|
| 1 | Excavation in trenches not exceeding 1.5 m wide and and not exceeding 1.5 m depth in loose/soft soil and getting out complete all as specified and directed by Engineer-in-Charge. |
| 2 | Returning, filling in, with excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm, complete all as specified and directed by Engineer-in-Charge. |
| 3 | Removal of surplus soil to distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed by Engineer-in-Charge. |
| 4 | M & Lfor brick protection with sub class \"B\" brickslaid dry flat over electric cable in trenches complete all as specified and directed by Engineer-in-Charge. |
| 5 | M & Labour for sand cushioning with a layer of sand 80mm thickconsolidated before laying of cable and 150mm thickconsolidated after laying of cable in trenches ducts for electric cable protection including consolidation complete all as specified and directed by Engineer-in-Charge. |
| 6 | M&L for taking down old unsv LT cable any typesize / type complete all as specified and directed by Engineer-in-Charge. |
| 7 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core complete all as specified and directed by Engineer-in-Charge. |
| 8 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core complete all as specified and directed by Engineer-in-Charge. |
| 9 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core complete all as specified and directed by Engineer-in-Charge. |
| 10 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed by Engineer-in-Charge. |
| 11 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L for Design, development, supply commissioning and testingEHCC certified ground tubular effective chemical earthing system (CPRI tested for 15 KA current capacity for LT Iine) highly anticorrosive long life electrode with and including adequate protective coating to withstand servereweatherconditions in the earth pit of the standard size comprising of 40mm x 3m Long Copper rod as primary conductor and hollow copper tube of 80mm x 3m long as secondary conductor to install with suitable connecting terminal confirmingof IS 3043 : 1987 specification, highly conductive packing material to be filled in earth pits for providing uniform, low resistivity anticorrosive, hygroscopic medium around the earth system for improving the efficiency of current dissipation with crystalline conductive mixture (CCM)20 Kg per bag (3 bag per kit) minimum or sufficientquanitities required as per site complete including RCC earthing pitcover , material and labour complete all as specified and directed by Engineer-in-Charge. |
| 13 | Supply and fix in replacementAdjustable type MCCB 630 Amps ,3 Pole ,36 KA ,50 Hz ,415 Voltincluding under voltage/over voltage relay,adjustable overload setting and short circuit setting complete all as specified and directed by Engineer-in-Charge. |
| 14 | Supply and fix in replacementAdjustable type MCCB 400 Amps ,4 Pole ,36 KA ,50 Hz ,415 Voltincluding under voltage/over voltage relay,adjustable overload setting and short circuit setting complete all as specified and directed by Engineer-in-Charge. |
| 15 | Supply and fix in replacementAdjustable type MCCB 315 Amps ,4 Pole ,36 KA ,50 Hz ,415 Voltincluding under voltage/over voltage relay,adjustable overload setting and short circuit setting complete all as specified and directed by Engineer-in-Charge. |
| 16 | Supply and fix in replacement Adjustable type MCCB 250 Amps ,4 Pole ,25 KA ,50 Hz ,415 Voltincluding under voltage/over voltage relay,adjustable overload setting and short circuit setting complete all as specified and directed by Engineer-in-Charge. |
| 17 | Supply and fix in replacementAdjustable type MCCB 200 Amps ,4 Pole ,25 KA ,50 Hz ,415 Voltincluding under voltage/over voltage relay,adjustable overload setting and short circuit setting acomplete all as specified and directed by Engineer-in-Charge. |
| 18 | Supply and fix in replacementAdjustable type MCCB 125 Amps ,4 Pole ,25 KA ,50 Hz ,415 Voltincluding under voltage/over voltage relay,adjustable overload setting and short circuit setting complete all as specified and directed by Engineer-in-Charge. |
| 19 | Supply and fix in replacement Adjustable type MCCB 63 Amps ,4 Pole ,16 KA ,50 Hz ,415 Voltincluding under voltage/over voltage relay,adjustable overload setting and short circuit setting complete all as specified and directed by Engineer-in-Charge. |
| 20 | Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½XLPE, armoured, Al conductor cable of size 70 to 95 sqmm,Outdoor type complete all as specified and directed by Engineer-in-Charge. |
| 21 | Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½XLPE, armoured, Al conductor cable of size 16 to 35 sqmm,Outdoor type complete all as specified and directed by Engineer-in-Charge. |
| 22 | Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½XLPE, armoured, Al conductor cable of size 300 to 400 sqmm,Outdoor type complete all as specified and directed by Engineer-in-Charge. |
| 23 | Supply and fix in repair on load changeover switch 630 amp 4 pole,415 V,50 Hz in sheet steel enclosure forsurface mounting with padlocking facilitywith the connecting accessories complete all as specified and directed by Engineer-in-Charge. |
| 24 | Supply and fix in repair on load changeover switch 400 amp 4 pole,415 V,50 Hz in sheet steel enclosure forsurface mounting with padlocking facilitywith the connecting accessories complete all as specified and directed by Engineer-in-Charge. |
| 25 | Supply, installing testing and commissioning in replacement of factory made and tested(Including CPRI test cetified) indoortype floor mountedLTpanel board, cubical type suitable for 415 Volts 3 phase, 4 wire 50Hz, Ac supply system having busbar chamber with insulated AL busbar of rating 1.5 times the incomer MCCB for phaseinstalled on porcelin/SMC insulators. The panel shall be dust and vermin proof IP-64 class protection and made out of 3.15 mm thickCRCA MS sheet and angle iron frame 40x 40x 6mm thick frame work, powder coated finish over one coat of red oxide primer on outside surface and painted inside with two coat of red oxide primer, front and back opening type with aproaches for cable entry with double door shutter and locking arrangementsincluding internal wiring with PVC insulated stranded copper conductor cable FRLS IS 694 sheathed 1100V grade of appropriate sizecomprising of following:-INCOMING-(i) Mains MCCB 4 pole 400 Amps 50 KA with adjustable setting, 415 Volts with breaking capacity 36 KA. -01 No.(ii) Digital type voltmeter 0-500 volts and with selector switch-01 No.(iii) Digital Amp meterwith CTs & built in selector switch-01 No.(iv) Indication lamp RYB-01 Set.OUTGOING-(i) MCCB 3 pole 200 Amps,, 415 Volts with breaking capacity 36 KA.-02 No.(ii)MCCB 3 pole 125 Amps, 415 Volts with breaking capacity 25 KA.-01 No. |
| 26 | M&L for Dehydration includingfilteration and cleaning of transformer oil bycentifugal dehydration machine till to achieve Di-electric strength 55 KV at 2.5 mm gap testing of sample before and after dehydration and filteration complete all as specified and directed by Engineer-in-Charge.NOTE:- Contractor hasto arrange the dehydration machine and testing kit withoutany extra cost to the deptt. Test report to be submitted after completion of job. |
| 27 | Supply & Filling /pouring of transformer oil of low viscosity having dielectric strength not less than 60 KV complete all as specified and directed by Engineer-in-Charge.NOTE:-Dielectric strength test shall be carried out at site before poring/filling in transformers in the presence of Engr-in-Charge on the site. |
| 28 | Repair maintainance of oil cooled servo voltage stablizer of capacity 400 KVA to 630KVA 3 phase by isolating , disconnecting of input/output ,supply cable,opening of top of voltage stablizer,detecting of fault ,u/s component in control panel /dimmerstat /PCB etc,cleaning of serviceable parts /component complete all as specified and directed by Engineer-in-Charge.Note:- The replacement spare parts shall be measured and paid separately. |
| 29 | Supply Only spare part of the Voltage stablizer 100 to 250 KVA KVA complete all as specified and directed by Engineer-in-Charge as following:- |
| 30 | RC Network |
| 31 | AC Synchronous Motor 10 Kg |
| 32 | Spring loaded finger |
| 33 | Microproccessor Based eletronic control board |
| 34 | Rewinding of Auto Transformer,50-100 KVA |
| 35 | Selector switch |
| 36 | Voltmeter digital type |
| 37 | Amperemeter digital type |
| 38 | S&F in replacement MCB TPN 40 Amps,415 volts curve \"C\",breaking capacity 10KA,complete all as specified and directed by Engineer-in-Charge. |
| 39 | S&F in replacement MCB TPN 63 Amps,415 volts curve \"C\",breaking capacity 10KA,complete all as specified and directed by Engineer-in-Charge. |
| 40 | M&L danger notice board/plate of 1.6mm thick mild steel sheet vitreous enameled white with letter, figures and conventional skull and bones in signal red colour and fixed with MS clamps, nutsand bolts of approved size of HT 25 x 20 cm size complete all as specified and directed by Engineer-in-Charge. |
| 41 | S & F rubber insulation mat of size 1.8 mtr x0.9mtr wide 19mm thick red colour ISI marked embozzed for up to 15 KV complete all asspecifiedand as directed by Engineer-in-Charge. |
| 42 | M & L for Repair and Maintenance ofsplit type AC\"s of capacity 1.5/2 TR comprising of the following tasks installed at different locations includingtesting complete all as specified and directed by Engineer-in-Charge.(a) Inspecting and checking the Indoor/outdoor units for noise free operation (b)Checking the electrical connection for tightness (c) Cleaning the condenser with cleaning agent followed with pressurized water and cleaning the cooling coil with air blower.(d) Greasing/Oiling of condenser fan motor and blower motor. (e)Checking for any refrigerant leakage. (f) Checking for serviceability of remote control unit. |
| 43 | Supply and fixing in replacement of starting capacitor 80-100/100-120 mfd for split type A/C\"s of capacity2 TR complete all as specified and directed by Engineer-in-Charge. |
| 44 | M & L for Disconnecting and taking down burnt compressor of capacity 2TR from split type AC unit and Supply and Fix new reciprocating type compressor with charging of refrigerent (R410A,R32,R134A)after dehydration testing and vaccummingone as per existing model complete including testing complete all as specified and directed by Engineer-in-Charge. |
| 45 | M & L for Disconnecting and taking down burnt compressor of capacity 2TR from split type AC unit and Supply and Fix new rotary type compressor with charging of refrigerent after dehydration testing and vaccummingone as per existing model complete including testing complete all as specified and directed by Engineer-in-Charge. |
| 46 | M & L for Disconnecting and taking down burnt compressor of capacity 1.5 TRwith CFC free Refrigerent (R410a,R32) from split type AC unit and Supply and Fix new rotary/reciprocating type compressor with charging of refrigerent after dehydration testing and vaccummingone as per existing model complete including testing complete all as specified and directed by Engineer-in-Charge. |
| 47 | M&L for repair to gas leakage of split type AC unit of capacity 1.5/2TR capacity including pressure testing, dehydration and gas charging complete all as specified and directed by Engineer-in-Charge. |
| 48 | Taking out unserviceable PCB from1.5 /2 TR split type A/C unitand refixing the serviceable PCB after repair from workshop complete testing complete all as specified and directed by Engineer-in-Charge. |
| 49 | Taking out unserviceable PCB from1.5 /2 TR inverter split type A/C unitand refixing the serviceable PCB after repair from workshop complete testing complete all as specified and directed by Engineer-in-Charge. |
| 50 | M&L for replacement of unserviceableinverter type PCB from the existing inverter split type A/C unit1.5/2.0Ton complete of existing make ,testingall as specified and directed by Engr-in-charge. |
| 51 | Supply and charging Refrigerant(R410,R32,R134 and existing refrigerent) to any type of AC unit including CFC free and non CFC Free AC complete all as specified and directed by Engineer-in-Charge. |
| 52 | M&L in replacement of copper tubing 10mm outer dia suitable for AC 2TR capacity complete all as specified and directed by Engineer-in-Charge. |
| 53 | M&L in replacementcopper tubing 15mmouter diacomplete all as specified and directed by Engineer-in-Charge. |
| 54 | M & L for Dismantling of Split type AC 1.5/2.0 TR capacity from position after including disconnecting all connections between indoor and out door units,shifting,backup refrigerant for reuse and install at a place where directed carefully,including cutting on wall,making hole and make good disturbed surface properly matching surface,inspecting,servicing and refilling refrigerant and testing complete all as specified and directed by Engineer-in-Charge. |
| 55 | M & L for the nitrogen pressure testing after installation of condenser coil of 5.5 TR split AC and complete pressure testing for the no leakage confirmation complete all as specified and directed by Engineer-in-Charge. |
| 56 | M&L for gas leakgae detection includingdehydration of complete 5.5 TR split AC and vaccuming the system with vaccume pump and recharging the suitable refrigerent complete all as specified and directed by Engineer-in-Charge. |
| 57 | M & L for Taking out the unserviceable condensor motorof 5.5 ton AC and S&F thenew condenser motor of 5.5 TR split AC of existing makecomplete all as specified and directed by Engineer-in-Charge. |
| 58 | M & L for Disconnecting and taking down burnt compressor of capacity 5.5 TR from ductable split type unit and Supply and Fix new compressor of exsiting make with charging of refrigerent after dehydration testing and vaccummingone as per existing model complete including testing complete all as specified and directed by Engineer-in-Charge. |
| 59 | M & L for Taking out unserviceable indoor unit and supply and fix the newindoor unit of 2 TR capacity split AC 230 Volts single phase including installing ,charging complete all as specified and directed by Engineer-in-Charge. |
| 60 | M&L for Disconnecting and taking down burnt compressor of capacity 1.5TR from split type AC unit and Supply and Fix new inverter type compressor with charging of refrigerent (R410A,R32, R134A) after dehydration testing and vaccummingone as per existing model complete including testing complete all as specified and directed by Engineer-in-Charge. |
| 61 | M&L for Disconnecting and taking down burnt compressor of capacity 2TR from split type AC unit and Supply and Fix new inverter type compressor with charging of refrigerent (R410A,R32, R134A) after dehydration testing and vaccummingone as per existing model complete including testing complete all as specified and directed by Engineer-in-Charge. |
| 62 | Supply and fix in replacement copper condensor coil for split AC 2 TR complete all as specified and directed by Engineer-in-Charge. |
| 63 | Supply and fix in replacement copper condensor coil for split AC 1.5 TR complete all as specified and directed by Engineer-in-Charge. |
| 64 | Supply and fix in replacement copper evaporatercoil for split AC 2 TR complete all as specified and directed by Engineer-in-Charge. |
| 65 | Supply and fix in replacement copper evaporater coil for split AC 1.5 TR complete all as specified and directed by Engineer-in-Charge. |
| 66 | Supply and fixing contactor 63 Amp 3 pole for time switch astro type/Nature switch fitted inside box complete with all electrical connection after dismantling old one complete all as specified and directed by Engineer-in-Charge. |
| 67 | Suply and fix in replacement of Sheet metal enclosure for MCCB 3P, one No complete all as specified and directed by Engineer-in-Charge. |
| 68 | S&F in repair floor mounted TPN busbar chamber factory made with busbar of current rating 400 Amp, 415, 4 way complete all as specified and directed by Engineer-in-Charge. |
| 69 | M&L for scrapping of surface of steel tubular poles of any size with emery paper and painting of pole one coat of primer and two coats of silver colourpaintincluding writing pole No on yellow colour with 30cm strip upto 1.5 Mtr height from ground level complete all as specified and directed by Engineer-in-Charge. |
| 70 | Supply and fix in replacement of Onload Changover switch 200 Amp, 4 pole ,415 V,50 Hz in sheet metal enclosure complete all as specified and directed by Engineer-in-Charge. |
| 71 | Supply and fix in replacement of Onload Changover switch 400 Amp, 4 pole ,415 V,50 Hz in sheet metal enclosure complete all as specified and directed by Engineer-in-Charge. |
| 72 | Supply and fixedin repair,MCCB 125 Amp,3 pole, adjustable type ,25KA including under voltage/over voltage relay complete all as specified and directed by Engineer-in-Charge. |
| 73 | Supply and fixedin repair,MCCB 400 Amp,3 pole,adjustable type ,36 KA including under voltage/over voltage relay complete all as specified and directed by Engineer-in-Charge. |
| 74 | Supply and fix steel pole tubular swaged 9 metres long complete with cast iron base plate , finialtaper plug , bolts , nuts and screws as specified type 410 SP-22complete all as specified and directed by Engineer-in-Charge. |
| 75 | M & L cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate for pole pedestal (PCC) including necessary form work etc complete all as specified and directed by Engineer-in-Charge. |
| 76 | M & Lcement concrete in foundation filling and mass concrete type B2 1;2;4 (40mm graded aggregate) complete all as specified and directed by Engineer-in-Charge. |
| 77 | M & Lcement concrete in foundation filling and mass concrete type B2 1:4:8 (40mm graded stone aggregate) complete all as specified and directed by Engineer-in-Charge. |
| 78 | Taking down unserviceable street light fitting from fixed type high mast pole 16 to 25mtrs /LED Street Light fitting/Flood light Fitting of any size from the pole/bldg and kept in safe custody for refixing or for schedule of credit to contractor complete all as specified and directed by Engineer-in-Charge. Note : All T&P ie ladder,Tools,Safty glooves etc will be provided by the contractor without any extra cost |
| 79 | Refixing and reconnecting up complete to fixed type high mast pole 16 to 25mtrs LED street light/Flood light fitting after rectification of defects in wiring of the fitting in an including replacement of holders, PVC connector, ballast, ignitor, condesor and lamp and making electric connection with PVC unsheathed wire withold or new conductor withOH line or Bus bar box complete all as specified and directed by Engineer-in-Charge.Note : All T&P ie ladder,Tools,Safty glooves etc will be provided by the contractor without any extra cost |
| 80 | Taking down unserviceable street light fitting upto 11 mtrs /LED Street Light fitting/Flood light Fitting of any size from the pole/bldg and kept in safe custody for refixing or for schedule of credit to contractor complete all as specified and directed by Engineer-in-Charge.Note : All T&P ie ladder,Tools,Safty glooves etc will be provided by the contractor without any extra cost |
| 81 | Refixing and reconnecting up complete LED street light/Flood light fitting after rectification of defects in wiring of the fitting in an including replacement of holders, PVC connector, ballast, ignitor, condesor and lamp and making electric connection with PVC unsheathed wire withold or new conductor withOH line or Bus bar box complete all as specified and directed by Engineer-in-Charge. Note : All T&P ie ladder,Tools,Safty glooves etc will be provided by the contractor without any extra cost |
| 82 | Supply and fixing automatic street light prewired switch using nature switch for automatic switching of street light based on lux level of nature light.THE SENSOR (NATURE SWITCH) alongwith power contactor for 25 KW 3 phase,MCB pole/wall mountable enclosure made of rust proof electric shock proof terminal proof and FR grade special moulding compound junction box confirming to IP54 with all other accessoried ie lugs cable connedtion etc complete all as specified and directed by Engineer-in-Charge. |
| 83 | Supply and fix in replacement post top lantern LED 40 W or next highest wattage having IP65 protction for single phase connection 50 Hz 230 Volts complete all as specified and directed by Engineer-in-Charge. |
| 84 | S& fixing LED flood light luminarie70 W with high pressure die cast housing acting as heat sink in order to ensure better performance having IP66 ingress protection acomplete all as specified and directed by Engineer-in-Charge.Note : All T&P ie ladder,Tools,Safty glooves etc will be provided by the contractor without any extra costto height upto 25 mtr |
| 85 | S& fixing LED flood light luminarie120 W with high pressure die cast housing acting as heat sink in order to ensure better performance having IP66 ingress protection complete all as specified and directed by Engineer-in-Charge.Note : All T&P ie ladder,Tools,Safty glooves etc will be provided by the contractor without any extra cost to height upto 25 mtr |
| 86 | S& fixing LED flood light luminarie200 W with high pressure die cast housing acting as heat sink in order to ensure better performance having IP66 ingress protection complete all as specified and directed by Engineer-in-Charge. |
| 87 | Supply and Fixing LED street light fitting 45 Watt pressure die case aluminium housing LED street light luminaires suitable for existingstreet light pole including all fixing accessaries complete all as specified and directed by Engineer-in-Charge. |
| 88 | Supply and Fixing LED street light fitting 60 Watt pressure die case aluminium housing LED street light luminaires suitable for existingstreet light pole including all fixing accessaries complete all as specified and directed by Engineer-in-Charge. |
| 89 | Supply and fixin replacement LED bollard fitting 9 Watt with luminaire with MS Pipe housing with glare free PMMA diffuser , IP65 of height 800 mm suitable for single phase connection 50 Hz 230 Volts complete all as specified and directed by Engineer-in-Charge. |
| 90 | Supply and fix single phase driver for LED street light / flood light of 45 to 200 watt capacity and compatible with existing street light/ flood light any type / any rating complete all as specified and directed by Engineer-in-Charge. |
| 91 | S&F in replacement street light GI pipe bracket 50 mm dia 1.50metre length (ISI marked) light grade bend to shape with two Nos MS clamp duly painted nuts and bolts etc complete all as specified and directed by Engineer-in-Charge. |
| 92 | Supply and fix in replacement non-metallic junction box/street light boxwith three phase aluminium bus bar of suilable for 415 Volt , 50 Hz electric supplyconforming to IP65 wall / pedestral mounted and including MCB SPN 06 Amps complete all as specified and directed by Engineer-in-Charge. |
| 93 | Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½XLPE, armoured, Al conductor cable of size 16 to 35 sqmm,Outdoor type complete all as specified and directed by Engineer-in-Charge. |
| 94 | Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½XLPE, armoured, Al conductor cable of size 70 to 95 sqmm,Outdoor type complete all as specified and directed by Engineer-in-Charge. |
| 95 | Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½XLPE, armoured, Al conductor cable of size 150 to 185 sqmm,Outdoor type complete all as specified and directed by Engineer-in-Charge. |
| 96 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape with galvanised steel wire or tape and overall PVC sheathed4 core 10 sq. mm nominal cross section in service connections complete all as specified and directed by Engineer-in-Charge. |
| 97 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape with galvanised steel wire or tape and overall PVC sheathed2 core 6 sq. mm nominal cross section in service connections complete all as specified and directed by Engineer-in-Charge. |
| 98 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size70 sq mm 3.5 core complete all as specified and directed by Engineer-in-Charge. |
| 99 | Excavation in trenches not exceeding 1.5 m wide and and not exceeding 1.5 m depth in loose/soft soil and getting out complete all as specified and directed by Engineer-in-Charge. |
| 100 | Returning, filling in, with excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm, complete all as specified and directed by Engineer-in-Charge. |
| 101 | Removal of surplus soil to distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed by Engineer-in-Charge. |
| 102 | M & Lfor brick protection with sub class \"B\" brickslaid dry flat over electric cable in trenches complete all as specified and directed by Engineer-in-Charge. |
| 103 | M & Labour for sand cushioning with a layer of sand 80mm thickconsolidated before laying of cable and 150mm thickconsolidated after laying of cable in trenches ducts for electric cable protection including consolidation complete all as specified and directed by Engineer-in-Charge. |
| 104 | Supply and fixing in repair/replacement of solar street light fittings with integrated 12 Watt LED street light system with solar PV Panel 100 WP, integrated LED fitting with Li-Ion Battery 11.1 V 17 Ah , MPPT based solar charge controller,Motion Sensor and tubular pole of height 5 mtrs complete all as specified and directed by Engineer-in-Charge. |
| 105 | Supply and fix in replacement hot dip galvanized decorative pole 6 m height dual arm light fitting outdoor type including 50 watt luminaire with IP66 ratingcomplete all as specified and directed by Engineer-in-Charge. |
| 106 | Supply and fix in repairBLDC fan Energy Efficicent ceiling fan Sweep size 1200mm with speed 350 RPM motor air delivery 220 CMM input power 28W-32W and having remote control complete all as specified and directed by Engineer-in-Charge. Note:- OLD fan need to deposit in store no credit will be provided for the same. |
| 107 | M&L for servicing and maintenance of high mast pulley and GI wire rope system oilling, greasing etc for smooth functioning of the lowering mechanish complete all as specified and directed by Engineer-in-Charge. |
| 108 | M&L for rewinding of 0.5 Hp to 1 HP motor of high mast complete all as specified and directed by Engineer-in-Charge. |
