Tender For 8 Liners 33382474 00010 00010 300066130 LINER,BOS ENTRY,DRG:61087/A Technical Details Name : Pankaj Agravat Contact : Email : pankaj.agravat@amns.in 12 NO LINER TYPE: RR B UP BOS ,ENTRY ADDITIONAL INFORMATION: DRAWING NO - 61087/A-REV-1 Item Details : Vendor has to submit following reports whichever applicaple as per Drawing: - Dimensional Inspection report - Material test certificate (Chemical <(>&<)> mechanical both) - NDT Report (UT , DP,) - Heat treatment report <(>&<)> Graph ( wherever Applicable) - Hardness test report. - Impact test report. 1.Material should be as per PR text. Material require as per PO only any deviation in the supply PO shall lead for rejection of the materials. 2.If any changes in nomecluter of part number changes or update, Should inform before dispatch materials. 3.AMNSI material code and PO number must be mentioned in all Test reports and Invoice. 4,Fitment, Hydraulic Test reports and performance warranty required. 5,In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6,In case of any query vendor should discuss or may visit the site for technical discussion before submitting offer. 7,Materials should be as per given standard,class,grade,rating. Item Note : 2 33382474 00020 00020 300062172 LINER,BOS EXIT,DRG:61088/A Technical Details Name : Pankaj Agravat Contact : Email : pankaj.agravat@amns.in 12 NO LINER TYPE: RR B UP BOS ,EXIT ADDITIONAL INFORMATION: DRAWING NO - 61088/A-REV-1 Item Details : Vendor has to submit following reports whichever applicaple as per Drawing: - Dimensional Inspection report - Material test certificate (Chemical <(>&<)> mechanical both) - NDT Report (UT , DP,) - Heat treatment report <(>&<)> Graph ( wherever Applicable) - Hardness test report. - Impact test report. 1.Material should be as per PR text. Material require as per PO only any deviation in the supply PO shall lead for rejection of the materials. 2.If any changes in nomecluter of part number changes or update, Should inform before dispatch materials. 3.AMNSI material code and PO number must be mentioned in all Test reports and Invoice. 4,Fitment, Hydraulic Test reports and performance warranty required. 5,In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6,In case of any query vendor should discuss or may visit the site for technical discussion before submitting offer. 7,Materials should be as per given standard,class,grade,rating. For any kind of query related with Drawing, Item Note : 3 33382474 00030 00030 300068099 LINER,BDS ENTRY,DRG:61089/A Technical Details Name : Pankaj Agravat Contact : Email : pankaj.agravat@amns.in 12 NO LINER TYPE: RR B UP BDS ,ENTRY ADDITIONAL INFORMATION: DRAWING NO - 61089/A-REV-1 Item Details : Vendor has to submit following reports whichever applicaple as per Drawing: - Dimensional Inspection report - Material test certificate (Chemical <(>&<)> mechanical both) - NDT Report (UT , DP,) - Heat treatment report <(>&<)> Graph ( wherever Applicable) - Hardness test report. - Impact test report. 1.Material should be as per PR text. Material require as per PO only any deviation in the supply PO shall lead for rejection of the materials. 2.If any changes in nomecluter of part number changes or update, Should inform before dispatch materials. 3.AMNSI material code and PO number must be mentioned in all Test reports and Invoice. 4,Fitment, Hydraulic Test reports and performance warranty required. 5,In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6,In case of any query vendor should discuss or may visit the site for technical discussion before submitting offer. 7,Materials should be as per given standard,class,grade,rating. For any kind of query related with Drawing, Item Note : 4 33382474 00040 00040 300062173 LINER,BDS EXIT,DRG:61090/A Technical Details Name : Pankaj Agravat Contact : Email : pankaj.agravat@amns.in 12 NO LINER TYPE: RR B UP BDS ,EXIT ADDITIONAL INFORMATION: DRAWING NO - 61090/A-REV-1 Item Details : Vendor has to submit following reports whichever applicaple as per Drawing: - Dimensional Inspection report - Material test certificate (Chemical <(>&<)> mechanical both) - NDT Report (UT , DP,) - Heat treatment report <(>&<)> Graph ( wherever Applicable) - Hardness test report. - Impact test report. 1.Material should be as per PR text. Material require as per PO only any deviation in the supply PO shall lead for rejection of the materials. 2.If any changes in nomecluter of part number changes or update, Should inform before dispatch materials. 3.AMNSI material code and PO number must be mentioned in all Test reports and Invoice. 4,Fitment, Hydraulic Test reports and performance warranty required. 5,In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6,In case of any query vendor should discuss or may visit the site for technical discussion before submitting offer. 7,Materials should be as per given standard,class,grade,rating. Item Note : 5 33382474 00050 00050 300066117 LINER,BOT ENTRY,DRG:61035/A Technical Details Name : Pankaj Agravat Contact : Email : pankaj.agravat@amns.in 25 NO LINER TYPE: RR WR, BOT ,ENTRY ADDITIONAL INFORMATION: DRAWING NO - 61035/A-REV-2 Item Details : Vendor has to submit following reports whichever applicaple as per Drawing: - Dimensional Inspection report - Material test certificate (Chemical <(>&<)> mechanical both) - NDT Report (UT , DP,) - Heat treatment report <(>&<)> Graph ( wherever Applicable) - Hardness test report. - Impact test report. 1.Material should be as per PR text. Material require as per PO only any deviation in the supply PO shall lead for rejection of the materials. 2.If any changes in nomecluter of part number changes or update, Should inform before dispatch materials. 3.AMNSI material code and PO number must be mentioned in all Test reports and Invoice. 4,Fitment, Hydraulic Test reports and performance warranty required. 5,In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6,In case of any query vendor should discuss or may visit the site for technical discussion before submitting offer. 7,Materials should be as per given standard,class,grade,rating. Item Note : 6 33382474 00060 00060 300068085 LINER,BOT EXIT,DRG:61035/B Technical Details Name : Pankaj Agravat Contact : Email : pankaj.agravat@amns.in 25 NO LINER TYPE: RR WR, BOT ,EXIT ADDITIONAL INFORMATION: DRAWING NO - 61035/B-REV-2 Item Details : Vendor has to submit following reports whichever applicaple as per Drawing: - Dimensional Inspection report - Material test certificate (Chemical <(>&<)> mechanical both) - NDT Report (UT , DP,) - Heat treatment report <(>&<)> Graph ( wherever Applicable) - Hardness test report. - Impact test report. 1.Material should be as per PR text. Material require as per PO only any deviation in the supply PO shall lead for rejection of the materials. 2.If any changes in nomecluter of part number changes or update, Should inform before dispatch materials. 3.AMNSI material code and PO number must be mentioned in all Test reports and Invoice. 4,Fitment, Hydraulic Test reports and performance warranty required. 5,In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6,In case of any query vendor should discuss or may visit the site for technical discussion before submitting offer. 7,Materials should be as per given standard,class,grade,rating. Item Note : 7 33382474 00070 00070 300068086 LINER,TOP ENTRY,DRG:61035/C Technical Details Name : Pankaj Agravat Contact : Email : pankaj.agravat@amns.in 25 NO LINER TYPE: RR WR, TOP ,ENTRY ADDITIONAL INFORMATION: DRAWING NO - 61035/C-REV-2 Item Details : Vendor has to submit following reports whichever applicaple as per Drawing: - Dimensional Inspection report - Material test certificate (Chemical <(>&<)> mechanical both) - NDT Report (UT , DP,) - Heat treatment report <(>&<)> Graph ( wherever Applicable) - Hardness test report. - Impact test report. 1.Material should be as per PR text. Material require as per PO only any deviation in the supply PO shall lead for rejection of the materials. 2.If any changes in nomecluter of part number changes or update, Should inform before dispatch materials. 3.AMNSI material code and PO number must be mentioned in all Test reports and Invoice. 4,Fitment, Hydraulic Test reports and performance warranty required. 5,In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6,In case of any query vendor should discuss or may visit the site for technical discussion before submitting offer. 7,Materials should be as per given standard,class,grade,rating. Item Note : 8 33382474 00080 00080 300066118 LINER,TOP EXIT,DRG:61035/D Technical Details Name : Pankaj Agravat Contact : Email : pankaj.agravat@amns.in 25 NO LINER TYPE: RR WR, TOP ,EXIT ADDITIONAL INFORMATION: DRAWING NO - 61035/D-REV-2 Item Details : Vendor has to submit following reports whichever applicaple as per Drawing: - Dimensional Inspection report - Material test certificate (Chemical <(>&<)> mechanical both) - NDT Report (UT , DP,) - Heat treatment report <(>&<)> Graph ( wherever Applicable) - Hardness test report. - Impact test report. 1.Material should be as per PR text. Material require as per PO only any deviation in the supply PO shall lead for rejection of the materials. 2.If any changes in nomecluter of part number changes or update, Should inform before dispatch materials. 3.AMNSI material code and PO number must be mentioned in all Test reports and Invoice. 4,Fitment, Hydraulic Test reports and performance warranty required. 5,In case of any failure or defect vendor to take care of necessary replacement at their own cost on immediate basis. 6,In case of any query vendor should discuss or may visit the site for technical discussion before submitting offer. 7,Materials should be as per given standard,class,grade,rating. Item Note
