Municipal Adminitration And Water Supply Department-MAAWSD has published Tender For Beautification Of Tenuur Rob Below Portion Zone 1 Open Pavilion In Ward No. 28. Submission Date for this Tender is 06-02-2024. Bridge Work Tenders in tiruchirappalli Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling Plain Cement Concrete inculding clearing away from the site etc., complete. |
| 2 | Collection and supply of coarse gravel including cost and conveyance from approved quarry to site and stacking to departmental gauge etc., complete. |
| 3 | Filling with coarse gravel in layer of 15mm thick including watering and ramming to consolidation etc., complete. |
| 4 | Earth work excavation for foundation in ordinary soil, light black cotton sandy loam and dry silt including shoring, strutting, baling or pumping out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick and depositing the surplus earth at places as directed by the departmental officers with initial lead and lift |
| 5 | Narrow Excavation |
| 6 | Open Excavation |
| 7 | Supply and filling of M.Sand from approved Quarry including cost and conveyance of all materials work site all labour for spreading waatering, compacting etc, complete |
| 8 | Plain cement concrete 1:4:8 ( One cement, four M sand & eight 40mm metal) mix using 40mm gauge hard brocken granite stone jelly for foundation and flooring including dewatering if found necessary and laid in layers of not more then 10cm thick well rammed and consoildated including curing etc., complete complying with standard specification and as directed by the departmental officers etc., complete |
| 9 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. |
| 10 | With out strutting |
| 11 | Plain cement concrete 1:2:4 mix (One cement two M sand and four aggregate) using 20mm size ISS gauge HBBG metal including mixing,laying, consolidating, curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification - 1 m3 |
| 12 | Brick work in cement mortar 1:5 mix using Country Bricks (8 3/4" x 41/4" x 23/4") including cost of materials and labour charges etc. as per std. specification (For Below Ground Level) |
| 13 | Brick work in cement mortar 1:5 mix using Country Bricks (8 3/4" x 41/4" x 23/4") including cost of materials and labour charges etc. as per std. specification (For Super Structure upto 4.50m) |
| 14 | Plastering with Cement Mortar 1:5 mix 12mm thick including hacking etc., complete |
| 15 | Supplying and fixing of the following Compound Wall Grills of approved design using necessary size of Rectangular and Square Section Inculding cost of materials and labour charges etc., complete |
| 16 | Paving the floor with best approved quality fine polished Tandon Shagbad green stone slab of size below 2" x 2"20mm thick laid over a cement mortar 1:3 mix, fixing the slab in true tight angles with minimum possible width of joints and polishing the joints with cement mortar 1:3 mix and polishing with floor polisher to a high degree to finish and curing etc. complete as directed by depat. officers. |
| 17 | Paving the floor with Flamed Steel grey granite of 18mm thick of size 4" x 2"laid over a cement mortar 1:3 mix, fixing the slab in true tight anglesapplying cement slurry and pointed with white cement and colour pigments and curing etc. complete as directed by depat. officers. |
| 18 | Flooring with anti skid tiles of approved color and quality of size 600mm x 600mm x 6mm laid in cement mortar 1:3 mix, 20mm thick and pointing with the same mortar etc., completely and finish very neatly etc., complete |
| 19 | Providing and Laying of Jet Black Granite Polished Slab of size 1200mm x 600mm x 20mm thick laid over a cement mortar 1:3 mix, fixing the slab in true tight angles with minimum possible width of joints and pointing the joints with cement mortar 1:3 mix to finish and curing etc. complete as directed by depat. officers. |
| 20 | Labour Charges for Nosing for Granite Slab (Double Nosing) including cost of all labour charges etc., complete |
| 21 | Providing and laying of TAMIN paver block of required size 63mm thick to be laid in lorrying bone pattern with approved non sticking surface in the top and the rate including leveling the base, preparation of sub base with sand cushion 100mm thick, laying out the pavement, cut the pieces to fit the edge, vibrating the pavers, sweeping the sand grouting, providing transporting, loading unloading and laying of paver block as per standard specification. |
| 22 | Provision For conducting Geoligicial investigation survey etc., complete |
| 23 | Drilling 6" dia bore in hard rock area to any required depth as directed by the board officers including labour charges For inserting casing pipes assembly in the directed hole welding the joints if necessary grouting the casing pipes etc.,complete |
| 24 | Supply of 8" dia (200mm) PVC Casing pipe 6 kg/cm etc., complete |
| 25 | Supply and delivery of clear water vertical wet type 3 Phase submersible pumpset without panel board suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase ( 50LPM X 60M) |
| 26 | Labour charges for the Erection of Sumbersible Pump set in Bore well / Open well including fixing and jointing submersible cable with properclamp upto the starter to required depth andalso fixingriser pipes to the require depth valve erection clamp, pressure guage upto the exterior wall of pump room and erection of panel board consisting of TPICN switches, starter, voltmeter, ammeter, three pilot (indicating) lampcapacitor single phasing preventor, water level guard and laying adn jointing the cables adn twin earthing as per IE rule etc., complete and testingthe pumpset and trail run as directed by departmental officer; etc complete |
| 27 | Supply and delivery of direct online starter confirming to IS13947 and IEC 947 suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps2 pole Magnetic Contactor withunder Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor etc.,complete |
| 28 | Supply of 3 core 2.5sq.mm flat type copper cable conforming to IS 694/1990 etc., complete. |
| 29 | Supply and fixing of PVC Tank with ISI mark etc complete |
| 30 | Supply and fixing of following UPVC Pipes and Specials with ISI mark etc complete |
| 31 | 32mm dia UPVC Pipe (SCH80) |
| 32 | 25mm dia UPVC Pipe (SCH80) |
| 33 | 20mm dia UPVC Pipe (SCH80) |
| 34 | 15mm dia UPVC Pipe (SCH80) |
| 35 | 32mm dia UPVC Elbow |
| 36 | 32mm dia UPVC Tee |
| 37 | 32mm dia UPVC Coupling |
| 38 | 32mm dia UPVC Union |
| 39 | 25mm dia UPVC Elbow |
| 40 | 25mm dia UPVC Tee |
| 41 | 25mm dia UPVC Coupling |
| 42 | 25mm dia UPVC Union |
| 43 | 20mm dia UPVC Elbow |
| 44 | 20mm dia UPVC Tee |
| 45 | 20mm dia UPVC Coupling |
| 46 | 20mm dia UPVC Union |
| 47 | 15mm dia UPVC Elbow |
| 48 | 15mm dia UPVC Tee |
| 49 | 15mm dia UPVC Coupling |
| 50 | 32mm dia G.M Valve |
| 51 | 25mm dia G.M Valve |
| 52 | 20mm dia G.M Valve |
| 53 | 15mm dia Screw down Tap |
| 54 | Solvent Cement for UPVC |
| 55 | Lowering UPVCpipelaying&jointing withwithcapacity to proper allignment with |
| 56 | Supplying and fixing 110mm dia PVC rain water down fall pipe from railway over bridge deckslab to ground level using necessary PVC Bend, Tee, Shoe & MS Clamp including cost of Materials and Labour charges etc., complete. |
| 57 | Providing two legged scaffolding using 15cm diameter blue-gum props or casurina props or best quality bamboo props of 4m overall length (3m height + 0.50m into the ground + 0.50m projection) the distance between the two rows being 2m in both the rows with two horizontal props with 0.50m overlap on either side and braces at 2m c/c including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1m width etc complete from using coir and nails etc complete. ( Upto 8M) |
| 58 | Supply and fixing of TNEB meter Board suitable for 63A Three Phase service connection with 3 Nos. 63A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. etc., complete. (SD 127) |
| 59 | Wiring with 2 x 1.5 sq.mm.(22Nos/0.3mmDia) PVCinsulated single core unsheathed copper conductor cable of 1100 Volt Grade in suitable PVC rigid pipes concelaed in wall and ceiling with PVC accessories in flush with wall with 150mmx100mmx113mm T.W. switch box with 3mm thick hylem sheet cover for 15A 3pin non interlocking CS plug with continous earthwire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour forconcealed PVC Power plug point.(SD 40) |
| 60 | Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch boc 5A F.T. switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable color for concealed PVC light / fan point (for elctronic regulator) SD-24. |
| 61 | Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm diaGI pipe (Class "B") suitably bent at both ends with necessary angle iron upright and end supports for mains(SD No.70) |
| 62 | Supply and Fixing of Ornamental Twin fitting with Pole of KLITE Alpha model 120x80 series KP5075, 1no x30w/45w including cost of Foundation , all material & labour charges etc., complete. |
| 63 | Supply and laying of 4 core x 16 sqmm PVC armoured (Aluminium) L.T.U.G cable in a trench to be excavated at a depth of 0.75m putting 0.15m layer of sand and covering the cable completely with bricks and sand and . (SD 203) |
| 64 | Supply and laying of 3/20 PVC copper Wire: Supply and laying of 3/20 (36/0.3) PVC copper wire connecting of LED fitting IS 694/1990 with ISI mark |
| 65 | Supply and laying of LED Strip fitting inculding cost of all materials and labour charges etc.,complete |
| 66 | Supply and laying of LED Spot light fitting inculding cost of all materials and labour charges etc.,complete |
| 67 | Supply and Layingof 50mm HDPE Pipe: PN - 6 Supply and Laying of 50mm dia HDPE pipe on groundwith necessary clampingarrangements etc complete.As Directed by the departmental officers.IS 4984/1995 |
| 68 | Supply and erection of single phase kiosk type pillar box made of 14 gauge MS sheet on suitable angle iron frame with following accessories should be fixed as per standard condition. a) Supply of 32A,240V Porcelain rewireable fuse unit with hylem sheet. as per standard specification -2 Nos b) Supply of Double Pole 32A contactor with coil voltage 240V -1 No c) Supply of L & T / MDS double break timer as per standard specification d) Supply of Railway Lock -2Nos e) Earthing as per PWD standard with an earth electrode of 2 metres class ‘B’ GI pipe of dia not less than 32mm complete with necessary masonry work. 2Nos with necessary interconection complete etc,. Complete |
| 69 | Supply and fixing of cable Termination of 4 core x 16 sqmm PVC LTUG cable (Aluminium) armoured cable with necessary aluminium socket by crimping with elecrical connections etc., complete |
| 70 | Painting two coats with ready mixed plastic emulsion paint of 1st class quality and of approved color over a priming coat including through scraping clean removal of dirt etc., complete. |
| 71 | Painting and lettering for Beautification ofwall, using standard paints , necessary colour pigments, including cost of all materials & Labour charges etc complete |
| 72 | Painting two coats using synthetic enamel paint of approved colour and quality to New iron work etc., complete |
| 73 | Providing and Plantening of Koren grass as directed by the deparmental officer. Work involed mixing of red earth and sand filling the same to required level,mixing with manure.Rate includes cost of koren grass,red earth,sand, manure and including labour charges etc.,complete |
| 74 | Supplying and Plantening of following Plants and tree type plant including cost of planting and growing as per department officer instruction etc., complete |
| 75 | Bycuss Varieties |
| 76 | Adineeyam |
| 77 | Hemilia petens |
| 78 | Conveyance of excavated earth and dismantled materials to a lead of 2km including loading unloading charges and filling up in the low lying area as directed by the departmental officers etc., complete |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
