Tender For 18 Apd Items 33388670 00010 00010 300288833 GDRT BRG BLOCK ASSEMBLY O/S,DRG:60179 Technical Details Name : Prajkta Salunkhe Contact : Email : PRAJKTA.SALUNKHE@AMNS.IN 20 SET APD NOMENCLATURE: GDRT BRG BLOCK ASSEMBLY O/S , DRAWING NUMBER: 60179,REV-B MAJOR ASSEMBLY: GDRT ROLLER ASSEMBLY , MAJOR ASSEMBLY DRAWING NO: 60282 ADDITIONAL INFORMATION: COMPLETE ASSEMBLY AS PER 60179/A--- 1NO,60179/B---1NO,60179/F---2NO,60179/G---1NO,60179/H---1NO,60179/J--1NO Item Details : 1.MATERIAL REQUIRED AS PER PO ONLY. ANY DEVIATION IN THE SUPPLY WRT PO SHALL LEAD FOR REJECTION OF THE MATERIAL. 2. DIMENSIONAL REPORT, MECHANICAL PROPERTIES, DP TEST REPORT (WHERE APPLICABLE), HARDNESS REPORT, UT REPORTS, ALL PHYSICAL TEST REPORTS TO BE SUBMITTED PRIOR TO DISPATCH. 3. VENDOR TO SUBMIT ALL INTERNAL INSPECTION REPORTS AND MOC AND PRESSURE TEST CERTIFICATES BEFORE DISPATCH OF THE MATERIAL AND TO ISSUE DCC FROM SITE. 4. FITMENT AND PERFORMANCE WARRANTY REQUIRE. 5.ALL TEST REPORTS ARE SUBJECTED TO APLLICABLE. 6.MTC must provided with dispatch document . Item Note : 2 33397033 00010 00020 300086206 ROUND ANCHOR NUT,DRG:60534/ITEM NO-H Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 60 NO APD, NOMENCLATURE : ROUND ANCHOR NUT, DRAWING NUMBER : 60534-ITEM NO: H,REV:D, MAJOR ASSEMBLY : RR N AND X TABLES, , MAJOR ASSEMBLY DRAWING NO : 60014, MAJOR ASSEMBLY MAKE : SMS Item Details : 1.MATERIAL REQUIRED AS PER PO ONLY. ANY DEVIATION IN THE SUPPLY WRT PO SHALL LEAD FOR REJECTION OF THE MATERIAL. 2. DIMENSIONAL REPORT, MECHANICAL PROPERTIES, DP TEST REPORT (WHERE APPLICABLE), HARDNESS REPORT, UT REPORTS, ALL PHYSICAL TEST REPORTS TO BE SUBMITTED PRIOR TO DISPATCH. 3. VENDOR TO SUBMIT ALL INTERNAL INSPECTION REPORTS AND MOC AND PRESSURE TEST CERTIFICATES BEFORE DISPATCH OF THE MATERIAL AND TO ISSUE DCC FROM SITE. 4. FITMENT AND PERFORMANCE WARRANTY REQUIRE. 5.ALL TEST REPORTS ARE SUBJECTED TO APLLICABLE. Item Note : 3 33397033 00020 00030 300078972 PIN BOLT,DRG NO:60534-B Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 60 NO APD NOMENCLATURE : PIN BOLT , DRAWING NUMBER : 60534-ITEM:B,REV:D MAJOR ASSEMBLY : RR ENTRY/EXIT TABLE; 60528; SMS Item Details : 1.MATERIAL REQUIRED AS PER PO ONLY. ANY DEVIATION IN THE SUPPLY WRT PO SHALL LEAD FOR REJECTION OF THE MATERIAL. 2. DIMENSIONAL REPORT, MECHANICAL PROPERTIES, DP TEST REPORT (WHERE APPLICABLE), HARDNESS REPORT, UT REPORTS, ALL PHYSICAL TEST REPORTS TO BE SUBMITTED PRIOR TO DISPATCH. 3. VENDOR TO SUBMIT ALL INTERNAL INSPECTION REPORTS AND MOC AND PRESSURE TEST CERTIFICATES BEFORE DISPATCH OF THE MATERIAL AND TO ISSUE DCC FROM SITE. 4. FITMENT AND PERFORMANCE WARRANTY REQUIRE. 5.ALL TEST REPORTS ARE SUBJECTED TO APLLICABLE. Item Note : 4 33397953 00010 00040 300088797 PEELER-KNIFE,DRG:61521/IT:A Technical Details Name : Vinaykumar Shridhar Makde Contact : Email : Vinaykumar.Makde@amns.in 3 NO APD NOMENCLATURE : CB PEELER-KNIFE , DRAWING NUMBER : 61521/REV:3,IT:A Item Details : Material require as per drawing. Vendor to provide all report Like UT,DP,HT,Diamensional etc before dispatch. No alternate material will acceptable Item Note : 5 33397953 00030 00050 300086215 WRAPPER ROLL,DRG:61516/ITEM NO-B Technical Details Name : Vinaykumar Shridhar Makde Contact : Email : Vinaykumar.Makde@amns.in 4 NO APD NOMENCLATURE : CB WRAPPER ROLL , DRAWING NUMBER : 61516/B ADDITIONAL INFORMATION : CB Item Details : Material require as per drawing. Vendor to provide all report Like UT,DP,HT,Diamensional etc before dispatch. No alternate material will acceptable Item Note : 6 33397953 00050 00060 300086216 CB WRAPPER ROLL AXLE,DRG:61516/IT:D Technical Details Name : Vinaykumar Shridhar Makde Contact : Email : Vinaykumar.Makde@amns.in 4 NO APD NOMENCLATURE : CB WRAPPER ROLL AXLE , DRAWING NUMBER : 61516/IT:D MAJOR ASSEMBLY : CB PEELAR ARM WRAPPER ROLL; 61368; SMS Item Details : Material require as per drawing. Vendor to provide all report Like UT,DP,HT,Diamensional etc before dispatch. No alternate material will acceptable Item Note : 7 33397953 00060 00070 300150783 PEELER CARRIER,DRG.NO:61520,ASTM A36 Technical Details Name : Vinaykumar Shridhar Makde Contact : Email : Vinaykumar.Makde@amns.in 2 NO APD NOMENCLATURE : PEELER CARRIER , DRAWING NUMBER : 61520 MATERIAL SPECIFICATION : ASTM A36 MAJOR ASSEMBLY : COIL BOX PEELER ARM KNIFE ASST , WEIGHT : 395 KG ADDITIONAL INFORMATION : TO MACHINE AND SUPPLY WITH 61521-B,F,L Item Details : Material require as per drawing. Vendor to provide all report Like UT,DP,HT,Diamensional etc before dispatch. No alternate material will acceptable Item Note : 8 33397953 00070 00080 300079083 APD,ROUND ANCHOR NUT;APD:61508/F Technical Details Name : Vinaykumar Shridhar Makde Contact : Email : Vinaykumar.Makde@amns.in 20 NO APD NOMENCLATURE : ROUND ANCHOR NUT , DRAWING NUMBER : 61508/F MATERIAL : CU ALLOY , MATERIAL SPECIFICATION : SAE 430 B MAJOR ASSEMBLY : CB PEELER; 61356; SMS , WEIGHT : 4 LBS Item Details : Material require as per drawing. Vendor to provide all report Like UT,DP,HT,Diamensional etc before dispatch. No alternate material will acceptable Item Note : 9 33397953 00080 00090 300091283 CB DEFLECTOR ROLL,DRG NO:61517/A Technical Details Name : Vinaykumar Shridhar Makde Contact : Email : Vinaykumar.Makde@amns.in 4 NO APD NOMENCLATURE : CB DEFLECTOR ROLL , DRAWING NUMBER : 61517/A Item Details : Material require as per drawing. Vendor to provide all report Like UT,DP,HT,Diamensional etc before dispatch. No alternate material will acceptable Item Note : 10 33397953 00100 00100 300086213 DEFLECTOR AXLE,DRG:61515/ITEM NO-A Technical Details Name : Vinaykumar Shridhar Makde Contact : Email : Vinaykumar.Makde@amns.in 2 NO APD NOMENCLATURE : DEFLECTOR AXLE , DRAWING NUMBER : 61515/A MATERIAL : SS 416 MAJOR ASSEMBLY : CB PEELAR ARM DEFLECTOR AXLE; 61368; SMS ADDITIONAL INFORMATION : POSITION NUMBER : DEFLECTOR Item Details : Material require as per drawing. Vendor to provide all report Like UT,DP,HT,Diamensional etc before dispatch. No alternate material will acceptable Item Note : 11 33398015 00010 00110 300894905 DEVICE,ROL-CHNGE,DRG:62892 Technical Details Name : Prajkta Salunkhe Contact : Email : PRAJKTA.SALUNKHE@AMNS.IN 6 NO DEVICE,ROLL-CHANGE ADDITIONAL INFORMATION:FOR FINISHING MILL WORK ROLL CHANGE DOG REMOVAL CYLINDER DRAWING DRG NO:62892 , DRAWING REV NO:1 Item Details : 1. MATERIAL SHOULD BE AS PER PO TEXT 2. ALL TESTING CERTIFICATE SUBMIT BEFORE DCC 3. ALL DETAIL MAKE SHOULD BE MENTION IN OFFER 4. PROPER AND SAFE PACKING REQUIRE FOR HANDLING 5. FITMENT AND GATENTEE CERTIFICATE REUIRE Item Note : 12 33398028 00010 00120 300078926 PIN,THREADED,DRG:60335/IT:B Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 100 NO APD NOMENCLATURE : PIN , THREADED , M36 , 160/200 BHN DRAWING NUMBER : 60335/REV:2,IT:B MAJOR ASSEMBLY : FURNACE A & D TABLE; 60011 Item Details : 1.MATERIAL REQUIRED AS PER PO ONLY. 2. DIMENSIONAL REPORT, MECHANICAL PROPERTIES, DP TEST REPORT (WHERE APPLICABLE), HARDNESS REPORT, UT REPORTS, ALL PHYSICAL TEST REPORTS TO BE SUBMITTED PRIOR TO DISPATCH. 3. VENDOR TO SUBMIT ALL INTERNAL INSPECTION REPORTS AND MOC AND PRESSURE TEST CERTIFICATES BEFORE DISPATCH OF THE MATERIAL AND TO ISSUE DCC FROM SITE. 4. FITMENT AND PERFORMANCE WARRANTY REQUIRE. 5.ALL TEST REPORTS ARE SUBJECTED TO APLLICABLE. Item Note : 13 33398028 00020 00130 300078925 APD,PIN;APD:60335/A Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 100 NO APD NOMENCLATURE : PIN , DRAWING NUMBER : 60335/A MATERIAL SPECIFICATION : AISI 1050 MAJOR ASSEMBLY : GDT ROLL BRG BLOCK ASSY ADDITIONAL INFORMATION : DIMENSION : M42 MM; 160/200 BHN Item Details : 1.MATERIAL REQUIRED AS PER PO ONLY. 2. DIMENSIONAL REPORT, MECHANICAL PROPERTIES, DP TEST REPORT (WHERE APPLICABLE), HARDNESS REPORT, UT REPORTS, ALL PHYSICAL TEST REPORTS TO BE SUBMITTED PRIOR TO DISPATCH. 3. VENDOR TO SUBMIT ALL INTERNAL INSPECTION REPORTS AND MOC AND PRESSURE TEST CERTIFICATES BEFORE DISPATCH OF THE MATERIAL AND TO ISSUE DCC FROM SITE. 4. FITMENT AND PERFORMANCE WARRANTY REQUIRE. 5.ALL TEST REPORTS ARE SUBJECTED TO APLLICABLE. Item Note : 14 33398165 00010 00140 300897554 CHUTE,MTLC,DRG:63386/IT-A Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 2 NO CHUTE,METALLIC ADDITIONAL INFORMATION:COILER AREA PINCH ROLL STAND SWITCH CHUTE DRAWING DRG NO:63386/IT-A , DRAWING REV NO:2 Item Details : 1.MATERIAL REQUIRED AS PER PO ONLY. 2. DIMENSIONAL REPORT, MECHANICAL PROPERTIES, DP TEST REPORT (WHERE APPLICABLE), HARDNESS REPORT, UT REPORTS, ALL PHYSICAL TEST REPORTS TO BE SUBMITTED PRIOR TO DISPATCH. 3. VENDOR TO SUBMIT ALL INTERNAL INSPECTION REPORTS AND MOC AND PRESSURE TEST CERTIFICATES BEFORE DISPATCH OF THE MATERIAL AND TO ISSUE DCC FROM SITE. 4. FITMENT AND PERFORMANCE WARRANTY REQUIRE. 5.ALL TEST REPORTS ARE SUBJECTED TO APLLICABLE. Item Note : 15 33398223 00010 00150 300859868 ASSY,SPROCKET,DRG:HSM-2022-A-04-001 Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 16 SET ASSEMBLY,SPROCKET DRAWING REV NO:0 , DRAWING DRG NO:HSM-2022-A-04-001 Item Details : 1.MATERIAL REQUIRED AS PER PO ONLY. 2. DIMENSIONAL REPORT, MECHANICAL PROPERTIES, DP TEST REPORT (WHERE APPLICABLE), HARDNESS REPORT, UT REPORTS, ALL PHYSICAL TEST REPORTS TO BE SUBMITTED PRIOR TO DISPATCH. 3. VENDOR TO SUBMIT ALL INTERNAL INSPECTION REPORTS AND MOC AND PRESSURE TEST CERTIFICATES BEFORE DISPATCH OF THE MATERIAL AND TO ISSUE DCC FROM SITE. 4. FITMENT AND PERFORMANCE WARRANTY REQUIRE. 5.ALL TEST REPORTS ARE SUBJECTED TO APLLICABLE. Item Note : 16 33398223 00030 00160 300078976 LINER,DRG:60571/IT:A Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 32 NO APD NOMENCLATURE : LINER , DRAWING NUMBER : 60571/REV:A,IT:A MAJOR ASSEMBLY : RM CENTERING SIDE GUARDS; 60557 ADDITIONAL INFORMATION : NORMALIZE & TEMPER 160/200 BHN Item Details : 1.MATERIAL REQUIRED AS PER PO ONLY. 2. DIMENSIONAL REPORT, MECHANICAL PROPERTIES, DP TEST REPORT (WHERE APPLICABLE), HARDNESS REPORT, UT REPORTS, ALL PHYSICAL TEST REPORTS TO BE SUBMITTED PRIOR TO DISPATCH. 3. VENDOR TO SUBMIT ALL INTERNAL INSPECTION REPORTS AND MOC AND PRESSURE TEST CERTIFICATES BEFORE DISPATCH OF THE MATERIAL AND TO ISSUE DCC FROM SITE. 4. FITMENT AND PERFORMANCE WARRANTY REQUIRE. 5.ALL TEST REPORTS ARE SUBJECTED TO APLLICABLE. Item Note : 17 33398223 00050 00170 300078923 THREADED PIN N & T,DRG:60241/ITEM NO-D Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 250 NO APD NOMENCLATURE : THREADED PIN N & T DRAWING NUMBER : 60241/REV:1,IT:D MAJOR ASSEMBLY : FURNACE A & D TABLE; 60011 ADDITIONAL INFORMATION : THREADED PIN N & T Item Details : 1.MATERIAL REQUIRED AS PER PO ONLY. 2. DIMENSIONAL REPORT, MECHANICAL PROPERTIES, DP TEST REPORT (WHERE APPLICABLE), HARDNESS REPORT, UT REPORTS, ALL PHYSICAL TEST REPORTS TO BE SUBMITTED PRIOR TO DISPATCH. 3. VENDOR TO SUBMIT ALL INTERNAL INSPECTION REPORTS AND MOC AND PRESSURE TEST CERTIFICATES BEFORE DISPATCH OF THE MATERIAL AND TO ISSUE DCC FROM SITE. 4. FITMENT AND PERFORMANCE WARRANTY REQUIRE. 5.ALL TEST REPORTS ARE SUBJECTED TO APLLICABLE. Item Note 18 33398303 00020 00180 300372902 CHAIN CURTAIN ASSLY,DRG:NO:60440 Technical Details Name : Devashish Singh Bora Contact : Email : DEVASHISH.BORA@AMNS.IN 4 NO APD NOMENCLATURE : CHAIN CURTAIN ASSLY , DRAWING NUMBER : 60440 MAJOR ASSEMBLY : PRIMARY DESCALING SYSTEM ADDITIONAL INFORMATION : PDS CHAIN CURTAIN ASSLY, DRG NO:-60440. BOM:- CHAIN CURTAIN HOLDER--DRG NO-60469/A--1NO,CHAIN CURTAIN SHAFT--DRG NO-60475/A--2NOS,CHAIN SPACER--DRG NO-60475/B--87NOS,CHAIN SPACER--DRG NO-60475/C--6NOS,CHAIN SPACER--DRG NO-60475/D--6NOS,HOLDER SEAL--DRG NO-60475/E--1NO,COTTER PIN--DRG NO-60475/F--4NOS,WASHER--DRG NO-60475/G--4NOS,CHAIN (COIL TYPE)--DRG NO-60475/H--58METER (APPROX). MATERIAL SHOULD BE ASSEMBLED AS PER DRG 60440. Item Details : 1) Manufacturing to be done as per SN : 200 standard of SMS. 2) Vendor must be submitted QAP, Dwg approval before stat manufacturing of materials. 3) Vendor should submit all relevent test certificates like MTC ,MOC, Chemical composition certificates ,Heat Treatment chart, Heat Treatment reports. quality inspection certificates like UT test ,radiography test etc as per specifications mentioned.These certificates to be submitted for final dispatch clearance. 4) All the items to be sand blasted and proper painting to be done as per SN:200 standards. 5) Any deviations from the Drawing specifications to be approved by AMNS 6) Final Inspection by AMNS Representative. 7) if any any daviation material will be not accepted Item Note :
