Construction Of Community Hall At Dimdima T.G, Birpara T.G And Ramjhora Tg Under Madarihat Block In The District Of Alipurduar.
Tender Value
1.98 Crore
Estimated cost
Bid Submission
21 Feb 2024
0 days left
EMD
3.97 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
madarihat → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Community Hall At Dimdima T.G, Birpara T.G And Ramjhora Tg Under Madarihat Block In The District Of Alipurduar.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary. |
| 2 | Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring. |
| 3 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)(a) With ear |
| 4 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished |
| 5 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety |
| 6 | Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. VarietyIn ground floor(a) 1:3:6 proportion |
| 7 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.Pakur variety |
| 8 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight includ |
| 9 | (f) 25 mm to 30 mm shuttering without staging in foundation.In Ground Floor |
| 10 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, pla |
| 11 | Brick work with 1st class bricks in cement mortar (1:6)(a) In foundation and plinth |
| 12 | Brick work with 1st class bricks in cement mortar (1:6)(b) In superstructure, ground floor |
| 13 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 14 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. |
| 15 | 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Enginee |
| 16 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if req |
| 17 | (A) FloorWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m(i) Coloured decorative |
| 18 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(ii) Grill weighing above 16 Kg./sq.mtr and above |
| 19 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers |
| 20 | Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lu |
| 21 | (iv) Two point nose steel handle including fitting and fixing. |
| 22 | (vi) steel peg stay 300 mm long including fitting and fixing. |
| 23 | (viii) M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars. |
| 24 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall)(i) 3 mm thick (weighing 7.4 kg/Sq.m) |
| 25 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three dec |
| 26 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)(c) 40mm X 6mm, 125mm Length |
| 27 | (i) Door stopper.(Brass) |
| 28 | i) Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete.(b) Medium (I.S.I. size 2) |
| 29 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:(ix) 300mm long x 10mm dia. bolt. |
| 30 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete.(iii) 300mm x 16mm dia. bolt. |
| 31 | ron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.(vii) 100mm. X 58mm. X 1.90mm. |
| 32 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:(a) With continuous plate base (Hexagonal/ Round rod)(iv) 125 mm grip x 10 mm dia rod. |
| 33 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the d |
| 34 | Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised ste |
| 35 | PVC Door Shutter-30 mm thick:Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm |
| 36 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding co |
| 37 | Internal Plaster(i) With 1:6 cement mortar(c) 15 mm thick plaster |
| 38 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. |
| 39 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the sur |
| 40 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface.Two Coats |
| 41 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffo |
| 42 | Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless |
| 43 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to |
| 44 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn)coating of 150 grams per sq. metre (followed by colourcoated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporti |
| 45 | Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping)(A) 300 mm lapping each way(a) With 0.60 mm sheet |
| 46 | Supplying, fitting and fixing of false ceiling framework with powder coated exposed G.I. grid suspension system (E-Grid T 2430/1510 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) |
| 47 | A. Exposed False-ceiling Work --(a) Supplying, fitting & fixing High Pressure steam Cured Non Asbestos fibre cement standard ceiling board (Density > 1300Kg per Cu.m. ) of size595mm X595mm conforming IS 14862 and type B, catagory III of ISO 8336, tested |
| 48 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 49 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 50 | Sanitary & plumbing works: Supply fitting & fixing Peet\"s valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fitting (tseted to 21 Kg per Sq. cm.)ii) 80 mm dia |
| 51 | Supply fitting & fixing Peet\"s valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fitting (tseted to 21 Kg per Sq. cm.)vi) 32 mm |
| 52 | Supply fitting & fixing Peet\"s valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fitting (tseted to 21 Kg per Sq. cm.)vii) 25 mm |
| 53 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). (ii) 80 mm dia |
| 54 | Supplying, fitting & fixing bib cock or stop cock. b) (ii) Chromium plated Concealed Stop Cock(Equivalent to Code No. 514(A) & Model- Tropical / Sumthing Special of ESSCO or similar brand) |
| 55 | c) (ii) Chromium plated Bib Cock with wall flange (Equivalentto Code No. 5047 & Model- Florentine of Jaquar or similarbrand) |
| 56 | f) (i) Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO / ATLAS or equivalent) (i) 15 mm Each |
| 57 | Supplying, fitting & fixing C.I. holder bat clamp including cutting holes in wall etc. &mending good all damges in cement concrete with jhama chips (1:2:4) & cement plaster (1:6) to match & curing complete in all respect. iii) 25 mm |
| 58 | Supplying, fitting & fixing C.I. holder bat clamp including cutting holes in wall etc. &mending good all damges in cement concrete with jhama chips (1:2:4) & cement plaster (1:6) to match & curing complete in all respect. iv) 32 mm |
| 59 | Supplying, fitting & fixing C.I. holder bat clamp including cutting holes in wall etc. &mending good all damges in cement concrete with jhama chips (1:2:4) & cement plaster (1:6) to match & curing complete in all respect. (vii) 65 mm |
| 60 | Supplying, fitting & fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 & threaded to match with GI Pipes as per IS : 1239 (Part - I). With all necessary accessories, specials viz. socket, reducing tee, short piece etc. fitted with holderbatsclamps, including cutting pipes, maing threads, fitting,fixing etc. complete in all respect including cost of all coats of painting with approved paint in any positionabove ground.(Payment will be made on the centre line measurments of total pipe line including all specials. No separate payment will be made for assesories, specials. Payment for painting will be made seperately)a) For Exposed Work PVC Pipes (Dia) 25MM |
| 61 | 32 mm |
| 62 | 65 mm |
| 63 | b) For Concealed Work 15mm |
| 64 | 20 mm |
| 65 | 25 mm |
| 66 | Supplying, fitting & fixing PVC pipes for underground work of approved make of medium duty) conforming to ASTMD - 1785 & threaded to match with GI Pipes as per IS : 1239 (Part - I). With all necessary accessories, specials viz. socket, bend, tee, union, coss, elbo, nipple, lomgscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials, jointing materials, cutting pipes, making thread, cutting trenches upto 1.5 metrebelow suffacein all sorts of soil & refilling the same directed complete in all respect. (Payment will be made on the centre line measurments of the total pipe line including all specials. No separate payment will be made for assesories, specials)PVC Pipes (Dia) 32mm |
| 67 | Supplying, fitting & fixing PVC pipes for underground work of approved make of medium duty) conforming to ASTMD - 1785 & threaded to match with GI Pipes as per IS : 1239 (Part - I). With all necessary accessories, specials viz. socket, bend, tee, union, coss, elbo, nipple, lomgscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials, jointing materials, cutting pipes, making thread, cutting trenches upto 1.5 metrebelow suffacein all sorts of soil & refilling the same directed complete in all respect. (Payment will be made on the centre line measurments of the total pipe line including all specials. No separate payment will be made for assesories, specials)PVC Pipes (Dia)40 mm |
| 68 | Supplying, fitting & fixing PVC pipes for underground work of approved make of medium duty) conforming to ASTMD - 1785 & threaded to match with GI Pipes as per IS : 1239 (Part - I). With all necessary accessories, specials viz. socket, bend, tee, union, coss, elbo, nipple, lomgscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials, jointing materials, cutting pipes, making thread, cutting trenches upto 1.5 metrebelow suffacein all sorts of soil & refilling the same directed complete in all respect. (Payment will be made on the centre line measurments of the total pipe line including all specials. No separate payment will be made for assesories, specials)PVC Pipes (Dia)50 mm |
| 69 | Supply , Fitting & Fixing of complete Bottle waste tap. i)32 mm |
| 70 | Supplying, Fitting, Fixing 10 litre P.V.C. low-down cistren conforming to I.S. specification with P.V.C. fitting complete, C.I. brackets including two coats of painting to bracket etc. |
| 71 | Supplying P.V.C. water storage tankof approved quality with closed top with lid (Black) -Multilayer |
| 72 | Labour for punching hole in plasticwater storage tank upto 50 mm dia. |
| 73 | Labour for hosting plastic storage tank. i) upto 1500 litre capacity |
| 74 | Supplying, fitting & fixing white vitreous china best quality approved make wash basin with C.I. brakets on 75mm x 75mm wooden blocks, C.P. waste fitting of 32 mm dia, one approved quality brass c.p. pillar cock of 15 mm dia., C.P. chain with rubber plug |
| 75 | Supplying, fitting & fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.iii) 600 mm long |
| 76 | iv) 750 mm long |
| 77 | Supplying, fitting & fixing approved brand 32 mm dia. P.V.C. waste pipe, with P.V.C.. Coupling at one end fitted with necessary clamps.ii)750 mm long |
| 78 | Supplying, fitting & fixing pillar cock approved make a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model -Tropical / Sumthing Special of ESSCO or similar brand). |
| 79 | Supply of UPVC pipes (B type) & fittings conforming to IS-13592-1992(A) Pipes(i) Single socketed 3 Metre Length b) 110 mm |
| 80 | (i) Single socketed 1.8 Metre Length b) 110 mm |
| 81 | b)fitting(i)coupler b)110mm |
| 82 | v) Plain Y b)110mm |
| 83 | ix) Bend 45 degreeb)110mm |
| 84 | x) Bend 87.5 Degree b)110mm |
| 85 | xi) Door bend (T.S.)b)110mm |
| 86 | xxi) 110 x110 \"P\" Trap 75 mm |
| 87 | Labour for fitting & fixing U.P.V.C. pipes for above ground work including cost of joining materials etc. fitting & fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary & mending good all damages excluding the cost of masonary or concrete work, if necessary, but including the cost & fitting & fixing holder bat clamps (any floor) or for underground workincluding cutting trenches upto 1.5 meter & refilling the same complete as per direction of Engineer-in-charge. (Payment will be made on centre line measurment of the total pipeline includings specials)A) Above ground (ii) 110 mm dia. Metre |
| 88 | A) Under ground (ii) 110 mm dia. Metre |
| 89 | Supplying, fitting & fixing E.W.C. in white glazed vitreous chainaware of approved make complete in position with necessary bolts, nuts etc. a) With \"P\" trap |
| 90 | Supplying, fitting & fixing 32 mm dia. Flush Pipe of approved make with nexessary fixing materials & clamps complete. i) Polythene Flush P |
| 91 | Supplying, fitting & fixing liquidsoap container c) Fibre glass |
| 92 | Supplying, fitting & fixing soap holder |
| 93 | Supplying, fitting & fixing best quality Indian make mirror 5.5 mm thick with silvering as perI.S.I. specification suppoerted on fibre glass frame of any colour, frame size 550 mm x 400 mm |
| 94 | Supplying, fitting & fixing towel rail with two brackets.(b) Aluminium |
| 95 | Supplying, fiiting & fixing Flat back urinal (half stall urinal) in white vitreous chainaware of approved make in position with brass screws on 75mm x 75mm x 75mm wooden blocks complete.(ii) 470 mm X 280 mm X 340 mm |
| 96 | Constructing inspection pit of inside measurment 600mm x 600mm x upto 600mm (depth) with 250mm thick 1st. class brick work in mortar (1:4) on sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over layer of jhama |
| 97 | Construction of septic tank of different capacities as per approved drawing with 1st. class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. mahole cover (heavy type) of approved make supplied, fitted & fixed in the 100 mm thick R.C.C. ( |
| 98 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round & cement brick work (1:4) upto 0.90 metre from the top with |
| 99 | Supplying, fitting and fixing with cement jointing (3:1) salt glazed stonewared pipe including excavation of earth upto 1.50 metre depth in all sorts of soil both mixed or unmixed and refilling (but excluding concreting at bottom and sides.) |
| 100 | Cement Concrete with graded jhama khoa (30 mm. size) excluding shuttering In ground floor and foundationa)1:3:6 proportion |
AI Tender Summary
Tender Timeline
Feb 02, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 21, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 23, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender