Assam Rifles-AR has published Tender For Repair/Replacement Of Sm Bks At Ar Bn Charduar. Submission Date for this Tender is 17-02-2024. Electrification Work Tenders in Sonitpur Assam. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Schedule "A" Part - I (Special Repair to 142 Nos type-II md accn) |
2 | Removing dry or oil bound distemper, water proofing cement paintand the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
3 | Distempering with oil bound washable distemper of approved brandand manufacture to give an even shade : Old work (one or more coats) |
4 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm)over existing cement paint surface |
5 | Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. |
6 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work (wooden surface) |
7 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of thickness 4 mm |
8 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work (Steel Surface) |
9 | Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622, of approved make, in all colours andshades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarsesand), including grouting the joints with white cement and matching pigments etc., complete. |
10 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
11 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
12 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
13 | Providing and fixing toilet paper holder : C.P. brass |
14 | Providing and fixing P.V.C. low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White |
15 | Providing and laying damp-proof course 40 mm thick with cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size). |
16 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green, black of any size asapproved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
17 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. |
18 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills , facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
19 | Polyethylene water storage tank with cover and suitable locking arrangement |
20 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.25mm nominal bore, weighing not less than 62 gms |
21 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. |
22 | M&L for Granite of any colour, 18 mm thick (slab area upto 0.50 sqm) |
23 | Rewiring for light point/fan pt/exhaust fan pt/call bell point/5 Amp socket pt with 1.5 sqm FR PVC insulated copper conductor single core cable and 1.5 sqmm FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduil including dismantling as reqd. |
24 | Supply and fixing phenolic laminated sheet cover for existing recessed GI box Size 4" x 4" |
25 | As per item No 2.23 but Size 4" x 6" |
26 | As per item No 1.23 but Size 4" x 10" |
27 | Supply and fixing following Piano type switch/socket on the existing switch box/ cover including connection etc as reqd 5/6 switch |
28 | Dittobut 3 Pin 5/6 amp socket |
29 | Ditto but 15/16 Amp Socket |
30 | Ditto but A15/16 Amp switch |
31 | Schedule "A" Part - II (Repair/Replacement of type-III 06 block (36 Nos Md accn) |
32 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : Old work (one or more coats) |
33 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm)over existing cement paint surface |
34 | Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. |
35 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work (wooden surface) |
36 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of thickness 4 mm |
37 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work (Steel Surface) |
38 | Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622, of approved make, in all colours andshades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarsesand), including grouting the joints with white cement and matching pigments etc., complete. |
39 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
40 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
41 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
42 | Providing and fixing toilet paper holder : C.P. brass |
43 | Providing and fixing P.V.C. low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White |
44 | Providing and laying damp-proof course 40 mm thick with cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size). |
45 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green, black of any size asapproved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
46 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. |
47 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills , facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
48 | Polyethylene water storage tank with cover and suitable locking arrangement |
49 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.25mm nominal bore, weighing not less than 62 gms |
50 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. |
51 | M&L for Granite of any colour, 18 mm thick (slab area upto 0.50 sqm) |
52 | Rewiring for light point/fan pt/exhaust fan pt/call bell point/5 Amp socket pt with 1.5 sqm FR PVC insulated copper conductor single core cable and 1.5 sqmm FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduil including dismantling as reqd. |
53 | Supply and fixing phenolic laminated sheet cover for existing recessed GI box Size 4" x 4" |
54 | As per item No 2.22 but Size 4" x 6" |
55 | As per item No 2.22 but Size 4" x 10" |
56 | Supply and fixing following Piano type switch/socket on the existing switch box/ cover including connection etc as reqd 5/6 switch |
57 | Supply and fixing 3 Pin 5/6 amp socket |
58 | Supply and fixing 15/16 Amp Socket |
59 | Supply and fixing 15/16 Amp switch |
60 | Cutting of Exhaust fan hole and S&F Exhaust fan 400 mm dia in theKitchen and toilets making good as per direction of Engr in charge |
61 | Schedule "A" Part - III (Repair/Replacement of type-IV-08 Md accn, Single Offr-06 Nos and Offrs Mess) |
62 | Removing dry or oil bound distemper, water proofing cement paintand the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
63 | Distempering with oil bound washable distemper of approved brandand manufacture to give an even shade : Old work (one or more coats) |
64 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (two or more coats applied @ 1.43 ltr/10 sqm) over existing cement paint surface |
65 | Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. |
66 | Painting with synthetic paint of approved brand and manufacure of required colour to give and even shade. One or more coats on old work |
67 | Varnishing with varnish of approved brand and manufacture: One or more coats with copal varnish |
68 | Providing and fixing C.P. brass long body bid cock of approved quality conforming to IS standards and weighing not less than 690gms. 15mm nominal bore |
69 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
70 | Providing and fixing toilet paper holder : C.P.brass |
71 | Providing and fixing P.V.C low level flushing cistern with manually controleed device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity -White |
72 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
73 | Chequered precast cement concrete tiles 22mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, incl rubbing and cleaning etc, complete, on 20mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand). Dark shade pigment using ordinary cement |
74 | Providing corrugated G.S sheet 0.63mm roofing incl vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
75 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level : 1:2:4 (1 Cement: 2 coarse and : 4 graded stone aggregate 20mm nominal size) |
76 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement:4 coarse sand), including grouting the joints with white cement and matching pigments etc. complete |
77 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 25 mm thick |
78 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness tobe specified by the manufacture), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement:3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
79 | Providing and laying rectified glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 cement:4 coarse sand) including grouting the joints with white cement and matching pigments etc, complete. |
80 | Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar location s of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, kixed with matching pigment, expoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. Complete at all levels |
81 | Polyethlene water storage tank with cover and suitable locking arragement |
82 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.25mm nominal bore, weighing not less than 62 gms |
83 | Schedule "A" Part - IV (Special repair of 09 blocks of all SM Barracks) |
84 | Distempering with oil bound washable distemper of approved brandand manufacture to give an even shade : Old work (one or more coats) |
85 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm)over existing cement paint surface |
86 | Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. |
87 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work (wooden surface) |
88 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of thickness 4 mm |
89 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work (Steel Surface) |
90 | Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622, of approved make, in all colours andshades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarsesand), including grouting the joints with white cement and matching pigments etc., complete. |
91 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
92 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
93 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
94 | Providing and fixing toilet paper holder : C.P. brass |
95 | Providing and fixing P.V.C. low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White |
96 | Providing and laying damp-proof course 40 mm thick with cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size). |
97 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green, black of any size asapproved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
98 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. |
99 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills , facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
100 | Polyethylene water storage tank with cover and suitable locking arrangement |
101 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.25mm nominal bore, weighing not less than 62 gms |
102 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. |
103 | M&L for Granite of any colour, 18 mm thick (slab area upto 0.50 sqm) |
104 | Rewiring for light point/fan pt/exhaust fan pt/call bell point/5 Amp socket pt with 1.5 sqm FR PVC insulated copper conductor single core cable and 1.5 sqmm FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduil including dismantling as reqd. |
105 | Supply and fixing phenolic laminated sheet cover for existing recessed GI box Size 4" x 4" |
106 | Supply and fixing phenolic laminated sheet cover for existing recessed GI box Size 4" x 6" |
107 | Supply and fixing phenolic laminated sheet cover for existing recessed GI box Size 4" x 10" |
108 | Supply and fixing following Piano type switch/socket on the existing switch box/ cover including connection etc as reqd 5/6 switch |
109 | Ditto but 3 Pin 5/6 amp socket |
110 | Ditto but 15/16 Amp Socket |
111 | Ditto but 15/16 Amp switch |
112 | cutting of Exhaust fan hole and Exhaust 400 mm in thebath and toilets making good as per direction of Engr in charge |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail