144 | M&L Pre-cast cement concrete Type B1 1:2:4 (20 mm graded aggregate) kerb Stone, setting in CM 1:4 and complete all as specified and directed. |
| 145 | Demolition and breaking up drain pipes (salt glazed ware or RCC or PVC) set in cement mortar 150 mm dia complete all as specified and directed. |
| 146 | Demolition and breaking up drain pipes (salt glazed ware or RCC or PVC) set in cement mortar 200mm dia complete all as specified and directed. |
| 147 | S&F RCC pipe class NP-2 laid to slope in trenchesjointed and tested complete with collars for 150 mm dia pipe complete all as specified and directed. |
| 148 | S&F RCC pipe class NP-2 laid to slope in trenchesjointed and tested complete with collars for 200 mm dia pipe complete all as specified and directed. |
| 149 | M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm dia pipe complete all as specified and directed. |
| 150 | M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 200mm dia pipe complete all as specified and directed. |
| 151 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed |
| 152 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed. |
| 153 | Removing excavated material (Soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 154 | M&L for Brick work with sub class "B" bricks straight or curved in plan exceeding6mtr mean radius with old size bricks in cement mortar 1:6 complete all as specified and directed. |
| 155 | M&L for Rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces with water proofing compound as per manufacturer’s instructions complete all as specified and directed. Note:- (WPC shall be measured and paid for separately under respectively item). |
| 156 | M&L for Rendering 10mm thick in cement mortar 1:3 on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement and complete all as specified and directed. Note:- (WPC shall be measured and paid for separately under respectively item). |
| 157 | M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in coping & benching including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work, finished even and smooth using extra cement complete all as specified and directed. |
| 158 | M&L for precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs for manholes (square/ rectangular/ circular of any type and size with Angle iron bend to shape of manhole etc, shelves and similar articles with plain faces including necessary formwork and setting in cement mortar 1:6 including necessary use and waste of formwork and demolition of existing RCC cover slabs complete all as specified and directed. |
| 159 | M&L for Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 160 | Demolition of existing vehicle garages of one block of JCO"s Qtr (one block comprised of 6 JCO"s Qtrs) inclding demolition of RCC slab,RCC lintel, brickwork, Iron door gate with complete fittings and inclusive of all other connected things required to be demolished of garage without damaging the adjacemt Bldg structure and removing the rubbish materialout of the MD land and levelling & finishingthe surface with adjacent ground surface and complete all as specified and directed |
| 161 | Demolition of existing vehicle garages of one block of OR"s Qtr (one block comprised of 6 OR"s Qtrs) including demolition of RCC slab, RCC lintel, brickwork, Iron door gate with complete fittings and inclusive of all other connected things required to be demolished of garage without damaging the adjacent Bldgs structure and removing the rubbish materialout of the MD land and levelling & finishingthe surface with adjacent ground surface and complete all as specified and directed |
| 162 | Taking down copper/aluminium point wiring (light, fan, bell, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. Note :- Cost of cutting/chasing in brick/stone masonary included in the unit rate of this item and nothing extra is payable on this account . |
| 163 | Taking down ceiling fan/exhaust fan of any sweep, sealing cable end, dismantling blades and removing fan and blades to store, removing regulator, and diconnecting electric connection from ceiling rose etc. and deposite to MES store yard of AGE E/M GE West Hisar complete all as specified and directed |
| 164 | Taking down carefully copper/aluminium sub main wiring of any size from surface/concelled/existing conduit of any height and removing materials at site and making good disturbed surfaces of wall, floors, roofs etc.complete all as specified and directed. |
| 165 | Taking down old unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/main switch including o;d unserviceable MCCBs/MCBs, isolators, etc. and making good to disturbed surface complete all as specified and directed |
| 166 | M&L for point wiring one light point/fan/bell controlled by one way switch with 1.5 sqmm PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia meadium duty, ISI marked to be terminated and includig pressed modular steel boxes & cover plate of module as required on site including 1.5 sqmm(22/.3mm) PVC insultated and unsheathed FRLS single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment complete all as specified and directed and as required for the following:- Note :- Cost of cutting/chasing in brick/stone masonary included in the unit rate of this item and nothing extra is payable on this account . |
| 167 | One light point controlled by one, one way switch 5 Amps |
| 168 | One light point controlled by one, two way switch 5 Amps |
| 169 | One Bell point controlled by One, Bell Push |
| 170 | One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 171 | One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 172 | One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. |
| 173 | All as per item No 164 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one no, one way switch on independent boardcomplete all as specified and directed |
| 174 | S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 voltscomplete all as specified and directed |
| 175 | S&F Modular switch 2 way 6A 1 module Single pole, two way, 230 voltscomplete all as specified and directed |
| 176 | S&F Modular switch 1 way 16A 1 modulecomplete all as specified and directed |
| 177 | S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts ACcomplete all as specified and directed |
| 178 | S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed. |
| 179 | M&L Buzzer, Ding Dong AC 230 volts, single pole ISI Marked a complete all as specified and directed |
| 180 | Supply and fixing modular bell push 6A 1 modulecomplete all as specified and directed |
| 181 | S&F modular fan step regulator 120W-2 module suitable for 1200/1400 mm sweep ceiling fan etc complete all as specified and directed |
| 182 | S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed |
| 183 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable sizecomplete all as specified and directed |
| 184 | S&F lamp holder, insulated body with back plate suitable for batten fittings and complete all as specified and directed |
| 185 | M&L for Sub main wiring with approved colour coding as per Is with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit. |
| 186 | S & F in replacement for Highly efficient LED Bulbs, 9 watts in B 22 cap complete all as specified and directed. |
| 187 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminum housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make- Make Bajaj Cat part No BCLAB 20W WH LED P, Wipro Cat part No LL20-281-XXX065 ALI or its equvalent in Philips, Havells. |
| 188 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed. Make Bajaj Cat part No ENXT P 24L WH CR PC SD (Edge plus series) or its equvalent in Philips, Wipro. |
| 189 | S&F Sheet Metal Enclosure Distribution Board VTPN, 4 Way, 415 Volt, Double Door Powder Coated, Protection Class IP-54, Isolated Neutral Bar, Mechanical Impact Strength IK09, Suitable for mounting MCB and/MCCB DBS Which confirms to IS-13032, IS 8632. BS5484, with minimum 200 amps, copper bus bar and grouting, fixing on wall with nut bolt washer, proper with PCC works complete all as specified and directed |
| 190 | S&F for sheet metal enclosure MCB DB SPN F, 8 way with 200 amps rated bus bar, 240 volt single door with magnetic locking system, including necessary provisions for inserting DB into wall by cutting brick/stone masonry etc and making good undisturbed surface to match with existing color of the wall complete all as specified and directed. |
| 191 | Supply and fixing MCCB, FP 63 Amps, 415 Volts, 16 kA rupturing capacity, IS marked IS-8828, of the under mentioned type and rating and fixing complete all as specified and directed. Note:- VTPN DB catered separate item under this schedule for payment purpose. (ii)Make of the MCCB shall be same of the DB. |
| 192 | S&F for MCB, Single Pole Rated Capacity 06 to 32 Amps, 240 Volt Breaking Capacity 10 KA, "C" Curve complete all as specified and directed. Note:- (i) DB catered separate item under this schedule for payment purpose. (ii) Make of the MCB shall be same of the DB |
| 193 | S&F for MCB, single pole and neutral rated capacity 32 amp, 240 volt breaking capacity 10 kA," C" curve complete all as specified and directed. Note:- (i) DB catered separate item under this schedule for payment purpose. (ii) Make of the MCB shall be same of the DB |
| 194 | Labour only for refixing the ceiling fan/exhaust fan obtained from item no. 161 above with replacement of size unserviceable cable 3 core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal including overhauling, painting of fan complete with two coats synthetic enamel paint by spraying including filing filing cavities with filer after cleaning all dust etc. and writing the MES number with synthetic enamel paint complete all as specified and directed. |
| 195 | S&F Ceiling Fan with Blade down rods, electronic regulator and accessories 230 V 1200 mm sweep complete all as specified and directed |
| 196 | Supply and fixing Heavy duty MS fans, Single phase, 230 volts 300 mm sweep complete including providing/ cutting the round/ square hole of required size in wall finishing the same for distrubed surfaces and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor complete all as specified & directed. |
| 197 | M&L,Earthing complete with galvanised mild steel earth electrode plate 600 X 600 X 6 mm thick buried directly and vertically in ground(earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to earthing test point all as specified and testing on completion including provision of earth wire protected by galvanised iron 15 mm bore medium grade pipe with all fittings from the earth electrodefixed along pole with and including 25 x 6mm flat iron clamp, bolts, nuts and washers and watering pipe shall be 20 mm bore GI medium gradefrom top of the earth electrode to bottom of the earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm x 300 mm(inner) and 250 mm deep including all excavation and earth work in any type of soil and removal of soil upto 50 metre, PCC pit with pre-cast RCC cover with handle, charcoal/salt, funnel, CI frame etc complete all as specified and directed. |
| 198 | Note: (i)The concrete pit shall be made in PCC 1:2:4 type B-O, using 12.50 mm graded crushed stone aggregate 40mm thick precast cover slabof RCC (1:2:4),type B-1,using 20mm graded crushed stone aggregate with suitable MS handle in lieu of CI cover. Reinforcement in cover shall be of 8mm dia TMT bars laid @150mm c/c both ways. (ii)Item includes the cost ofGI pipe for protectionof earthwire including earth wire up to 7.5 Metre. (iii) Any variation of GI pipe and GI wire belowor above 7.5 metreshall be adjusted through deviation. (iv)Earth electrode shall be surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides. |
| 199 | Supply and fixing propeller type AC ventilating fans, Single phase, 230 volts 250 mm sweep complete including providing/ cutting the round/ square hole of required size in wall finishing the same for disturbed surfaces complete all as specified and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor complete all as specified and directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
