}

Tender For Green Space Development At S.F. No. 280 / 2A1 At Ward No. 13 Atm Cityin Pattanam Town Panchayat, namakkal-Tamil Nadu

Town Panchayats-TP has published Tender For Green Space Development At S.F. No. 280 / 2A1 At Ward No. 13 Atm Cityin Pattanam Town Panchayat. Submission Date for this Tender is 09-02-2024. Gardening Tenders in namakkal Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

41983602
Corrigendum : Tender For Green Space Development At S.F. No. 280 / 2A1 At Ward No. 13 Atm Cityin Pattanam Town Panchayat
Open Tender
Indian
Tamil Nadu
namakkal
09-02-2024

Tender Details

Green Space Development At S.F. No. 280 / 2A1 At Ward No. 13 Atm Cityin Pattanam Town Panchayat

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 07-Feb-2024 AMRUT 2.0 - PATTANAM TOWN PANCHAYAT - TENDER DATE EXTENSION Date 09-02-2024

Key Value

Document Fees
Refer document
EMD
INR 39000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Green Space Development at S.F. No. 280/2A1@ ward No. 13 ATM Cityin Pattanam Town Panchayat
Sl. No. Item Description
1Earth Work Excavation for foundation in all types of soils and sub soils to full depth (such as Soils in Rock / Silt / Light Black Cotton Soil / Ordinary Soil ) except in rock requiring blasting but inclusive of shoring, shuttering and bailing out water wherever necessary and refilling the sides of foundation with excavated earth other than sand in layers of 150 mm thick well rammed and consolidated, depositing the surplus earth in places shown by the Departmental Officers with initial lead of 10 m and initial lift of 2 m. Complete as per TNSS23 & 24, V, VI (S2), VII, 9,10 (A) Footing
2Plinth Beam
3Plain Cement Concrete of mix 1 : 4 : 8 (One part Cement, four part sand & eight part of aggregates) using 40mm gauge hard broken metal from approved quarry including all cost, conveyance of materials to site with proper mixing, compacting, finishing and curing etc., complete as per standard specification. TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII
4Supplying anderrecting centeringfor Sides and Soffits including necessary supports and strutting upto3.29mt height for plane surfaces as detailed below in all floors with all cross bracings using mild steel sheets of size 90mm x60mm and 10BG stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia supported at not more than 75cm centre to centre etccompleteComplying with standard Specification without Strutting.TNSS NO or NBC No 30(S) 86 86 A V, VI(S3)VII(A) Below G.L.
5For Column
6Vibrated Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20 mm gauge hard broken jelly for flooring including laying,consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panellingwherever necessary and as directed by the departmental officers 30 V, VI (S5) VII & 13
7Supplying and Painting the new plastered walls with two coats of Exterior emulsion paint (weather proof ) first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt etc. complete and including necessary plaster paris putty etc. wherever required.as per (ISI STD) (It mustprovide excellent resistance against the growth of algae and fungi on the walls. And it must offer excellent protection against alkali and UV degradation and the durability period should be 5 years. 61 V, VI (S4) 3
8Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc.,complete as per clause 406 of MORTH
9Supplying and laying Precast Designer Paver Block confirming to IS 1568-2006 specification manufacturing and laying standard of M40 grade 63mm thick (table clauses 5 and 9.14) suitable for bus terminals industrial complexes road on expensive soils etc., including the cost of paver block of size 225mm x 12.50 mm x 80mm and conveyance of materials to work site mentioned in the tender schedule cost of loading and unloading handling during over sand bed of 150mm thick (excluding the cost of sand) conveyance paver block cutter to site and hire charges of vibrators and block cutter operator and labour for leveling the sand to paver block etc., complete ISI 15658-2006.
10Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part M-sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.Complete with std.Specifications.(Using Vibrator)TNDSS NO: 30 V, VI (S3), VII-3.
11Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors as per standard specification.
12Brick Work in Cement Mortor 1:5 Mix (one cement, five sand ) using new best countryBricks of size 8 ¾”x 4 ¼”x 2 ¾”from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications.
13Plastering in Cement Mortor 1:5 Mix (one cement, five M-sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.
14Supply and fixing of M.S Grills For Compound wall with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.
15Painting the new walls with Exterior Emulsion paint Two coats with good quality of approved Emulsion paintcomplete in all floorscomplying with standard specification.( The Colour and shade of the paint shall be got approved by thedepartmental officers.)
16Painting two coats over the new iron work using ready mixed enamel paint including cost of all materials to site and all labour charges for mixing applying etc., Complete as per Standard Specifications
17Conducting Geophysical survey, Quality and Quanty test and transportation charges etc., including labour charges in the field rent of the vechile for reaching the palce,rent of the instrument and excluding charges for the Geologist etc., complete as per Standard Specifications
18Supply and delivery of 150 mm dia PVC plain casing pipe (CS)including cost and conveyance of materials and labour charges etc., :- Note:-Approximate length of pipe is given the length may be decided as per site conditions during drilling of borewell etc., complete as per Standard Specifications TWAD Page No : 22
19Drilling 150 mmDiaborewellin Hard rock areas anywhere in the state inculding transportation to site of work in hardrock areas inculding labour charges for insertion of MS casing pipe and flushing of borewell and for minutes. ( As per MD TWAD Board Chennai Letter No : F251112/Drilling rate/AE4/CoM/TWAD/2021/ Dated:27/4/2022 ) (A) upto 150 m from G.L.
20150 m- 180 m
21180 m- 210 m
22Supplyanddelivery of Three phaseof20 LPM150 mtr Head Submersible pumpset of Motor ISI/ISOwith ThreePHASE PANEL BOARD WITH TWO LEVEL GUARD AND AUTO STARTas per ISI Specificationsincluding all cost and conveyance to site etc., Complete
23Supply and delivery of Three Phase Panel Board - Star Delta with two level Guard and auto start suitable for 5.00 HPSubmersible pumpsets and accessories including all fittings suitable for Submersible pump sets.Panel Board should be provided as per specification. Rates inclusive of Packing, Loading, Freight, Unloading, Stacking, Transit andInsurance charges etc, complete TWAD Page No : 114
24Supply and delivery offollowing 32 mm dia UPVC Column Pipe and GI Pipes and Other Special materials of good quality includingcost of materials and labour with cost for coveyence to site etcCompletecomplyingwith standardSpecifications. etc.,(A) 32mm dia UPVC Column pipe TWAD Page No : 24
2532mm UPVC . Elbow PWD Page No : 114
2632mm UPVC . union
2732mm UPVCBend
2832mm Gate Valve TWAD Page No : 45
2932mm PVC MTA TWAD Page No : 27
3032mm end PVC Cap PWDPage No : 105
3132mm dia GI Flange set TWAD Page No : 44
3232mm M.S. Clamp set TWAD Page No : 44
33Labour Charges for the Erection of 20 LPM150 mtr Head Submersible pumpsetin borewell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TNICN switches starter, voltmeter,Ammeter, three pilot lamps capacitor single phasing preventor, water level guard and laying and jionting the cables andtwin earthing as per IE rules., complete and testing the pumpset and trail run for 10 days. TWAD page No308
34Supplying and fixing of PVC insulated and sheathed 3 core 4sq.mm Flat type Copper cable cofirming to IS 694/ 1990 and including cost and conveyance of all materials to site and labour charges etc, complete as per standard specification. TWAD page No ; 120
35Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC Open light point / Fan point (For Electronic regulator). etc, complete as per standard specifications. SD 19
36Supply andrun of 1.5 sqmm (22/0.3) pvc insulated SC unsheathed Cu. Conductor of 1100V grade on 7/20 GI bearer wire for Service connection mains(SD. NO 69)
37Supply and fixing of TNEB meter board suitable for 16 A single Phase service connection with 16A fuse unit (500 V) 32 A neutral link and earth link (1"x18" copper flat) on TW Plant of size 375mm x300mmx19 with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wirefrom EB meter to fuse unit(SD.No.125) with
38Supply and delivery of 1000 Lit capacity HDPE Tank including cost and conveyance to site loading unloading and trensporting etc., complete
39Supplying and fixing of four seater SEESAW to a height of 0.50m with 80mm dia leaver and 40mm top bar with MS pipes. The seatr is of moulded plastic with heavy duty bush bearing.The cost shall inclusive of all materials, labours and fixing etc., complete as directed by the dpeartmetal officers
40Supplying and fixing ofDouble Swing of height 2.40m height with 40mm dia MS pipes support as legs and top bar is 50mm dia.The seat is 9mm thick reinforced rubber with Antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro galvanized chain and the cost shall inclusive of all materials, labours and fixing etc., complete as directed by the departmental officers.
41Supplying and fixing of Jungle Gym The cost shall inclusive of all materials, labours and fixing etc., complete as directed by the dpeartmetal officers
42Supplying and fixing of slide for below 12 years old childrens to a length of 3.00 m with 80mm dia leaver and 40mm top bar with MS pipes. The seater is of moulded plastic. The ladder frme is made up of 25mm M.S. ppe., handrail 20mm dia MS pipe and the centre support is 80mm dia MS pipes.The cost shall inclusive of all materials, labours and fixing etc., complete as directed by the departmental officers.
43Suuplying and fixing of Three sheater bench made of high quality materials Providing single seater double polish finish blackGranitesitting single round bench ( stool type) 100 thick 45cm dia granite slab for bench slab and 150mm dia on middile and 30cm on end posts including cost and conveyance and fixing in position etc., complete
44Supply and installation of LED based Street Light luminaire made up of extured alluminium alloy body sealed toughened glass protector and pc side Covers. The optical and control Gear compartment should be with IP66 Tightness. Leds in Natural White (4000-4
45Supply and fixing of 2 x1.5 sq mm Copper cable from pole switching point to light fittings etc., complete
46Supply and fixing of light post 4.00 M length with gradually reduce type pole 3 stages using 75mm and 50mm and 25mm size and bent up to top edge LED including fiber connection junction box internal wiring works on each pole inculuding cost and conveyance etc.., complete
47Supply and Planting Border Plants on the sides of the foot path including inner portion of native varieties including cost and of labour etc., complete (A) Ficoss tree
48border plants
49Oranamental plants
50Flower beds
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail