Military Engineer Services-MES has published Tender For Additional/Alternator To Approach Paths Of 06 X Hc Md Accns Block Nos 95,97,100,102,103 And 105) And Hard Standing At B Mess Parking Area At Awc Under Ge Awc Mhow. Submission Date for this Tender is 28-02-2024. Road Work Tenders in Indore Madhya Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 15-Feb-2024 | certain amendment in Make list | Other | 21-02-2024 |
2 | 21-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-02-2024 |
Sl. No. | Item Description |
1 | Demolition ofcement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed. |
2 | Demolition ofreinforced cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed. |
3 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillar etc but excluding ashlar facing dressed stonework and precast concrete surfaces complete all as specified and directed . |
4 | Material and labourfor Brick work with Fly ash bricks, with sub class "B" modular bricks, straight or curved on plan exceeding6m mean radius built in CM 1:6 complete all as specifiedand directed. |
5 | M&L PCC 1:3:6 type C1 using 20mm graded agreegate as in cement channel and drain complete all as specified and directed. |
6 | Material & labour for extra for forming fair finished drain or channel in 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
7 | M&L for rendering 15mm thick on fair faces of brick work surfaces in cement mortar 1:4,finish the surface even and smooth without using extra cement all as directed and specified. |
8 | S & F for framed work such as grills, grating etc with end of bars shouldered and / riveted of forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk way; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
9 | M & L for preparation of new or previously untreated steel surface of Steel and iron surfaceover 10 cm width or girth and applying two coats synthetic enamel paint over a coat of red oxide zinc crome primer complete all as specified and directed. |
10 | Material and labour for RCC 1: 1½:3 type B1 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for column footing/bases for column etc complete all as specified and directed. |
11 | Material and labour for RCC type A-1 1: 1½:3(using 20mm graded stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings, including attached pilasters and buttresses complete all as specified and directed. |
12 | Use and waste of formwork to rough finished surface of concrete as in faces of walls, retaining walls, abutments, parapets and staircase railings and similar work, including attached pillasters, buttresses etc vertical or to batter complete all as specified and directed. |
13 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beam, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter surfaces for rough finished flat surfaces of concrete, complete all as specified and directed. |
14 | S&F TMT bars 10 mm dia and over, cut to length, bent to shape as required incl cracking bending spirally for hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed. |
15 | M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregates as in cills, steps, seimic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, copings, kneelers, apex, stones bed plates etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work, complete all as specified and directed. |
16 | Demolition of plain cement concrete in ground floors and pavings n. Exc. 15cm thickness (below or above ground level) complete all as specified and directed. |
17 | M & L Surface excavation not exceeding 30cm deep and averaging 15cm thick and getting hard/dense soil complete all as specified and directed. |
18 | M&L Moorum (or) Red bajri filling in pavings laid in layers not exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
19 | M&L for PCC 1:3:6 type C2 using 40mm graded agreegateas in sub base/ Sub floor/ paving/Ramp/foundation and any other location etc. complete all as specified and directed. |
20 | M&L for 60 mm thick Machine pressed precast interlocking paver block any shape and size as approved by GE conforming to IS 15658-2006, M-35grade with grey cement and pigment dry & joints filled with fine sand complete all as specified and directed. (Note :- Stone dust shall be measured and paid separately under relevant items) |
21 | M&L for sand filling in floors or interlocking tile including watering and consolidation for interlocking paver block complete all as specified and directed. |
22 | M&L for 50mm thick PCC 1;2:4 type B-1 using 20mm graded aggregate as in floor/paving etc and incl contraction joint as required, complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail