Public Works Department-PWD has published Tender For Construction Of Cement Concrete Pavement Road In Mariyang Township Of Upper Siang District ( Ph-I ). Submission Date for this Tender is 16-02-2024. Road Work Tenders in Upper Siang Arunachal Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 14-Feb-2024 | Technical Corrigendum | Technical Bid | 16-02-2024 |
Sl. No. | Item Description |
1 | SH:Earthwork in Widening and filling(1km) |
2 | Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres |
3 | Excavation in hilly area in ordinary rock not requiring blasting by mechanical means including cutting and trimming of slopes and disposal of cut material with all lift and lead upto 1000 metres. |
4 | SH:Dismantling (3.5km) |
5 | Dismantling of Flexible Pavements (Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately) A. By Manual Means |
6 | SH: Sub-Grade, GSB,DLC, CC Pavement & Road Marking width 5.50m. SH:SUBGRADE & WBM(3.5KM) |
7 | Preparation of sub grade (Preparation of sub grade by excavating earth to an average depth of 22.50 cm, dressing to camber and consolidating with road roller, making good the undulations etc. and disposal of surplus earth, lead upto 50 m.) |
8 | SH :-Granular Sub-base By Mix in Place Method (Construction of granular sub- base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401) (I) for grading- IMaterial |
9 | Dry Lean Cement Concrete Sub- base (Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.) |
10 | SH: C.C. PAVEMENT(3.5km) Centring and shuttering including strutting,propping etc and removal of form work for : a) Foundation, footings, bases of columns etc. and mass concrete. |
11 | Providing and laying in 1000 G polythene film below cc pavement with suficient overlap of 1.5ft copmlet as /Relevant Specification. |
12 | Cement Concrete Pavement (Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing ) Mix Design M35 |
13 | Reinforcement For Dowels Bars of CC pavment work including bending, binding and placing in position complete. TMT, Fe-500 b) Cold Twisted bars |
14 | Providing and laying in position bitumen hot sealing compound for expansion joints etc. 6mmx50mm Using grade "A" sealing compound Carriage Width 5.50m CC Pavement |
15 | SH: ROAD MARKING Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces) |
16 | SH: Slab Culvert 1 mtr span(8 Nos) |
17 | Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification,including setting out,construction of shoring and bracing,removal of stumps and other deleterious matter,dressing of sides and bottom and backfilling with approved material. I. Ordinary soil A. ManualMeans (i) upto 3 m depth |
18 | PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed,placed in foundation and compacted by vibration including curing for 14 days.) |
19 | Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and Technical Specifications Coursed rubble masonry (first sort ) |
20 | Plain/Reinforced cement concrete in sub-structure complete as per drawing and technical specifications PCC Grade M20 Height upto 5m |
21 | Furnishing and Placing Reinforced / Prestressed cement concrete in super-structure as per drawing and Technical Specification RCC Grade M20 Using Concrete Mixer For solid slab super-structure,20-30% of (a+b+c) Height upto 5m |
22 | Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications |
23 | Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment,wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technicals |
24 | Back filling behind abutment,wing wall and return wall complete as per drawing and Technical specification a)Granular material |
25 | SH: Retaining Wall 3.00 Height 10.00 Length(472m) |
26 | Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification,including setting out,construction of shoring and bracing,removal of stumps and other deleterious matter,dressing of sides a I. Ordinary soil A. Manual Means (i) upto 3 m depth |
27 | Providing and laying in foundations and plinth cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering. |
28 | Centring and shuttering including strutting,propping etc and removal of form work for : (b) a) Foundation, footings, bases of columns etc. and mass concrete. |
29 | Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications PCC grade M20 Height upto 5m |
30 | Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications |
31 | Back filling behind abutment,wing wall and return wall complete as per drawing and Technical specification. Granular material |
32 | SH:-Side Drain 1km |
33 | Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification,including setting out,construction of shoring and bracing,removal of stumps and other deleterious matter,dressing of sides and bottom with backfilling of approved materials) I. Ordinary soil A. Manual Means (i) upto 3 m depth |
34 | Providing and laying in foundations and plinth cement concrete 1 : 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering. |
35 | Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in: a) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level. |
36 | 12mm cement plater 1:4 (1 cement : 4 fine sand) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail