Military Engineer Services-MES has published Tender For Provision Of Toilet Additional/Alternator To Dsc Guard Rest Room And Special Repair To Certain E/M Equipments At Af Stn Chandinagar In Aor Of Ge (Af) Faridabad. Submission Date for this Tender is 23-02-2024. Mobile Generator Tenders in Faridabad Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Feb-2024 | Revise Sch of credit | Terms and Conditions | 23-02-2024 |
| 2 | 13-Feb-2024 | Revise BOQ | BOQ | 23-02-2024 |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls, Ceiing etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 2 | M&L for rendering 15 mm thick cement plaster in CM 1:6 onbrick Work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 3 | M&L, Rendering 15mm thick in CM 1:4 onof brick work or concrete surfacefinish ever and smooth (w/o using extra cement) incl WPC as per user manual complete all as specified and directed by Engineer-in-Charge. |
| 4 | Supply only liquid WPC complete all as specified and directed by Engineer-in-Charge. |
| 5 | M&L for rendering 10mm thick in CM 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 6 | M & L for preparation of new plastered surface and applying two coats of oil emulsion distemperon wall over one coat of primer incl one layer of 3mm thick wall care compound of putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed by Engineer-in-Charge. |
| 7 | M & L for preparation of new plastered surface and applying two coats of oil emulsion distemperon ceiling over one coat of primerincl one layer of 3mm thick wall care compound of putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L fortwo coat ofAcrylic smooth exterior emulsion paint over one coat of acrlic primer incl one layer of 3mm thick wall care compound ofputty for exterior/interior on old scraped wall/ceiling surfaces or new plasterd surfaces and old surface obtain smooth finish using sand paper complete all as specified and directed by Engineer-in-Charge. Note : Colour and make as approved by Engr-in-Charge. |
| 9 | M&L for preparation of newsteel or iron surfaces of any description, n exc 10cm in width or girthand applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge. |
| 10 | M & L for two coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth exc 10cm complete all as specified and directed by Engineer-in-Charge. |
| 11 | M&L for non skid ceramic coloiured tiles 7 to 8 mm thick (square/rectangular ) area of each tile exe 0.11 sqm but n.exe 0.18 sqm, in floors & dado of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,15 mm thick rendering in bedding layer or screed bed in cement mortar (1:6) in floors incl dismantling tiles etc complete all as specified and directed by Engineer-in-Charge. |
| 12 | M& L for Glazed ceramic jointless light/coloured group of size 300/350mmx450/600mm, thickness not less than 6mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match,laid over and including 10mm thick plastering in cement mortar 1:4,incl dismantlingtiles etc complete all as specified and directed by Engineer-in-Charge. Note : shade & design as approved by GE |
| 13 | M&L for Virified tiles light shade /dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm , in floors, dado , skirtingetc. set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match and incl dismantling tiles etc complete all as specified and directed by Engineer-in-Charge. |
| 14 | Providing plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregates, 25mm thick, as in floor/sub base and finishing concrete surface fair and even to receive top floor finishes complete all as specified and directed by Engineer-in-Charge. |
| 15 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge. |
| 16 | M&L rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engineer-in-Charge. |
| 17 | M&L for Granite 18-20mm thick (of any type) work(table rubbed and polished)in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and dismantling complete all as spd and directed. |
| 18 | Taking down existing roof treatmentof any description and any type complete all as specified and directed by Engineer-in-Charge. |
| 19 | M & L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, inclBrushing neat cement slurry with 3.0kg of cement per sq. metreetc complete all as specified and directed by Engineer-in-Charge. |
| 20 | M&L, Rendering 15mm thick in CM 1:4 onof brick work or concrete surfacefinish ever and smooth (w/o using extra cement) incl WPC as per user manual at any height etc complete all as specified and directed by Engineer-in-Charge. |
| 21 | M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/SqmincludingAPP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed by Engineer-in-Charge. |
| 22 | M&L for PCC (1:2:4) nominal mix, type B-0, using 12.5mm graded stone aggregate in roof paddingand surface finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 23 | M&L for Making benching with PCC (1:2:4) type B0 using WPC along side wall adjoining to roof in concave shape complete all as specified and directed by Engineer-in-Charge. |
| 24 | Removing plants / sherbs duct wall , junction with roots using herbicide chemical of existing brick or concrete for multistoried building at any storeyed and any height and match the surface with existing surface using 1:3 CM, complete all as specified and directed by Engineer-in-Charge. |
| 25 | Dismantling water tanks 250 to 500 ltrs capacity complete all as specified and directed by Engineer-in-Charge. |
| 26 | S&F Rotational molded polyethylene water storage tanks 3 layered, ISI marked (cylindrical vertical with threaded lid) hoisted and fixed in position all as specified in SSR Part-I of Capacity 500 litreswith GI Tank Nipple inlet and outlet 20mm complete all as specified and directed by Engineer-in-Charge. |
| 27 | S&F Ball valve, high pressure withof PTMTwith epoxycoated aluminium rod and high density plastic ball screwed for iron pipe orfixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms) complete all as specified and directed by Engineer-in-Charge. |
| 28 | S&F Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore and fixed in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 29 | Dismantling wall and ceiling boards (fibre pulp insulation etc) or insulation boards, slabs, blankets any thickness, incl cover fillets complete all as specified and directed by Engineer-in-Charge. |
| 30 | M&L for PVC hollow wall panelling 5 to 8 mm thick on ceilling with necessary frame work in POP Design and any colour approved by engr-in-charge,inclusive of fixing on to wall/ceiling incl moulding end caps fixed with PVC sleeves and screws as requiredat site complete all as specified and directed by Engineer-in-Charge. |
| 31 | Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each and complete all as specified and directed by Engineer-in-Charge. |
| 32 | Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 sqm each and complete all as specified and directed by Engineer-in-Charge. |
| 33 | S&Ffor factory madeSolid WPC Door frame size ( 100mm X 65mm Single Rebate ) made from 100% LEAD FREE(single extruded process) material with density780 kg/Cbm & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawingsincluding all necessary assories complete all as specified and directed by Engineer-in-Charge. Note :The door frame should be Water Proof , Termite Proof , Fire Retardent and having excellent screw holding capacity. |
| 34 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm in double ribbetcomprising of virgin PVC polymer of K value 58-60(SuspensionGrade),calcium carbonate and natural fibers (wood powder/rise husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwd with full body threaded star headed SS screws having minimum frames density of 750 kg/cum ,screw withdrawal strength of 2200 N(face) & 1100 N (Edge),minimum compressivestrength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS Hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engineer-in-Charge. (M.S hold fast/lugs or SS Dash fasteners are included in this with this item complete). |
| 35 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 59-60 (SuspensionGrade) ,calcium carbonate and natural fibers(wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity indexof 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900N (Edge),minimum compressive strength 50 N/mm2,modulus of elasticity 850 N/mm2 and resistance to spread of flames of class A category with property of being termite /borer proof,water /moisture proof and fire retardant WPC to be laminated with PVC foil of minimum14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screw,complete all as specified and directed by Engineer-in-Charge. Note: satinless steel butt hinges and necessary SS Screw shall be paid separately) |
| 36 | M&L for Factory made solid panel PVC sketlton door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with. heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles andSingle Side Prelam PVC sheet used and stile & rails having one side feathered edge and on other side 10mm 900 bent edge for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wire gauzed i.e. panel will be of wire gauze in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly, suppling & fixing in the frame at site as per specification & drawing. |
| 37 | M&L for anodised aluminium framed workfor door, window / vent (powder coated)aluminium section weighting 0.55kg/RM with one or more rebated incl jointed cleat for fixing etc complete all as specified and directed by Engineer-in-Charge. |
| 38 | M&L for anodised aluminium powder coated sliding/fix type window and ventilator shutters, aluminium section weighting not less than 0.55kg/RMincl necessary 4.8mm th sheet glass ordinary quality glass/ frosted incl joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 x 150mm aluminium handles, 3 x 100mm hinges aluminium, 2 x 150mm Aluminium tower bolts complete all as specified and directed by Engineer-in-Charge. |
| 39 | S & F for mild steel framed work as in grill, guard bars etc with ends of bars/FI shoulders and or riveted or forged in to spikes, framed guard bar and similar works confirming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engineer-in-Charge. |
| 40 | S & F for stainless steel wire cloth 0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed by Engineer-in-Charge. |
| 41 | S&F butt hinge, Stainless steel 100mm long complete all as specified and directed by Engineer-in-Charge. |
| 42 | S&F aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed complete all as specified and directed by Engineer-in-Charge. |
| 43 | S&F Floor door stopper of aluminium alloy body double and tongue annodised with rubber shoe and fixed of size 150 mm complete all as specified and directed by Engineer-in-Charge. |
| 44 | S&F Aluminium anodised barrel tower bolt of extruded section 200 mm long and fixed complete all as specified and directed by Engineer-in-Charge. |
| 45 | S&F extruded aluminium alloy handle fabricated type anodised 150 mm long complete all as specified and directed by Engineer-in-Charge. |
| 46 | S & F in repairs 20mm wide door seal aluminium powder coated fixed with screws on bottom rails of door shutters complete all as specified and directed by Engineer-in-Charge. |
| 47 | S&F Brass 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete including taking down old one complete all as specified and directed by Engineer-in-Charge. |
| 48 | S&F inVitreous china squatting pan of Orissa Pattern size 580x 440 mm whitewith ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe fixed in repair including placing in position in floor and embedded in cushion of PCC 1:7:12 type E-1using brick bats and finishing the top surfaces to match with the existing flooring complete all as specified and directed by Engineer-in-Charge. |
| 49 | S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete including taking down by dismantling the existing unserviceable cistern of any description complete all as specified and directed by Engineer-in-Charge. |
| 50 | S&F in repair forVitreous China wash basin, White, flat back, size550x400 mmexcluding taps, waste, chain and plug and porcelain stopperbut including brackets complete all as specified and directed by Engineer-in-Charge. |
| 51 | M&L for 600x450 mmbeveled edge mirror of selected quality glass, mounted on 6 mm thick AC building board and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed by Engineer-in-Charge. |
| 52 | S & F in repair Bib tap CP fancy type long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe with all fittings complete all as specified and directed by Engineer-in-Charge. |
| 53 | S & F in repair Stop cock /angle CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed by Engineer-in-Charge. |
| 54 | S & F in repair Stop cock concealed long shank chromium plated fancy type 15 mm borescrewed down high pressure with crutch or butter fly handle complete all as specified and directed by Engineer-in-Charge. |
| 55 | S& F for swan neck pillar cock fancy typechromium plated screw with iron pipe incl all fittings in repairs complete all as specified and directed by Engineer-in-Charge. |
| 56 | S&F for Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms)complete all as specified and directed by Engineer-in-Charge. |
| 57 | S&F for Soap dish,fixed to plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge. |
| 58 | S&F for PVC connections 60cm long superior quality with PTMT nut on both side complete all as specified and directed by Engineer-in-Charge. |
| 59 | S&F in repair grating round 125mm size of CP complete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F stainless steel pegset of six suitable size of length complete etc complete all as specified and directed by Engineer-in-Charge. |
| 61 | Taking up or down 15 mm dia bore steel tubing and connection including cleaning for refixing or removed to store complete all as specified and directed by Engineer-in-Charge. |
| 62 | S&F for GI tubing 15mm boremedium grde with all fittings and fixed complete to wall and ceiling or laid in floors etc incl cutting chases in brick wall pinning in making good in CM 1:3 to facings where required complete all as specified and directed by Engineer-in-Charge. |
| 63 | Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore complete all as specified and directed by Engineer-in-Charge. |
| 64 | S&F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge. |
| 65 | Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 25 mm dia bore complete all as specified and directed by Engineer-in-Charge. |
| 66 | S&F GI tubing 25 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge. |
| 67 | S&F in repair for 100mm bore Cast iron soil, waste and vent pipes, in any lengthwith or without ears, with cement joints, laid in trenches or in floors incl taking down old pipe complete all as specified and directed by Engineer-in-Charge. |
| 68 | S&F in repair for 100mm bore Cast iron soil, waste and vent pipes, in any lengthwith or without ears, with cement joints, fixed to walls etcincl taking down old pipe complete all as specified and directed by Engineer-in-Charge. |
| 69 | S&F in repair for 75mm bore Cast iron soil, waste and vent pipes, in any lengthwith or without ears, with cement joints,laid in trenches or in floors etc complete incl taking down old pipe complete all as specified and directed by Engineer-in-Charge. |
| 70 | S&F in repair for 100mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge. |
| 71 | S&F in repair 75mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge. |
| 72 | S&F in repair Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed by Engineer-in-Charge. |
| 73 | Demolition of Concrete of any description and in any position not otherwise specifically provided for and disposal of debris to outside the station where suitable for contractor complete all as specified and directed by Engineer-in-Charge. |
| 74 | M&L Form work to rough finished flat surfaces of chullah hoods, chajjas, troughs and similar items in- cluding edges complete all as specified and directed by Engineer-in-Charge. |
| 75 | M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with themild steel wire (annealed) not less than 0.9mm dia or securing with clips and complete all as specified and directed by Engineer-in-Charge. |
| 76 | All as per item No 75 abovebut 6 to 8 mm dia and over and including in stirrups, spacers and binders. |
| 77 | M&L Reinforced cement concrete M-25 using 20mm graded aggregates in chajjas complete all as specified and directed by Engineer-in-Charge. |
| 78 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including floor finishes/tiling work and disposal of debris complete all as specified and directed by Engineer-in-Charge. |
| 79 | M & L for 50 mm thick PCC 1:3:6 type C-2 (using 40 mm agg. ) as in plinth protection / path/ any paved area complete all as specified and directed by Engineer-in-Charge. |
| 80 | Removing/getting out of excavated material/spoils/debbries dumped at site to a distance exceeding 0.5 m but n exc 1.5 km and depositing where directed at a level n. exc 1.50 m above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 81 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge. |
| 82 | Excavation in trenches n.exc 1.5m deep in soft/loose soil not exceeding 1.50 m wide and n exc 1.50m in depth for foundation etcor for shafts, wells, cess pits, man holes pair holes etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge. |
| 83 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. (soft/loose soil) complete all as specified and directed by Engineer-in-Charge. |
| 84 | Removing excavated material n exc. 50 m and depositing complete all as specified and directed by Engineer-in-Charge. |
| 85 | M&L for cement concrete 1:4:8 type D-2 as in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge. |
| 86 | M&L for brick work with sub class "B" bricks straight or curved on plan exc 6 mtr mean radious built in CM 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 87 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar(1:6) finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 88 | Preparation of new plastered surfaces and applying two coats of cement base paint in any colours on wall over a coat of primer complete all as specified and directed by Engineer-in-Charge. |
| 89 | M&L for 100mm thick PCC (1:4:8) type D-2 (40mm graded stone aggregate) as in sub base of flooring complete all as specified and directed by Engineer-in-Charge. |
| 90 | M&L 75mm thick cement concrete type C-2, 1:3:6 ( 40mm graded aggregate) as in plinth protection over well rammed earth complete all as specified and directed by Engineer-in-Charge. |
| 91 | S&F in opening, solid PVC Frame of size 50mm x 47mm for door made out of 5mm plain colour PVC Sheet reinforced with MS Square tube complete all as specified and directed by Engineer-in-Charge. |
| 92 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC’C’ channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, and bottom rail: on either side and as gap insert for top rail and bottom rail Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile and rail with suitable PVC sheet beading, and joined to gather with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed by Engineer-in-Charge. |
| 93 | M & L forsteel ventilator, with top hung shutter incl hinges peg stay, glazing bars ,complete all as specified and directed by Engineer-in-Charge. |
| 94 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each panecomplete all as specified and directed by Engineer-in-Charge. |
| 95 | S&F 100 mm long butt hinges aluminium alloy anodised and fixedcomplete all as specified and directed by Engineer-in-Charge. |
| 96 | S&F 150mm aluminium extruded alloy handles fabricated type complete all as specified and directed by Engineer-in-Charge. |
| 97 | S&F 150 mm alumunium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge. |
| 98 | S&F for vitrious china wash down water pan incl PCV cover, trap, flush pipe and all fittings (padestal pattern ) complete all as specified and directed by Engineer-in-Charge. |
| 99 | S&F for vitreous china urinals, bowl type including provding and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs, 60mm long brass screws, pointing around urinal back in cement, discharge/waste pipe, grating and waste coupling for discharge pipe complete all as specified and directed by Engineer-in-Charge. |
| 100 | S&F for brass chromium plated shower rose of any size and fixed complete all as specified and directed by Engineer-in-Charge. |
| 101 | S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed by Engineer-in-Charge. |
| 102 | S&F for rotetional moulded PVC water storage tanks (cylindrical vertical with closed top) of Capacity in litres 500, hoisted and fixed in postion complete all as specified and directed by Engineer-in-Charge. |
| 103 | S&F for ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe complete all as specified and directed by Engineer-in-Charge. |
| 104 | M&L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge. |
| 105 | S&F for 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge. |
| 106 | All as per item No 105 above but 110mm dia |
| 107 | S&F PVC (SWR) bends of 75mm dia complete all as specified and directed by Engineer-in-Charge. |
| 108 | All as per item No 107 above but 110mm dia |
| 109 | M&L for 60 mm thick precast cement concrete coloured interlocking tiles of grade M-35 any shape and size confirming to IS 15658-2006 with grey cement and pigmentin floors / pavements incl 30 mm thick sand cushioning complete all as specified and directed by Engineer-in-Charge. |
| 110 | M/L for Sand filling under floors including watering and consolidation complete all as specified and directed by Engineer-in-Charge. |
| 111 | S&F for mild steel work as in channel, angle and similer works, fixed independently, without connecting plates, etc conforming Fe 410-W (Gde E 250) quality A complete all as specified and directed by Engineer-in-Charge. |
| 112 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self tapping screw complete all as specified and directed by Engineer-in-Charge. |
| 113 | Prepartion of steel surfaces over 10 Cm width or girth and applying two coats of synthetic enamel paint over coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge. |
| 114 | S&F 75mm PVC (SWR) vent cowls complete all as specified and directed by Engineer-in-Charge. |
| 115 | Taking down UNSV LT Under Ground cable of any size complete all as specified and directed by Engineer-in-Charge. |
| 116 | Supply and laying, connecting and testing XLPE underground cableinsulated, and overall sheathed with aluminium conductor heavy duty 1100 volts grade10 sqmm 4 core laid in trenches/ on poles/ road crossing or passing through existing/new pipe under road crossing, clamping on walletc complete all as specified and directed by Engineer-in-Charge. Note:(i) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highwaysand Aluminium thimbles/lugs are incl in the quoted rates. (ii) All equipments , machinery or toolsif required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost. |
| 117 | All as per itemNo 116 abovebut for 2 core 16 Sqmm. |
| 118 | All as per itemNo 116 abovebut for 2 core 25 Sqmm. |
| 119 | All as per itemNo 116 abovebut for 4 core 25 Sqmm. |
| 120 | All as per itemNo 116 abovebut for 3.5 core 70 Sqmm. |
| 121 | All as per itemNo 116 abovebut for 3.5 core 95 Sqmm. |
| 122 | All as per itemNo 116 abovebut for 3.5 core 120 Sqmm. |
| 123 | All as per itemNo 116 abovebut for 3.5 core 185 Sqmm. |
| 124 | Excavation in trenches in soft/loose soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth for laying of cables/poles or foundation etc and getting out complete all as specified and directed by Engineer-in-Charge. |
| 125 | Returning, filling, including spreading levelling and well ramming in layers not exceeding 25cm apart complete all as specified and directed by Engineer-in-Charge. |
| 126 | Removing of surplus excavated soil to a distance not exceeding 50 Mtr from starting point and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 127 | M&L for sand cushoning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable to trenches complete all as specified and directed by Engineer-in-Charge. |
| 128 | M&L for sub class `B` bricks for cable protection complete all as specified and directed by Engineer-in-Charge. |
| 129 | Supply& fixing in replacement MCCBTPN 63 Amps 415 Volts 16 kA complete all as specified and directed by Engineer-in-Charg |
| 130 | Supply& fixingin replacement MCCBTPN 100 Amps 415 Volts 16 kA complete all as specified and directed by Engineer-in-Charg |
| 131 | Supply& fixingin replacement MCCBTPN 125 Amps 415 Volts 16 kA complete all as specified and directed by Engineer-in-Charg |
| 132 | Supply& fixingin replacement MCCBTPN 160 Amps 415 Volts 36 kA complete all as specified and directed by Engineer-in-Charg |
| 133 | Supply& fixing in replacement MCCBTPN 200 Amps 415 Volts 36 kA complete all as specified and directed by Engineer-in-Charg |
| 134 | Supply& fixing in replacement MCCBTPN 250 Amps 415 Volts 36 kA complete all as specified and directed by Engineer-in-Charg |
| 135 | Supply& fixing in replacement MCCBTPN 400 Amps 415 Volts 36 kA complete all as specified and directed by Engineer-in-Charg |
| 136 | Supply& fixingin replacement MCCBTPN 630 Amps 415 Volts 50 kA complete all as specified and directed by Engineer-in-Charg |
| 137 | S&F on load Change Over switch 415V in sheet metal enclosures 4 pole of capacity 320 Amps 415 Voltinclmaking suitable arrangement to fix on wall/panel as requiredcomplete all as specified and directed by Engineer-in-Charge. |
| 138 | S&F on load Change Over switch 415V in sheet metal enclosures 4 pole of capacity 200 Amps 415 Voltinclmaking suitable arrangement to fix on wall/panel as required complete all as specified and directed by Engineer-in-Charge. |
| 139 | S&F Busbar Chambersuitable size forset of 04 aluminium busbar 400 Amps rating ,supported with suitable size as per direction, each of heavy duty porcelin stand lock with suitable sizeof brass nut, bolts and washer with heat shrinkable PVC sleeving.The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral, The Chambershall be fixed30 cm above the normal ground level complete with PCC foundation (1:2:4 )type B2complete all as specified and directed by Engineer-in-Charge. |
| 140 | Supply, installation and testing & commissioning ofLT Panelin door type made of 2 mm thick CRCA sheet, suitable angle iron frame & PCC, dust & vermin proof , front operated construction, enclosure class -IP 52, CPRI standardincluding copper Bus Barof 1000 ampsof suitable length, 3 Phase 50 Hz TPN 4 Nos mounted on suitable type ofinsulators. The metal surface shall be 2.0 mm thicknesshavingpowdercoating with Seimen"s grey colour complete withtop /bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors in front & removable plate at the back to achieve dust and vermin proof panel withall inter connection wiring of suitable size of copper wires, ckt labels etc. Panel shall be comprising ofseperate chambers / modules / compartment to accomodate incomer &outgoing ,MCCB andinstrument chamber comprise of digital type ammeter & voltmeter flush mounted, selector switches, CT"s,etc. complete all as specified and directed by Engineer-in-Charge. The panel board shall be comprising of the following :-Incoming :- (a) MCCB 800 Amp FP 415 V with rupturing cap 65KA (adjustable type) -01 Nos Outgoing :- (a) MCCB 400 Amp FP 415 V with rupturing cap 36 KA (adjustable type) -02 Nos (b)MCCB 250 Amp FP 415 V with rupturing cap 25 KA (adjustable type) -02 Nos (c)MCCB 200 Amp FP 415 V with rupturing cap 25 KA (adjustable type) -02 Nos (d)Digital Ammeter with LED indication lamp with selector switch-1 Nos (e)Digital voltmeterwith LED indication lamp with selector switch -1 Nos |
| 141 | Supply, installation, testing and commissioning of LT panel out door type made out of 3.15 mm thick CRCA sheet, suitable angle iron frame for structure and base, copper busbar 1000 amps rated with SMC busbar supports - 04 Nos, dust/vermin proof, epoxy powder coated siemens grey painting over a coat of red oxide primer inside/outside of the panel, double shuttered with locking arrangements, cable alley, anodized aluminium with black background with white engraved letter of name plates, schematic diagram for distribution, rubber gaskets, cable glands and internal copper wirings with appropriate lugs complete including necessary civil works and making good disturbed surfaces with following accessoriescomplete all as specified and directed by Engineer-in-Charge. (CPRI Approved) Incoming MCCB four pole, 50 KA, 400 Amps (adjustable type) - 01 No Onload change over switch 400 Amps, four pole - 01 No Outgoing MCCB four pole, 36 KA, 250 Amps (adjustable type) - 02 No MCCB four pole, 36 KA, 200 Amps (adjustable type) - 02 No MCCB four pole, 25 KA, 125 Amps (adjustable type) - 02 No MCCB four pole, 16 KA, 100 Amps (adjustable type) - 02 No Meter Digital Ammeter with LED indication lamp with selector switch-1 Nos Digital voltmeterwith LED indication lamp with selector switch -1 Nos |
| 142 | Supply, installation and testing & commissioning ofLT Panelout door type made of 3.15 mm thick CRCA sheet, suitable angle iron frame & PCC, dust & vermin proof , front operated construction, enclosure class -IP 52, CPRI standardincluding copper Bus Barof 400 ampsof suitable length, 3 Phase 50 Hz TPN 4 Nos mounted on suitable type ofinsulators. The metal surface shall be 3.15 mm thicknesshavingpowdercoating with Seimen"s grey colour complete withtop /bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors in front & removable plate at the back to achieve dust and vermin proof panel withall inter connection wiring of suitable size of copper wires, ckt labels etc. Panel shall be comprising ofseperate chambers / modules / compartment to accomodate incomer &outgoing ,MCCB andinstrument chamber comprise of digital type ammeter & voltmeter flush mounted, selector switches, CT"s,etc complete all as specified and directed by Engineer-in-Charge. The panel board shall be comprising of the following :- Incoming :- (a) MCCB 250 Amp FP 415 V with rupturing cap 35 KA (adjustable type) -01 Nos Outgoing :- (a)MCCB 100Amp FP 415 V with rupturing cap 25 KA (adjustable type) -03 Nos (b)MCCB 63 Amp FP 415 V with rupturing cap 25 KA (adjustable type) -03 Nos (c)Digital Ammeter with LED indication lamp with selector switch-1 Nos (d)Digital voltmeterwith LED indication lamp with selector switch -1 Nos |
| 143 | Supply, installation and testing & commissioning ofLT Panelout door type made of 3.15 mm thick CRCA sheet, suitable angle iron frame & PCC, dust & vermin proof , front operated construction, enclosure class -IP 52, CPRI standardincluding copper Bus Barof 600 ampsof suitable length, 3 Phase 50 Hz TPN 4 Nos mounted on suitable type ofinsulators. The metal surface shall be 3.15 mm thicknesshavingpowdercoating with Seimen"s grey colour complete withtop /bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors in front & removable plate at the back to achieve dust and vermin proof panel withall inter connection wiring of suitable size of copper wires, ckt labels etc. Panel shall be comprising ofseperate chambers / modules / compartment to accomodate incomer &outgoing ,MCCB andinstrument chamber comprise of digital type ammeter & voltmeter flush mounted, selector switches, CT"s,etc. The panel board shall be comprising of the following :-Incoming :- (a) MCCB 250 Amp FP 415 V with rupturing cap 50 KA (adjustable type) -01 Nos Outgoing :- (a)MCCB 100Amp FP 415 V with rupturing cap 25 KA (adjustable type) -04 Nos (b)MCCB 63 Amp FP 415 V with rupturing cap 25 KA (adjustable type) -06 Nos (c)Digital Ammeter with LED indication lamp with selector switch-1 Nos (d)Digital voltmeterwith LED indication lamp with selector switch -1 Nos |
| 144 | Supply, installation and testing & commissioning ofLT Panelin door type made of 2 mm thick CRCA sheet, suitable angle iron frame & PCC, dust & vermin proof , front operated construction, enclosure class -IP 52, CPRI standardincluding copper Bus Barof 1000 ampsof suitable length, 3 Phase 50 Hz TPN 4 Nos mounted on suitable type ofinsulators. The metal surface shall be 2.0 mm thicknesshavingpowdercoating with Seimen"s grey colour complete withtop /bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors in front & removable plate at the back to achieve dust and vermin proof panel withall inter connection wiring of suitable size of copper wires, ckt labels etc. Panel shall be comprising ofseperate chambers / modules / compartment to accomodate incomer &outgoing ,MCCB andinstrument chamber comprise of digital type ammeter & voltmeter flush mounted, selector switches, CT"s,etc complete all as specified and directed by Engineer-in-Charge. The panel board shall be comprising of the following :- Incoming :- (a) MCCB 630 Amp FP 415 V with rupturing cap 50KA (adjustable type) -01 Nos Outgoing :- (a) MCCB 400 Amp FP 415 V with rupturing cap 36 KA (adjustable type) -02 Nos (b)MCCB 160 Amp FP 415 V with rupturing cap 25 KA (adjustable type) -02 Nos (c)Digital Ammeter with LED indication lamp with selector switch-1 Nos (d)Digital voltmeterwith LED indication lamp with selector switch -1 Nos |
| 145 | S&F for commissioning & testing ESE based lightining arresstor Model name , Protech Streamer 20 (Protected area 32 meter Radius on Level 1 and 77 meter Radius on Level III ) single spike complete with chemical earthing all connections andacceessories for a range of 25 mtrs complete all as specified and directed by Engineer-in-Charge. |
| 146 | M&L for stranded copper conductor of size 70sqmm single core insulated flexible copper down conductor (cable) fromLightning arrester to Earthing properly fixed with saddles and on insulators complete all as specified and directed by Engineer-in-Charge. |
| 147 | M&L for installtion of GI Mast with insulator and necessary accessories 5 Mtr height incl all necy civil and grouting works, nuts bolts washers complete all as specified and directed by Engineer-in-Charge. |
| 148 | S&F in replacement Lightning Strike Counter ( 6 digit ) incl all connections , fixing on wall etc nuts bolts complete all as specified and directed by Engineer-in-Charge. |
| 149 | S&F in replacement for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm, drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed by Engineer-in-Charge. |
| 150 | M&L for Chemical earthing , Design development supply commissioning and testing EHCC certified ground terminal earthing system hollow tube solid bar CCPRI tested for sensitive signal/Electrical equipments highly anti corrosive long life severe wear conditions in the earth pit and of standardsize ISI marked copper tube out side secondary conductor of 50mm dia and main primary conductor inside 25mm dia 3000mm length ready to install with suitable connecting terminal confirming to IS:3043 1987 specification highly conducive packing material to be filled in earth pits for providing uniform low resistivity anti corrosive hygroscopic medium around the earth system for improving the efficency of current dissipation 20 Kg per bag (3 bag per kit) min or sufficeient quantities required as per site complete incl PCC pits of inside dimension 0.5x0.5x0.5m and suitable cover complete all as specified and directed by Engineer-in-Charge. Note:(i) Rate of Earth work, Earthing electrode, all connections, nut-bolts, washers, complete labour, testing, Earth lead/strip upto 7.5 mtr, char coal dust, common salt, porcelain insulator,PCC earth Pit, CI frame ,RCC cover, funnel with wire mesh are incl in quoted rate andwatering pipe, earth lead protection pipe, test poit, and earth lead exceeding 7.5 mtr are measured and paid separately. |
| 151 | M&L for earthing complete with galvanized steel plate earth electrode 60cmx60cmx6mm thick surrounded by char coal and salt buried directly in ground vertically in pit of depth not less then 2.25 mtr below ground level with top edge of the earth plate at depth of not less then 1.5 mtr below ground level surrounded from all sides by char coal dust and common saltin alternate layersof 15 cm depth and earth plate electrode connected to galvanised earth lead wire of 4.0mm dia at two points by means of GI nuts bolts, check nuts and washers and connected to earthling test point drawn through GI pipe for protection of earth lead wire and arrangement of watering pipe incl PCC earth pit (1:3:6) type C-2 with CI frame andRCC cover all as shown in electrical Plate No 3 on SSR Part-Iincluding testing and dismantling ,taking down old unser earthing complete all as specified and directed by Engineer-in-Charge.Note:(i) Rate of Earth work, Earthing electrode, all connections, nut-bolts, washers, complete labour, testing, Earth lead upto 7.5 mtr, char coal dust, common salt, porcelain insulator, PCC earth Pit, CI frame ,RCC cover, funnel with wire mesh are incl in quoted rate andwatering pipe, earth lead protection pipe, test poit, earth lead exceeding 7.5 mt are measured and paid separately. |
| 152 | All as per item No 151 above but using GI Strip 25x4 mm as earthing lead |
| 153 | M&L for earthing complete with copper plate earth electrode 60cmx60cmx3.15mm thick surrounded by char coal and salt buried directly in ground vertically in pit of depth not less then 2.25 mtr below ground level with top edge of the earth plate at depth of not less then 1.5 mtr below ground level surrounded from all sides by char coal dust and common saltin alternate layersof 15 cm depth and earth plate electrode connected to copper earth lead strip of size 20X3.0 mm at two points by means of GI nuts bolts, check nuts and washers and connected to earthling test point drawn through 40 mm dia GI pipe for protection pipe and arrangement of watering pipe incl PCC earth pit (1:3:6) type C-2 with CI frame andRCC cover all as shown in electrical Plate No 3 on SSR Part-Iincluding testing and dismantling ,taking down old unser earthing complete all as specified and directed by Engineer-in-Charge.Note:(i) Rate of Earth work, Earthing electrode, all connections, nut-bolts, washers, complete labour, testing, Earth lead/strip upto 7.5 mtr, char coal dust, common salt, porcelain insulator,PCC earth Pit, CI frame ,RCC cover, funnel with wire mesh are incl in quoted rate andwatering pipe, earth lead protection pipe, test poit, and earth lead exceeding 7.5 mtr are measured and paid separately. |
| 154 | Supply and fixing in repairof Earth continuity strip or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or fixed on wall with porcelain insulator or any other indicated situation for loop earthing etc. as required 20x3.0mm copper strip complete all as specified and directed by Engineer-in-Charge. |
| 155 | Supply and fixing in repair of Earth continuity GI wire of 4 mm dia or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required complete all as specified and directed by Engineer-in-Charge. |
| 156 | Supply and fixing in repair of Earth continuity strip or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or fixed on wall with porcelain insulator or any other indicated situation for loop earthing etc. as required 25x4 mm GI strip complete all as specified and directed by Engineer-in-Charge. |
| 157 | S&F in repair LED Street Light Luminaries 60 watt fitting aesthetically designed for road lighting, having secondary optics with uniform distribution of light. Pressure die cast aluminum housing powder coated in grey and toughened glass, IP 66 protection, class I with operating voltage range 120 to 270 V including LED driver complete all as specified and directed by Engineer-in-Charge. |
| 158 | S & F in replacement of hot pressedmoulded SMC boxes with hinged door fixing of size 325mm x 220 mmx 150 mm with MS clamp 25 x 3mm made to shape with necessry nuts bolts clamps and washers complete comprising of Aluminium bus bar 63 Amps capacity of suitable size -04 nos mounted over Porcelain insulator with nuts & bolts washers incl MCB SP 6 amps and making incoming and outging connections by taking out loops of cable of any size incl necesary excavations and other civil works complete all as specified and directed by Engineer-in-Charge. |
| 159 | M&L for point wiring with colour coding multistranded copper conductor cable,PVC insulated and (FRLS) unsheathed size 1.5 sqmm with PVC concealedConduit( dia not les than 25 mm) with fixing accessories for one light /fan/bell point controlled by one switchwith pressed steel concealed terminal boxes coveredwith 3mm thick laminated sheet incl. contineous earth wire of PVC insulated unsheathed multi stranded copper conductor cablesize 1.5 Sqmm for earth wire connected to common earth dolly complete all as specified and directed by Engineer-in-Charge. |
| 160 | All as per item No 159 above but for one3/5 pin socket 5 Amp on same board, with 1.5sqmm wire with 1.5sqmm earth wire complete all as specified and directed by Engineer-in-Charge. |
| 161 | All as per item No 159 above but for 3 pins socket outlet 15 Amps independent with 4.0 sq mm incl contineous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sq mm. |
| 162 | S&F switch piano flush type 5 Amps, single pole one way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge. |
| 163 | S&Fsocket 3/ 5 pins, 6 Amp, flush type piano (multi purpose) 230 Volts , AC complete all as specified and directed by Engineer-in-Charge. |
| 164 | S&F ceiling rose, PVC / Polycarbonate isolated body ,surface backlite, 65x50mm,three terminals, 230 Volts , AC complete all as specified and directed by Engineer-in-Charge. |
| 165 | S&FBatten holder PVC/Polycarbonate base / backsuitable for LED lamp. 230 Volts , AC complete all as specified and directed by Engineer-in-Charge. |
| 166 | S&F LED Bulbs 9/10W B-22 Pin type 230 Volts , AC complete all as specified and directed by Engineer-in-Charge. |
| 167 | S&F single pole and neutralsheet metal enclosure with a two pin and earth plug and socket complete with one single pole 20 ampsMCB complete all as specified and directed by Engineer-in-Charge. |
| 168 | S&F LED tube light fittings 20W (4 feet) wall mounted LED batten extruded PVC heat sink provided for efficient heat dissipation & integrated electronic driver optics diffused complete including electrical connection with copper cable from ceiling rose to fittings complete all as specified and directed by Engineer-in-Charge. |
| 169 | S&F LED building secuity light 25 watt made up of pressure die cast aluminium housing with mid power LED as lightening source and PC cover having top opening inbuilt LED driver with IP66 protection and impact resistance of IK-07 complete including GI bracket with nut bolts, washers etc includingelectrical connection with copper cable from ceiling rose to fittings complete all as specified and directed by Engineer-in-Charge. |
| 170 | S & F ofsingle pole and neutral sheet metal enclosures for Distribution board (DB"s)suitable for MCBs fitted with busbar , Neutral link ,Earth Bar and Din rail 240 V, 50 Hz supply double door SP&N DB system 08 ways complete all as specified and directed by Engineer-in-Charge. |
| 171 | S&F RCBOs for earth leakage,over load & short circuit protection2 pole ,25 Amp rating, 300 mA capacity suitablefor 240 Volts complete all as specified and directed by Engineer-in-Charge. |
| 172 | S&F MCB SPN 40-63 Amps 240Vincl all termnials, fitting etc complete all as specified and directed by Engineer-in-Charge. |
| 173 | S&F MCB SP 06 to 40 Amps 240Vincl all termnials, fitting etc complete all as specified and directed by Engineer-in-Charge. |
| 174 | S & F exhaust fans made of PVC plastic body complete with louver shutter of size 300 mm sweep, 1200 RPM, 230 Volt , AC,50 Hzcomplete all as specified and directed by Engineer-in-Charge. |
| 175 | Supply and laying, connecting and testing XLPE underground cableinsulated, and overall sheathed with aluminium conductor heavy duty 1100 volts grade 10 sqmm 2 core laid in trenches/ on poles/ road crossing or passing through existing/new pipe under road crossing, clamping on walletc complete all as specified and directed by Engineer-in-Charge. Note:(i) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highwaysand Aluminium thimbles/lugs are incl in the quoted rates. (ii) All equipments , machinery or toolsif required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost. |
| 176 | Supply and fix water heater storage type ( geyser) electric , capacity 25 Ltrs BEE 5 Star rated complete all as specified and directed by Engineer-in-Charge. |
| 177 | Supply and laying GI pipe line medium grade size 25 mm dia with allfittings like socket of any type, elbow, bend, union, short piece, long screw, flange, cutting & welding as reqd site complete all as specified and directed by Engineer-in-Charge. |
| 178 | Supplyand fixed Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedsize 25 mm (1”)dia complete all as specified and directed by Engineer-in-Charge. |
| 179 | Material and labour for Cutting GI Pipe line of size 50 mm to provide new connection by inserting GI TEE of 50/25 mm including necessary lead joints ,Excavation, returning, filling in of excavated material and inclGI fittingss complete all as specified and directed by Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
