|
| 1 | Disconnecting and taking out unserviceable any type Air termination rod and S&F of Air termination, single pointed copper rod 12mm dia and 300mm long complete all as specified and directed. |
| 2 | Disconnecting and taking out unserviceable Test point terminal block and supply and fix Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed. |
| 3 | Disconnecting and taking out damaged existing any type strip and S&F of copper strip 20 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed. |
| 4 | Supply & installation in replacement of Jef Ecosafe Maintenance free and Environment Friendly Earth Electrode set comprising of 17.2mm dia 3 mrs long rod of Low carbon steel, molecular Copper Bonded for a thickness of 250 microns, highly conductive ANSI NSF STD 60 Certified, with 1Bags(50P) of environment friendly carbon based backfill compound, according to BS 7430 & IEEE 80 and with suitable Clamp in 100mm dia bore hole complete all as specified and directed by Engineer-in-Charge. |
| 5 | S&F in replacement of advanced latest elevator telecommunication system and parking instruments as approved by GE including travelling cable of suitable size and length and Handset (03 Nos) in Car, at Ground floor and at Meter room for lifts. The job include all fitting / fixing of handset arrangement inside car, at Ground floor and at Lift panel room all as specified and directed |
| 6 | S&F Mirror polished italian marbel15-20 mm thickness in one piece as approved by GE complete all as specified and directed by Engineer-in-Charge. |
| 7 | M&L for complete calibration of 13 Passanger lift including governor etc. through Govt certified agency in presence of user as per latested norms, policies etc. complete all as specified and directed. Note:-Calibration report of Govt certified agency to be submitted by contractor to GE office after completion of calibration. |
| 8 | M&L for complete calibration of 08 Passanger lift including governor etc. through Govt certified agency in presence of user as per latested norms, policies etc. complete all as specified and directed. Note:-Calibration report of Govt certified agency to be submitted by contractor to GE office after completion of calibration. |
| 9 | Complete removal of paint from Lift Machine, car, Gear box, panel etc. by paint remover or any other method and applying a coat of redoxide primer and 02 coats of synthetic enamel paint on both side of Lift Machine, car and Gear box, main traction pulley, I section beams, Panel etc., colour as approved by the user for 13 Passanger lifts complete all as specified and directed. |
| 10 | Complete removal of paint from Lift Machine, car, Gear box, panel etc. by paint remover or any other method and applying a coat of redoxide primer and 02 coats of synthetic enamel paint on both side of Lift Machine, car and Gear box, main traction pulley, I section beams, Panel etc., colour as approved by the user for 08 Passanger lifts complete all as specified and directed. |
| 11 | Taking out old cables of any sizes from duct/trench/floor by opening all incoming and outgoing connections and deposited in MES store yard complete all as specified and directed by Engineer in charge. |
| 12 | S&F of LT Power Cable copper armoured 25 sqmm 3.5 core 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments complete all as specified and directed by Engineer in charge. |
| 13 | S&F of LT Power Cable copper armoured 35 sqmm 3.5 core 650 V/1100 V Grade as per IS 7098 (Part 1988 with upto Date Amendments complete all as specified and directed by Engineer in charge. |
| 14 | S&F of LT Power Cable copper armoured 50 sqmm 3.5 core 650 V/1100 V Grade as per IS 7098 (Part 1988 with upto Date Amendments complete all as specified and directed by Engineer in charge. |
