Tender Forsupply, Installation , Testing And Commissioning (Sitc) Of Fire-Fighting Components Located At The Cotton Corporation Of India Ltd. Kapas Bhavan,S.C.O.-7To11,New Housing Board, Barnala Road , Sirsa (Hr) 1. Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump). No. 01 (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS:1520 b) Suitable HP squirrel cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS-325. (Terrace Pump 900 LPM at 35m Head. As per approved plan) (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti-vibration pads. Make :-PUMP-KIRLOSKAR/CROMPTOM/LUBI/TEXMO 2. Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS3589/IS1239 including Welding, fittings like elbows, tees, flanges, tapers ,nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. Make: JINDAL/TATA/RAVINDRA/SURYA 2.1 25 mm dia. Rmt. 60 2.2 50 mm dia. Rmt. 30 2.3 80 mm dia. Rmt. 12 2.4 100 mm dia. 3. Supplying and fixing single headed internal hydrant valve with in stantaneous Gunmetal/Coupling of 63 mm dia. with cast iron wheel ISI marked conforming to IS5290 (Type-A) with blank Gunmetal/cap and chain as required. Nos. 06 Make:-MINIMAX/SUPREMEX/LIFE GUARD/NEWAGE/ OMEX 4. Supplying, fixing, testing and commissioning of butterfly valve of PN1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS13095 of following sizes as required. Make: KARTAR/SIR/ZOLOTO/SANT 4.1 80 mm dia. Nos. 02 4.2 100 mm dia. Nos. 04 5. Providing, installation, testing and commission in guenon-return valve of following sizes confirming to IS: 5312 complete with rubber gas ket, GI bolts, nuts, washers etc. as required. Make: KARTAR/SIR/ZOLOTO/SANT 5.1 80 mm dia. Nos. 01 5.2 100 mm dia. Nos. 01 6. Supplying and fixing 63 mm dia,15 MTR hose pipe with 63 mm dia. gun metal male and female couplings duly bound with GI wire, rivets etc. conforming to IS636 ( type-A) as required. Nos. 06 Make:-MINIMAX/SUPREX/LIFE GUARD/NEWAGE/ OMEX 7. Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS884 complete with the following as required. 20 mm nominal internal dia water hose thermo plastic (Textile reinforced)type-2 as per IS:1258520 mm nominal internal dia gunmetal globe valve & nozzle. Drum and brackets for fixing the equipment’s on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. Make:-MINIMAX/SUPREX/LIFE GUARD/NEWAGE/ OMEX 30 mm Nos. 06 8. Supplying &fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal dia meter size nozzle conforming to IS903 suitable for instantaneous connection to inter connect hose pipe coupling as required. Make:-MINIMAX/SUPREX/LIFE GUARD/NEWAGE/ OMEX Gunmetal Nos. 06 9. Supplying and fixing of fire brigade connection of cast-iron body with gun metal male in stagnate us inlet couplings complete with cap and chain as reqd. for suitable dia Ms pipe connection conforming to IS 904 as required. Make:-MINIMAX/SUPREX/PADMINI/NEW AGE/OMEX No. 01 10. Providing & fixing of pressures witch in M.S. pipe line including connection etc.as required. No. 01 11. Providing & fixing flow switch in following sizes M.S.pipe including connection etc. as required. 12. Providing and fixing S.S. Pressure Gauge complete as required complete in all respect. Dialdiameter100 mm calibration 0-16 Kg No. 01 13. Supplying,Installation,Testing and Commissioning of weather proof cabinet for hose fabricated out of 1.6mm thickness M.S. sheet with front glass door having locking arrangement, suitable to accommodate all the necessary pipes, accessories, fittings etc including painting the metal portion with one coat of ready mixed primer paint and two coats of synthetic enamel paint of approved hade and quality, sign writing etc. 900 mm wide x 600 mm high x 500 mm deep Size (for Yard Hydrant ) Nos. 06 14. Supply and fixing of 4 kg ABC type fire extinguisher as per IS: 15683 (4kg.) including cost of petty material required to complete the work up to the entire satisfaction of Engineer In Charge. Make: MINIMAX/SUPREX/LIFE GUARD/NEWAGE/OMEX 4 Kg .Capacity Nos. 15 15. Supply and fixing of 4.5 kg C02 gas type fire extinguisher as per IS:15683(4.5kg.) with including cost of petty material required to complete the work up to the entire satisfaction of Engineer In Charge. Make:- MINIMAX/SUPREX/LIFE GUARD/NEWAGE/OMEX 4.5 Kg. Capacity Nos. 15 16. Supply. Installation, Testing and Commissioning of Ball Valve 25 mm dia. with including cost of petty material required to complete the work up to the entire satisfaction of Engineer In Charge. Make:-CIM/LEADER/AIP/SANT/ZOLOTO/Kartar Nos. 10 17. Providing and fixing of Fire sprinkler bulb , Make:- (MINIMAX/SUPREX/LIFE GUARD/NEWAGE/OMEX) Nos. 50 18. Providing and fixing of Fire Motor starter ,Make:- (Bentex/L&T)with cable from pump to starter. No. 01 19. Providing and fixing of MCP ,Make:- MINIMAX/SUPREX/LIFE GUARD/NEWAGE/OMEX with cable from pump to starter
