Military Engineer Services-MES has published Tender For Additional/Alternator At P-450 Under Ge (South) In Zone-Iii Area At Jaipur Mil Stn. Submission Date for this Tender is 28-02-2024. Mobile Generator Tenders in jaipur Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-02-2024 |
| Sl. No. | Item Description |
| 1 | Excavation in soft/loose soil for post holes (or similar holes) each not exceeding 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and directed. |
| 2 | M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 3 | S&F Rolled mild steel in Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections Fe 410-W (Gde-E- 250) quality-A complete all as specified and directed. |
| 4 | S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleatsetc. conforming to Fe-410W Gde E-250 quality "A"complete all as specified and directed. |
| 5 | M&L Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chromecomplete all as specified and directed. |
| 6 | S&F Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 7 | Taking down chowkats or frames exc 1.5 sqm but not exc 4.0 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 8 | Providing and fixing factory made uPVC white colour casement(openable) window made of extruded profiles with thickness of 2.3 mm(+-0.2 mm) . Window profile with hollow section with multy chamber. Frame (60mmx 58 mm), sash (60mmx 73mm). T Profile ( one vertical length in two between shutter) (74mmx64mm ).glazing bead (35 mm x 20 mm ) will be mittered cut & fusion welded at all corners including drilings of holes for fixing hardware & drainage of water etc. making arrangement for fixing of hardware, EPDM gasket 1.2 mm (+- 0.2 mm) thickgalavanised steel frame (28 mmx21.5mm ),sash (31mmx 27 mm). T profile (27 mmx17mm) to be inserted in required profile . frame will be fixed to the wall with 8 mm x100mm long fasterers.Hardware : casement handle made of zinc alloyed (white powder coated) but hinge of zinc alloyed( white powder coated) transmission gear made of mild steel with multy point locking system & 5mm thick glazing with selected quality glass ( Note: The unit rate quoted by contractor included cost of 4.8mm thick glass, stainless steel wire cloth0.63 mm nominal dia of wire and average width of aperture 1.40 mm and includes all other connected accessoried) for Area exc. n 1.00 sqm ) |
| 9 | M&L granite 18 to 20mm thick as in steps ,pillars, Jambs, counter slabs of WHB (of any type) work (table rubbed and polished) in cooking plate forms, counter of WHB and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 10 | M&L Anodised aluminium frame with powder coating (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and directed. |
| 11 | M&L Anodised aluminium door shutters with powder coating (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 12 | Dismantling boarding plywood etc of any description and in any position fixed with nails etc complete all as specified and directed. |
| 13 | M&L in repairs 18 mm thick (one side decorative lamination and other side balancing lamination ) solid PVC board with cement solvent adhesive for shutter,kitchen cabinet/ cup board /partition wall/ wall cabinet complete all as specified and directed. |
| 14 | S&F soft close clip on hinge bright finish (Auto close hinges) complete all as specified and directed. |
| 15 | S&F 125 mm dia oval shape brass handle fancy type bright finish complete all as specified and directed. |
| 16 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 17 | M&L Brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in CM (1:6) complete all as specified and directed. |
| 18 | M&L rendering 15 mm thick in CM(1:4) on brick walls or concrete surface, surface finished even and fair without using extra cement complete all as specified and directed. |
| 19 | M&L Preparing new plastered surfaces including scrapping and applying two coat of distemper complete all as specified and directed. |
| 20 | S&F35 mm thick second class hard wood rail and style plain framedpanelled shutter (two panel) with lock rail and panel of 9 mm BWP commerical ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 21 | S&F 100 mm butt hinges medium weight cold rolled mild steel, ISIcomplete all as specified and directed. |
| 22 | S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded sectioncomplete all as specified and directed. |
| 23 | S&F Aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 24 | S&F Aluminium handles 125 mm size, cast type, anodised complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
