Tamil Nadu Generation And Distribution Corporation Limited-TANGEDCO has published Tender For Control Room Svga. Submission Date for this Tender is 17-02-2024. Aluminium Furniture Tenders in Sivaganga Tamil Nadu. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Civil Works |
2 | Chipping the existing damaged ceiling portion, wall portion, removing the lose materials from the ceiling and clearing the debris away from the site including cost of all the materials, labours, lead, lift, etc., complete. |
3 | Providing P.C.C 1:2:4 using12- 20mm HBS to the damaged ceiling, lintel including cost of all the materials, labours, lead, lift, etc., complete. |
4 | Plastering the ceiling with CM 1:3- 12 mm thick with water proofing compound including cost of all materials labour lead lift etc complete. |
5 | Plastering the wall with CM 1:5- 12 mm thick with water proofing compound including cost of all materials labour lead lift etc complete. |
6 | Fabricating Supplying and fixing the position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rdprelaminated board of Aluminium partition.The outer frames Outer frame: 63.50*38*3mm@ 1.72 kg/m,Centre mullions: 63.50*38*3mm@ 1.55 kg/m,Alu.Clips: 17.27*17.15*1.50mm @0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with necessary aluminium clips of size 17.27*17.15*1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column, masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing as directed by the departmental officers.All the aluminium sections should be anodised not less than 15 microns as ISI specification 1868/1962 / and should be got approved by Executive Engineer before use |
7 | Supply and fixing in position of anodisedaluminiumpartially glazed single leafdoor using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M with necessary accesories such as aluminium clips, lock arrangements, door stopper with rubber bush,rubber beedings, hinges, handle, lock,hydraulic floor spring, etc, and with 12mm thick one side laminated board at bottom half portion and top half portion with 5.50mm thick sun cool glass including cost of all materials, lead, lift, etc, complete Single leaf door |
8 | Supplying, fabricating and fixing in position Aluminium Anodised natural colour mat finish Two track sliding window in all floors with Aluminium sections of outer Frame bottom 62*37mm*1.50mm at 1.218 kg/m, the side & Top 62*31.50mm at 0.778 kg/m, Shutter Top 40*18*1.5 at 0.38 kg/m, Bottom 40*18*1.5 at 0.38kg/m, Side Vertical 40*18*1.50mm at0.493 kg/m, Vertical locking section 40*29*1.5mm at0.632 kg/m, with necessary accessories such as rubber beadings, special hinges, lock, handle including supplying and fixing 4mm thick plain glass including cost of all materials, labours, power consumption required for fabrication, drilling holes in RCC column, slab, masonry walls wherever necessary with power drills to the required extent and make good to the original condition after fixing and also as directed. The aluminium sections are to be anodised with matt finish under electrically controlled in accordance with IS 1868/1962 for an average anodic film thickness 15 microns etc., complete. |
9 | Supplying and fixing of wash basin of size 550x400mm of approved quality Neycer/Parryware with all accesseries including cost of wash basin with pedestal cock fixing with rug bolt and nuts, 15mm dia PVC connecting hose and outlet using 40mm dia PVC waste pipe, CP valve tap etc, complete. |
10 | Applying white cement wall putty to the ceiling & wall surface inclunding cost of all materials, lead, lift, etc., complete. |
11 | Painting inside & outside walls withtwo coats ofInterior & Exterior Emulsion paintover aonecoatofprimerof approved colour and quality including cost of all matreials, lead and lift etc., complete. |
12 | Painting two coats with good quality of enamel painting over a coat of a primer in the steel door including cost of all materials, labour, lead, lift, etc., complete. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail