Withdrawing And Lowering Of Submersible Pumping Machineries At Rbtw No-7, Rectification Of Cable Fault At Madanpur Head Works Site Under Rcfa Part-Ii Water Supply Scheme
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Feb 2024
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
madanpur → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Withdrawing And Lowering Of Submersible Pumping Machineries At Rbtw No-7, Rectification Of Cable Fault At Madanpur Head Works Site Under Rcfa Part-Ii Water Supply Scheme
BOQ
| Sl. No. | Item Description |
| 1 | Jungle cutting, cleaning compound premises or shrubs, plants, jungles etc. by cutting and removingas directed.(Specific permission of Engineer in Charge prior to execution will be necessary.(To cleaning the 3 nos tubewell sourrounding and cable laying portion) |
| 2 | Supply and delivery of 3 Core X 10 Sqmm Aluminum Armored, XLPE insulated 1.1 K.V. grade cable, conforming to IS 7098(I) as per direction of EIC.(Make:-Gloster/Mescab/Polycab/other approved in vendor list.)(Test Certificate is to be submitted at the time of deliver) |
| 3 | Supply of 4 mm2 x 3 core 1.1 KV Grade flat submersible copper conductor cable.(Make:Gloster/Mescab/Polycab/other approved make) |
| 4 | Withdrawing of submersible pumping machineries from old river bed Tube Well along with Column pipe after disconnection of all pipe line and power line connection with the help of Derrick and Chain Pulley arrangement by engaging skilled technician as per direction of EIC.a) 7.5 HP S/M P/M. |
| 5 | Lowering of Submersible pump Motor set along with 80 mm dia Column pipe part by part in the existing Tube Wells with an arrangement of Derrick and Chain Pulley arrangement, making Pipe line connection etc.all complete as per direction of EIC.(1 Nos Submersible Pump-Motor Supplied by department)a) 7.5 HP S/M P/M. |
| 6 | Making straight through joint between 1.5 mm2 or 2.5 mm2(motor cable) and 3 core X 4 mm2 submersible flat copper cable for extension of motor cable up to required lengh by supplying necessary seal kit to make joints leak proof all complete as per direction. |
| 7 | Making straight through joint of 3 core 10 mm² Al Ar cable with 3 Core x 4 Sqmm submersible flat cable by supplying Ferrul, rubber and other necessary materials to make the joint leak proof.(Without kit) |
| 8 | Laying of 10 mm2 x3 core Al. Ar. Cable along the length of G.I. collecting line including fixing with supplied clamps, nuts and bolts at a suitable interval so as to prevent sagging of cable complete as per direction of EIC.(Panel to RBTW)( 400 Mtr. Cable Supplied Departmentally) |
| 9 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes,anticorrosive paste & jointing materials. |
| 10 | Add. GST@18% |
| 11 | Add. Cess@1% |
AI Tender Summary
Tender Timeline
Feb 02, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 16, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 19, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender