Tender For Repair/Renovation To The Shed No. P/200 For Body Armour Shop In Inside Factory At Ocf Avadi
Tender Value
44.97 Lakhs
Estimated cost
Bid Submission
23 Feb 2024
0 days left
EMD
89954
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
avadi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair / Renovation To The Shed No. P / 200 For Body Armour Shop In Inside Factory At Ocf Avadi
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Asbestos cement sheet, including ridges&surrender to CE stores |
| 2 | Demolition of tiles of any description or thickness in floors, aprons etc.laid ,bedded and pointed |
| 3 | Dismantling of structuralsteel workincluding doors, gatesbut excluding framed truss etc and surrender to CE stores |
| 4 | Demolition of brick work built in cement mortar |
| 5 | S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connectedto common rafters and running rails andguidesfor sliding doors; fixedwithangle cleats or other connecting plates. Fe410-wGdeE-250)qualityA- |
| 6 | S & FPre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strengthof 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 7 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 8 | Dismantling ofPlain or corrugated steel / galvalume sheeting, gutters any gauge, thickness,includingNainital orsimilarpatternroof coverings including removal & return to stores. |
| 9 | S & F of Plain, Aluminium sheeting design as per theexisting gutters,Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing & bending thickness 0.71mm (length and girth as fixed) |
| 10 | M & L for preparing of OLDsurfaces with Two coat synthetic enamel on steel surfaces of any description, over 10cm in width or girth,not otherwise described |
| 11 | M&L for preparation old surfaces and applyingtwo coat of plastic emulsion on previously painted surface |
| 12 | M & L for cement concrete in foundation type- D2, withMix 1:4:8using40mm aggregate. |
| 13 | Matrial and labour for Cement concretework using M-15 mix 1:2:4with 20 mm graded aggregate |
| 14 | M & LBrickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m meanradius built in cement mortar 1:4 |
| 15 | Material & Labour for rendering 20mm thickness onbrick work with usingcement mortar 1:4 |
| 16 | M & L for preparing of NEWsurfaces with one coat primer Two coat synthetic enamel on steel surfaces of any description, over 10cm in width or girth,not otherwise described |
| 17 | S & F of Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of erected in position as indicated, complete: gear operatedprimer; type withbevelgear box and crank handle with thickness of lath 1.25mm |
| 18 | S & F of Ball bearing for rolling shutters |
| 19 | S & F Safety lever locks mild steel with 4 levers forrolling shutters |
| 20 | S & F Anodised aluminium frame for partitions,doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 21 | S & F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 22 | S & FAnodised aluminium window andventilator shutters, Expansion hold fasteners 12.5mm dia,weighing 0.55 kg/m including necessary joiningcleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 23 | S & F Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane (4mm) thickness |
| 24 | S & F solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers |
| 25 | M&L for 9 mm thick prelaminatedparticle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work. |
| 26 | Floor door stopper 150 mmof aluminium alloy body and tongue, anodised,with harddrawn steel spring, fixed in floor. |
| 27 | Supply & fixing of Aluminium4 levers Mortice lock, vertical type, size 75 mm |
| 28 | S& F of Aluminium Door closer hydraulically regulated, designation No.3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80kg and fixed |
| 29 | Forming jambs for windows with cement mortar 1:4 to openings including cutting, toothing and properly bonding into old work, also facing,jointing and pointing to match existing work, complete. |
| 30 | S & F of tubes medium grade, bore in tube 40mm fixed complete to walls and ceilings |
| 31 | S & F Anodised aluminium snap grid frame work for false ceiling all , Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mmlong and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 32 | M&L for fixingNonasbestos fibre cement building boards 4mm thick fixed to GI/Aluminium framework with staples on snap grid fixed in ceiling |
| 33 | M & L for roughening surfaces of old concrete floor by hacking, picking, sweeping clean and washing down |
| 34 | M&L for laying of screed bed/bedding layer of20mm thick using CM 1:6 mix for laying vitrified tiles |
| 35 | Supply &fixing of vitrifiedtiles light shade 10mm thick(square/rectangular) polished area of each tiles notexceeding 0.36sqm,in floors , skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 36 | M & Lfor Nonasbestos fibre cement building thickness 8mm boards fixed or laid/ inserted to GI Frame work with screws or suitable material |
| 37 | Supply & fixing of 2mm thick Poly Corbonated Profile embossedtransparent clear sheet suitable profile matching withGalvalume sheet (make:Tata Blue Scope /Sathyam/Zindal) fixed in roof and cladding with with necessary hex selftapping screws fittings and all as directed by EIC .make : Lexan/Everest/Sun Tuf/Duro Tuff |
| 38 | Supply & installation of high performance industrial Multi Roof Vent of 500mm dia neck of aluminium alloy to wind speed of 200Kg per hour and to the entry of wind driven rain range of 2.50 L per second inclusive of base plate and all necessary scaffolding and safety aspects complete with all fittings as directed by EIC. (Make: Star vent Turbo Vent, Air Vent, TATASun Green Ventilator) |
| 39 | Cutting the existing Galvalum Sheet roof for 500mm dia to match with Air Vent |
| 40 | Supply & providing Compression/crimping type end termination for 3 1/2 x 10/25/50/120Sqmm cable/conductors with suitable glands and lugs |
| 41 | Supply and laying armouredHeavy Duty PVC insulated cable aluminium conductor served with an ineer sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 120Sq.mm 3 1/2 core Make:universal,Finolex and Havells,polycab |
| 42 | Supply and laying armouredHeavy Duty PVC insulated cable aluminium conductor served with an ineer sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 25Sq.mm 3 1/2 core Make:universal,Finolex and Havells,polycab |
| 43 | Supply and laying armouredHeavy Duty PVC insulated cable aluminium conductor served with an ineer sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10Sq.mm 4 core Make:universal,Finolex and Havells,polycab |
| 44 | Supply & providing point wring with copper conductor cable 1.5 Sqmm size PVC insulated cable in stove enamelled steel conduit on non concealedwiring including material & labour with 14 SWG bare copper wirefor earthing Make: Finolex,National,Orbit |
| 45 | Supply & fixing of switch piano flush type single pole one way 6 amps Make: Anchor penta type ,Oswal |
| 46 | Supply & fixing of pressed steel terminal boxe 200 x 250mm x 50mm deep |
| 47 | Supply & fixing of pressed steel terminal boxe 175 x 100 x 50 mm deep |
| 48 | Supply & providing switch cumsocket combinationtwo in one6A flush type (Make :-Anchor/Oswal/ |
| 49 | Supply & providing switch cumsocket combinationtwo in one5 in 1,6/16A flush type (Make :-Anchor/Oswal/ |
| 50 | Supply & fixing of ceiling rose surface bakelite 65 x 50mm three terminal Make: Anchor /Oswal |
| 51 | Supply & providing power wiring in Copper.conductor cable 2x4.0Sqmm+1x4.0 Sqmm earthwire size PVC insulated cable in 1\" steel conduit on non concealedwiring including material & labourMake: Finolex,Havell\"s |
| 52 | Supply & providing power wiring in Copper.conductor cable 2x2.5Sqmm+1x2.5 Sqmm earthwire size PVC insulated cable in 1\" steel conduit on non concealedwiring including material & labourMake: Finolex ,Havell\"s |
| 53 | Supply & Fixing of LED lights fitting 1 x 18/20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 54 | Supply & fixing of sheet metal enclosure for MCB DBTriple pole & netural 04 way double door 415V Make:Schneider,Legrand |
| 55 | Supply & fixing of triple pole & neutral MCB/isolator 80A ,415V ,Make:L&T,Legrand ,Havell\"s,Seimens |
| 56 | Supply & fixing of triple pole MCB/isolator 40A ,415Vwith MS enclosure ,Make:L&T,Legrand ,Havell\"s,Seimens |
| 57 | Supply & fixing of single pole MCB/isolator 10A-04Nos ,20A-04 & 32A-04Nos 230V ,Make:L&T,Legrand ,Havell\"s,Seimens(0-40A |
| 58 | Supply & fixing of MCCB 125A ,415V 4 pole 16KA with MS powder coated Enclsuore Make Schneider,L&T Legrand |
| 59 | Supply & Fixing of BLDC Ceiling fan 1400Sweep ,230V,1 single phase with all accessories inclsuig down rod of 5 feet |
| 60 | Supply & Fixing of Heavy Duty Wall mounting aircirculator fan 30 inch(750mm) , 3 blades 3 phase,440V, 900RPM,with sound level70-75DB with complete protection with close mesh guard.Make :Almonard,Crompton ,Usha |
| 61 | Supply & Fixing of High bay LED 170W fittingoperating at 40-270V , with rated luminous effacacy of 150 lumen/w , 5700K, with all complete accessoriesincluding drivers and fixing arrangements.Make:Philips model No.BY515P LED250S 57 NB PSU GR , Havells, |
| 62 | Supply & fixing of Indoor LT cubical panel 12 SWG CRCA sheet powdered coated, 400A Al.busbar insulated with 400 A ACB -1No. for incomer&200A MCCB with handle -03Nos ,125A MCCB with handle -03Nos ,63A MCCB with handle -02Nos for outgoing with Digital metering panel consisting of Voltmeter, Ammeter & multifunctional meterfor monitoring of KWH,P.F,Current ,Voltage ,KVA,Tripping system & Earth fault Relay including single phase preventerACB Make :L&T,schneider & GE Model .Entelliguard with Micro processor based release ,O/L,S/C ,E/F,Make ofMCCB : Siemens/ L&T, Make of Measuring Instrument: AE / Krycard/ LT/Schneider |
AI Tender Summary
Tender Timeline
Feb 03, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 23, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 24, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender