|
| 1 | Earth work excavation deploying earth moving machineries for desilting channel having a width of more than 10 m and forming bund on either side and depositing the earth on banks including jungle clearance etc., complete. (TWAD SOR pg no:315,item:25-1) |
| 2 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum |
| 3 | For column footings |
| 4 | For Kerb wall and Plinth Beam |
| 5 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 6 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation - Plinth Beam |
| 7 | Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification |
| 8 | Supply and fixing 600mm RCC non pressure spun pipe with socket and spigot ends as per IS 458/2003 manufactured with sulphate resistant cement with 12 mm HI -alumina lining with rubber ring joints. including all material and all labour charges, etc., complete with standard specificationn |
| 9 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 |
| 10 | Grade Beam |
| 11 | Column |
| 12 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. |
| 13 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - |
| 14 | Supplying and fixing of M.S Grill works including all labour and material charges etc.,complet as per standard specification |
| 15 | Painting two coats with ready mixed plastic emulsion paint of 1st class quality and of approved color over a priming coat including through scraping clean removal of dirt etc., complete and including necessary plaster of paris putty wherever required |
| 16 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors. |
| 17 | Providing and laying ,spreading and compacting graded stone aggregate to wet mix macadam (WMM) soecification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. |
| 18 | Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification |
| 19 | Supplying and fixing of 50mm dia GI pipe pillar size 0.20mx0.20mx2.10m Height including all charges etc., complete as per standard specification. |
| 20 | Supplying and fixing Chain Link Fencing 2\"x2\" using 10 Gauge Galvanised iron wire of all size including all cost and conveyance of all materials and all labour charges etc., Complete, and as directed by departmental officers. |
| 21 | Supply and fixing of TNEB meter board suitable for 3 phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 1½ feet using angle iron of size 1½\"x1½\"x1¼\" rigidly fixed on wall covered with Hylum sheet of size 2 feet x ½ of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 nos. 63A fuse units (500V) 1 No. Neutral link, copper earth flat size 1\" x ¼\" with inner connection of EB meter fuse units by 7/16 PVC insulated copper wire with earth connection complete (SD No 129) |
| 22 | Earthing as per the ISI specification with an earth electrode of 2.1m class \"B\" GI pipe of dia not less than 40mm with copper earthplate of size 125mm x 50mm x 6mm with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD No.233) |
| 23 | Supply and fixing of GI STEEL TUBULAR POLE FOR STREET LIGHT 4 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 4000mm Length with Single bracket |
| 24 | Supply & fixing of smart pack junction Box with 2 No. 6A SPMCB & Stud type terminals for 4Cx25mm cable etc. complete (LR) |
| 25 | Supply and erecting of 4 x 6 Sqmm Pvc armoured LTUG cable, including cost and conveyance of all materials to the site and labour charges etc complete Sd 201 |
| 26 | Supply & laying of 30W LED Street Light Fitting etc. complete (PWD SOR P.No.69) |
| 27 | Providing 3 seater back slope granite stiff sitting benches 5 feet in length 1.50 feet width 600x450x100mm size granite slab, 150x45x60mm size bench slab and back rest slope including cost and conveyance and fixing in poistion etc. complete |
| 28 | Providing single seater granite stiff sitting round benches (stool type) 60mm thick 45 cm dia granite slab for bench and 150mm dia on middle and 30cm in end posts including cost and conveyance and fixing in poistion etc. complete |
| 29 | Providing Solid Waste Bins to a size of 1.00m x 0.30m for Park sites etc. complete (TUFIDCO approved rate) |
| 30 | Supplying and Planting of Palm tree, Neem tree and Pungam trees sapling of height 180 - 240 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. |
| 31 | Provision for GST 18% |
