|
| 1 | Providing and placingoffice chair with following specification: SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 ±0.1cm. thick hot-pressed plywood measured. upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. HIGH BACK SIZE 47.5 cm. (W) x 69.5 cm. (H) / SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.ARMRESTS: The one-piece armrests are injection moulded from black Co-polymer Polypropylene.CENTER TILT SYNCHRO MECHANISM : The mechanism is designed with the following features: · 360° revolving type. · Upight position locking · Tilt tension adjustmen. ·Seat/back tilting ratio of1:3.TUBULAR FRAME : The powder coated ( DFT 40-60 microns ) tubular frame is cantilever type & made of Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. ER.W. Tube.PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm.TELESCOPIC BELLOW ASSEMBLY : The bellow is 3-piece telescopic type and injection moulded in black Polypropylene.PEDESTAL ASSEMBLY : The pedestal is injection moulded in black 33%glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.3 ±0.5cm. pitch-centre dia. (76.3 ±1.0cm with castors).TWIN WHEEL CASTORS (FOR 9U01RG/9U02RG): The twin wheel castors are injection moulded in Black Nylon as per order. |
| 2 | Providing and placingoffice chair with following specification: SEAT/BACK A SSEMBLY:SEAT/BACK A SSEMBLY: The seat is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured.The Back is made up of injection mou1ded glass filled nylon & upholstered using Mesh fabric with high tenacity yarn.* SEAT SIZE(Larger Seat Depth) : 47.0 cm. (W) x 51.5 cm (D)* BACK SIZE : 45.0 cm. (W) x 65.3 cm. (H)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° and hardness 16 ± 2 kgf as per IS:7888 for 25% compression.ARMRESTS : The adjustable armrest is designed with the following features :• Up-Down adjustment- 8 steps (8 0±0.Scm range)• Height adjustable armrest structure which is Powder Coated & fitted with an armrest top.• Fixed Armrest Top is PU moulded over metal insert.LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric.The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pa6. Lumbar pad has an adjustment of 8.0 ± 0.5 cm in height.FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features.• 360° revolving type.• Single point control.• Front-pivot for tilt with feet resting on ground ensuring more comfort.• Tilt tension adjustment.• 4-position locking with anti-shock feature.• Seat/back tilting ratio of 1:2.PNEUMATIC HEiGHT ADJUSTMENT. The pneumatic height adjustment has an adjustment stroke oi 10.0 ± 0.3 cn°.Pedestal Assembly : the pedestal is injection moulded in black 30% glass filled nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch center dia is 66.1± 0.5 cm.TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon as per order. |
| 3 | Providing and placingoffice chair for cabin with following specification: SEAT/BACK ASSEMBLY: The seat is made up of 1.2 ± 0 1cm thk. hot pressed plywood measured.The Back is made up of injection mould d glass filled nylon & upholstered using Quitted Leatherette fabricSEAT SIZE(Larger Seat Depth) : 47.0 cm (W) x 51.5 cm (D) BACK SIZE : 45.0 cm. (W) x 65.3 cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° and hardness 16 ± 2 kgf as per IS:7888 for 25% compressionARMRESTS : The adjustable armrest is designed with the following features• Up-Down adjustment- 8 steps (8.0±0.Scm range)• Height adjustable armrest structure which is Chrome plated & fitted with an armrest top.•Fixed Armrest Top is PU moulded over metal insert.LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumbar pad has an adjustment of 8.0 ± 0.5 cm in height.FRONT PIVOT SYNCHRO MECHANISM: The adjU5 td ble tilting mechanism is designed with the following features.• 360° revolving type.• Single point control.• Front-pivot for tilt with feet resting on ground ensuring more comfort.• Tilt tension adjustment• 4-position locking with anti-shocK feature.• Seat/back tilting ratio of 1.2Pneumatic Height Adjustment : The pneumatic height adjustment has adjustment strokeof 10.0±0.3PEDESTAL ASSEMBLY : The pedestal is fabricated from 0.2 ± 0.02 cm thick HR sheet, chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. The pedesta! is 66.0+0 Scm. Pitch-center dia. (76.0±1.0 cm with castors).TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon as per order. |
| 4 | Providing and placing suitable headrest for office chair for cabin(Item no.3) as per specification. |
| 5 | Providing and placingoffice table for P.C with following specification: TABLE MATERIAL - The Table Panels are made from 18 ±0.5mm thk Pre-LaminatedExterior grade PLT ( Grade I,Type-II )(IS 12823) with PVC edgebanding on all sides. Drawer bottom panels are made up of 9mm thick (±1mm). Pre-laminated Particle Board. Locking has been provided on top drawer only. CONSTRUCTION - Table has provision of CPU monitor, Drawer and Sliding KBPT.The Table has a knock-down construction as per order. |
| 6 | Providing and placingoffice table with following specification: Table size shall be1365Widthx 680Depthx 735Height . The top panels shall be made from 18 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides . Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall be dia. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube .Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). The Storage shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mmthick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS . Also there should be 10 lever cam lock plus handles built in plastic as per order. |
| 7 | Providing and placingoffice table with following specification:Table size shall be1199Widthx 590 Depthx 735Height . The top panels shall be made from 18 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides . Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall be dia. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube .Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). The Storage shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mmthick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS . Also there should be 10 lever cam lock plus handles built in plastic as per order. |
| 8 | Providing and placing Free standing pedestal with following specification:1)Drawer Configuration/ Product size/ Styling:- op support Pedestal for 646ht x 390w x 435d.Bee-Box-file Top support Pedestal for VURY Box-Box-file Over closing Including Leveler. Drewer Inside Clear Box Drewer Space for 390x590d Pedestal 315(w) x 530(d) x se(h) File Drawer -315(w) x 530(d) x 247()2)Construction & Material:- Welded Assembled 0.8th CRCA for Body Shell, Side Suffers and Bottom panel 12th CRCA for top and Bottom Suffer. 0.6th CRCA for Drawer Front.0.5th CRCA for Drawer Side-Bottom-Side and Grower Bock CRCA D grade sheet as per 15-5133) Drawer Fronts:- Metal Front Straight Edge.4) Drawer Specification:-All Dowers with Double extension precision ball side 300 wide Pedestals File drawer Suitable for Storing Full case Godrej Ezee & Viso files in depth wise manner A4 files in Widthwise Monner. no\"s of fee hanger provided in file drawer. For Drawer Pulling, Sidewise tapered recess provided in Shell behind the Drawer Fronts. 5) Locking:- Cam Lock & Central locking with actuator & lock channel mechanism for Box-Box-File Pedestal.6) Top Panel:- Metol straight Edge Top 7) Leveler:- Plastic MB leveler mounted below Body Shell. 8) Portion in Drawer;- Optional Accessory for Box drawer 9). Plastic Pencil tray : Optional Accessory10) Application/ Mounting Environment:- For fixing the worktop of Vu.11) Finish:- Epoxy Polyester Powder Coated to the thickness of 50 microns (10) as per order. |
| 9 | Providing and placing free standing cabinet with following specification:Overall size- :1050W X 1219HX 450 DBody : Body is made from 18mm PLB with all the edges sealed with 0.8 mmthick PVC Edgeband. The Back panel is 9mm White PLT. The entire constructionis ready to assemble unit and is assembled with suitable KD fittings.The shelves and separator panels ( if available ) is made from 18 mm white PLTand edges are sealed with 0.8 mm edge band. The bottom shelf is fixed andother shelves have one step adjustment for optimizing the space.Doors : Door Panels ae made from 18 mm PLB with 2 mm Edge band on alledges ad a flush Plastic handle is fitted vertically at the center of the door. Thehinge door has suitable hinges and HDU is fitted with an adjustable fitting forheight adjustment. The HDU runs in a PVC track mounted on the TOP andBottom panel of the Body. HDU has a three point lock and HDU has a push type lock.All the storages are fitted with a 6 mm leveler at bottom for leveling as per order. |
| 10 | Providing and placing Drawer filing cabinets with following specification:Vertical Filing Cabinets whcih use less floor space. Size of 4 Drawer VFC shall be 1320mm(H) X 470mm(W) X 620mm(D). All the components shall be made of CRCA . It should have 1 Point Locking Mechanism and a Rigid Knock Down Construction. The Top, Side & Drawer Front thickness should be 0.7mm. The Frames, Drawer-inside cover and Side Back Side thickness should be 0.6mm. The Back, Bottom and Drawer thickness should be 0.5mm. Easy to grip Full length Recess Handle shall be integrated into Metal Drawer for easy pull out convenience. There shall be a Snap on type plastic label holder on Drawer Fronts. In addition, 28 ‘Ezee’ / ‘Visa’ files (Foolscap) from front to back of thickness 20mm per drawer can be hanged in VFC. The Centralized locking System shall be provided alongwith Shooting Bolt Mechanism and 10 Lever Cam Lock. The VFC should have anti-tipping arrangement which ensures that when one drawer is opened for use, it does not allow other drawers to be opened. The High Quality Precision Ball Slide shall be provided with Drawer Load capacity of max 40 kg and UDL for 75,000 cycles (BS). Plain Triangular plate pop should be riveted at the bottom corners for rigidity. Optional Accessories like Drawer Partition and Cradle for hanging A4 file folders front to back should also be available. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10) as per order. |
| 11 | Providing and placing Cupboard with following specification:Overall Size (W x H x D): Main Unit: 1000 X 1980 X 550 Height is excluding leveler Net weight: 98 kg 1. Body: a] Aesthetically appealing plain, made from CRCA 0.8 mm. b] Hanging rod made of 1.0 mm thk MS ERW oblong tube having chrome plating & nickel plating. c] M10 screw type leveler with hex plastic base. 2. Construction: Welded outer shell including hinges and ovedrriding shutters. 3. Finish: All MS sheetmetal and metal frame components are powder coated with epoxy polyester powder to the thickness of 50 microns (±10 microns). Shutters having option of MS sheet and Precoated sheet. 4. Hardware: ·· Main shutter lock: 3 way 9 wafers barrel lock with wave type key, integrated with the handle. ·· Drawers: 4 digit numeric lock with cam stopper, integrated drawer pull and lock knob. ·· Hinges for skirting: Spring loaded self closing type with easy snap on fixing. ·· Bumpers for doors & drawer, screw and washer for fixing shelf. ·· Shelf supports for fixing shelfs as per order. |
| 12 | Providing and placing Overhead unit with following specification: Dimensions (in cm) - Width - 90. Depth - 50.7. Height - 260. Primary Material - CRCA Steel. Finish Color - Royal Ivory. Net Weight (kg) - 75.7. Number of Shelves - 4. Style - Contemporary & Modern. Warranty - 1 Year as per order. |
| 13 | Providing and placing Cupboard for files with following specification:Overall size of916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available as per order. |
| 14 | Providing and placing Classic Office Chair with following specification:SEAT/BACK ASSEMBLY: The seat and back should bemade from seasoned wood and plywood. The same should beupholstered with black synthetic leather and polyurethane foam. BACK SIZE: 46.0cm. (W) X 27.0cm. (H) SEAT SIZE: 46.0cm. (W) X 40.0cm. (D)ARMREST TUBE: The armrest tube should bemade of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and powder coated (DFT 40-60 microns).UNDERSTRUCTURE ASSEMBLY: The understructure assembly should bea cantilever type frame made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and powder coated (DFT 40-60 microns).Overall Dimensions of Chair -Seat Height - 48.0 cm.Height - 87.5cm.Width & Depth of Chair as measured from base - Width-58.0 cm and Depth-56.5 cm as per order. |
| 15 | Providing and placing Metal Shelving Rack with following specification:Depth 400 mm Width 900 mm Height 1875 mm, Powder coated paint, open shelve type, with 5 compartments confirming to IS code 1883 latest and other details as per Technical specifications. |
| 16 | Providing and placing Metal Shelving Rack with following specification:Depth 300 mm Width 700 mm Height 975 mm, Powder coated paint, open shelve type, with 2 compartments confirming to IS code 1883 latest and other details as per Technical specifications. |
| 17 | Providing and placing Visitor Office Chair with following specification:1)SEAT/BACK ASSEMBLY: The seat and back should bemade from 1.0±0.1cm. thk. hot pressed moshould be ture resistant tant.commercial plywood and upholstered with P.U. foam and fabric. BACK SIZE: 42.0cm. (W) X 26.5cm. (H)SEAT SIZE: 42.0cm. (W) X 42.0cm. (D) 2)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should bemoulded with density =45+1-2 kg/m3 and Hardness load 16 ± 2 kgffor 25% compression. 3)UNDERSTRUCTURE ASSEMBLY: The understructure assembly should bea cantilever type mainframe made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and black powder coated--( DFT 40-60 microns ) Back: (W)42.0 cm x (H)26.5cm,Seat :(W)42.0cm x (D) 42.0cmOverall Dimensions of Chair Seat Height - 45.5 cm.Height - 78.5cm.Width & Depth of Chair as measured from base - Width-52.0cm and Depth-60.5 cm as per order. |
| 18 | Rates quoted by Contractor for each item should be inclusive of GST |
