Tender For Renovation Work Of Priyadarshani Upper Primary School At Futala
Tender Value
Ref. Documents
Estimated cost
Bid Submission
08 Feb 2024
0 days left
EMD
15000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nagpur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Work Of Priyadarshani Upper Primary School At Futala
BOQ
| Sl. No. | Item Description |
| 1 | Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. |
| 2 | Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. |
| 3 | Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete. |
| 4 | Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. |
| 5 | Providing sand faced plaster externally in cementmortar using approved screened sand, in allpositions including base coat of 15 mm thick incement mortar 1:4 using waterproofing compoundat 1Kilogramper cement bag curing the same for notless than 2 days and keeping the surface of thebase coat rough to receive the sand facedtreatment 6 to 8 mm thick in cement mortar 1:4finishing the surface by taking out grains andcuring for fourteen days scaffolding etc.complete |
| 6 | Providing internal cement plaster 6 mm thick in asingle coat in cement mortar 1:3 without neeru finishto concrete surface in all positions includingscaffolding and curing etc. complete. |
| 7 | Providing internal cement plaster 12mm thick insingle coat in cement mortar 1:3 without neerufinish to concrete or brick surfaces, in all positionincluding scaffolding and curing etc.complete. |
| 8 | Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use) |
| 9 | Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. |
| 10 | Providing and fixing white glazed earthenwareWash Hand Basin of 55cm. x 40 cm. sizeincluding cold water pillar tap/cold and hot waterpillar tap brackets, rubber plugs and brass chain,stop tap and necessary pipe connections includingP.V.C. waste pipe and trap up to the outside face ofthe wall. Making good the damaged surface, testingetc. complete. |
| 11 | Providing and fixing H.D.P container Syntex or alikeone piece moulded water tank made out of highdensity polythyler and built corrugated inclusive ofdelivery up to destination hoisting and fixing ofaccessories such as inlet,outlet overflow pipeinclusive of all tanks capacity between 200 to1000 liters |
| 12 | Providing and fixing 15 mm diameter PVC Aqua krafttype of approved make super bib tap with flangeincluding all accessories etc complete |
| 13 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 14 | Providing and fixing 40mm diameter and 1.5 mmthick Stainless steel hand railing in S.S.304 Gradeincluding fabricating ,fixtures, errecting, necessarywelding, grinding, finishing, buffing to stainlesssteel pipe etc. complete |
| 15 | Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. |
| 16 | Providing and laying ceramic tiles having size 30 cm.x 60 cm. confirming to correspondingI.S. for dado and skirting in required position withreadymade adhesive mortar of approved quality onplaster of 1:2 cement mortar including joint fillingwith white/ colour cement slurry cleaning curing etc.complete |
| 17 | Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. |
| 18 | Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete |
| 19 | Providing and fixing in position. (as per I.S.1868 /1982) Aluminium sliding window of two tracks withrectangular pipe having overall dimension 63.50 x38.10 x 1.02 mm at weight0.547 Kilogram/Running metre. and window framebottom track section 61.85 x 31.75 x 1.20 mm atweight 0.695 Kilogram/Running metre. Top andside track section 61.85 x 31.75 x1.30 mm at weight 0.659 Kilogram/Running metre.The shutter should be of bearing bottom 40 x 18 x1.25 mm at weight 0.417 Kilogram/Running metre.Inter locking section 40 x 18 x1.10 mm at weight 0.469 Kilogram/Running metre.And handle section 40 x 18 x 1.25 mm at weight0.417 Kilogram/Running metre. and top section 40 x18 x 1.25 mm at weight 0.417 Kilogram/Runningmetre. As per detailed drawings and as directedby Engineer in charge with all necessaryAluminium sections fixtures and fastenings such asroller bearing in nylon casting and self locking catchfitted in vertical section of shutter including 5 mmthick plain glass with all required screws and nutsetc, complete. With colour Anodising with box. |
| 20 | Providing and fixing crimped with G.I. mesh and size20 mm x 20mm 10 guage to iron angle frameincluding welding crimp mesh to angle frameand steel flat, fixing the frame in its originalposition and oil painting etc.complete ( excluding costof structural steel) |
| 21 | Providing and fixing solid core flush door shutter indouble leaf 32 mm thick decorative type of exteriorgrade as per detailed drawings approved face veneers3 mm thick on both faces or as directed, allnecessary beads, mouldings and lipping, wroughtiron hold fasts, chromium plated fixtures andfastenings, with brass mortise lock, chromiumplated handles on both sides, and finishing withFrench Polish etc. complete. |
| 22 | Providing and fixing M40 grade thick vibrated pullcast or similar type concrete frame with chamferconforming to I.S. 65241983 having 6 mm dia. bars3 Nos. And stirrups @250 mm c/c and fixing inwall with 6 Nos of hold fast of 12 mm dia bars500 mm long including primer and oil painting etc,complete) frame size 60 mm x 100 mm |
| 23 | Providing and Fixing 30 MM thick BOTH SIDEPRELAMINATED SOLID PANEL PVC DOORSHUTTER consisting of frame made out of M.S tubesof 19 guage thickness and, size 19 x 19 mm for stylesand 15 x15 mm for the top and bottom rails, M.Sframe shall have a coat of metel primer ofapproved make and manufacture. M.S frame shallbe covered with heat mouled PVC \"C\" channel madefrom 5 mm (+/0.25) thick prelaminated sheet ofdensity 600 Kilogram/cbm ,of size 30mm thickness70mm width out of which 50mm shall be flat and20mm shall be tapered in 45? angle on either sideforming stiles ; and 5 mm thick ,95 mm wide PVCsheet out of which 75 mm shall be falt and 20 mmshall be tapered in 45 on the inner side to form topand bottom rail and 115 mm wide PVC sheet out ofwhich 75 mm shall be falt and 20 mm shall betapered on both sides to form lock rail.Top,bottomand lock rail shall be provided either side of thepanel. An additional 5 mm (+/0.25) thick PVC stripof 20 mm width is to be stuck on the bottom side ofthe \" c \" channel prelaminated paneling of 5 mm(+/0.25) thick PVC sheet to be fitted inside the M.S.frame welded/ sealed to the styles and rails with 5mm (+/0.25) x 30 mm PVC sheet beading on either |
| 24 | Providing and applying external raincoat painting with crack filling acrylic polymer based chemical compound coating to the external surface of walls to prevent water seepage in the masonry walls during monsoon added with required shade Steiner to give required shade to the surface in two coats. Including providing three coat of priming of polymer base primer including preparing surface scrapping the existing loose old paint, removing loose particles of sand on the surface opening and cleaning the cracks developed in the external plaster, removing loose particles by chiseling, filling cracks by chemicals compound of approved make with proper penetration etc. Coating of Raincoat with the help of brush and as per instructions and specification given by manufacturer and with instruction from Engineer in- charge. Work shall be executed by certified applicator only and covering gurantee of 3 years on court stamp paper of Rs. 500/- and necessary testing etc. complete. |
| 25 | Providing and applying two coats of synthetic enamelpaint of approved colour to new /old structural steelwork and wood work in buildings, includingscaffolding if necessary, cleaning and preparing thesurface (excluding primer coat) etc. complete. |
| 26 | Providing and fixing board displaying information,such as \"Name of work, Tender cost, Name ofContractor, Work completion and liability period etc\",having rectangular shape of 1.20m x 0.90m sizemade out 18 gauge (1.25mm) thick mild steel sheetpainted with one coat of Zinc chromate stovingprimer and two coats of enamel paint on front sideand grey stove enamel on back side and border /messages / symbols etc. with approved colour shadepaint complete, on M.S.angle of size 35 x 35 x 3 mmframe with properly cross braced M.S. angles of size35mmx35mmx3mm duly painted including Two M.S.angle iron posts of size 65 mm x 65 mm x 6 mm,3.65 m long painted with alternate black and whitebands of 25 cm width including all fixtures etc.andfixing the boards in 1:4:8 concrete block of size 60cm x 60 cm x 75 cm including, excavation,refilling, transportation, and labour etc complete.Spec. Number As directed by Engineer in Charge |
| 27 | Transportation of Material obtained from debries of various sorts including necessary excavation / loosing including loading,unloading and conveying and disposing as directed. |
AI Tender Summary
Tender Timeline
Feb 02, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 08, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 09, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender