Tender For Replacement Of Existing Ac Pipe To 200Mm Di And 150Mm Dia Gipipe And Specials At Anaimalai Pumphouse To Sethumadai Road, Chinnappampalayam Road And Sullimettupathi Hamletin Odayakulam Town Panchayat, Coimbatore-Tamil Nadu
TDR : 41987108
Tender Notice
BOQ
Expired
Coimbatore
Tamil Nadu
Tender For Replacement Of Existing Ac Pipe To 200Mm Di And 150Mm Dia Gipipe And Specials At Anaimalai Pumphouse To Sethumadai Road, Chinnappampalayam Road And Sullimettupathi Hamletin Odayakulam Town Panchayat
Name of Work: Replacement of Existng AC pipe to 200mm DI and 150mm Dia GIPipe and specials at Anaimalai Pumphouse to sethumadai Road,chinnappampalayam Road and sullimettupathi Hamletin Odayakulam Town panchayat
Sl. No.
Item Description
1
Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS 20 B For 1st depth of 0m to 2 m
2
Supply and delivery of GIpipes as per IS Specificationincluding loading, unloading, freight stacking, conveyance to the work site etc., complete 200MM DI pipe
3
150MM GIPipe B Class
4
CI SLUICE VALVES NON RAISING SPINDLE TYPES TO PRESSURE RATING OF 1.6 PN TO BE USED IN PUMP HOUSES (LONG BODY/ LONG FACE TO FACE)Conforming to IS AND WITH 5 YEARS WARRANTY Sluice valve ( 200 mm dia. )
5
Sluice valve( 150 mm dia. )
6
Supply and delivery of Cast Iron doubleAir valveincluding specials as per IS 14845/2000 PN 1.0 with ISI marking and with 5 years warranty suitable for use in water supply main including, loading, freight, unloading insuranceall taxes and stocking at site. including cost of Specials and all the incidental charges etc., complete and as directed by Departmental officers.Air valve ( 200 mm dia. )
7
Air valve ( 150 mm dia. )
8
Lowering the following pipes and specials to trench and laying to proper grade and alignment as per standard specifications 200MM DI pipe
9
150MM GIPipe B Class
10
Supply and delivery of DI D/F Gate sluice valves (soft seated) resilient seated soft sealing Gate Valves (Sluice Valves) with body Bonnet of Ductile cast iron ofGrade GGG 40 or equivalent grade, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O Ring protection on the shaft and seals of NBR and the valves should be of Vacuum tight and100% leak proof with face to face dimensions as per BS 5163-89/ISI 4846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16 and DUCTILE IRON SPECIALS AS PER IS 9523/2000 including unloading ,transporation and stacking charges (Vide Annexures )DI 100 mm D/F Gate valve in D Mains :Supply and Delivery and fixing of DI D/F Gate Valve including DI Specials and labour charges transpotation charges etc., completed. 200MM dia
11
150MM dia
12
Refilling with excavatedsoil ( other than sand) complying with the standard specification in layers of 15 cm watered well rammed and consolidated after the pipes and specials are laid, jointed and tested etc., and removing and depositing the surplus earth complete as directed by the Engineer - in - charge pipe line
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
