Military Engineer Services-MES has published Tender For Repair To Flooring, Plastering, Joinery, Interlocking/Chequred Tile And Misc Work For E/M Installation At Dholewal And Doraha Under Ge Ludhiana. Submission Date for this Tender is 28-02-2024. Cable Accessories Tenders in doraha Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-02-2024 |
| Sl. No. | Item Description |
| 1 | Sch "A" |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level). complete all as specified and directed. |
| 3 | M&L 75 mm thick cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as inflooringfinished even and smooth without using extra cement in alternate panels complete all as specified and directed by Engineer-in-Charge. |
| 4 | M&L 25mm thick PCC 1:2:4Type B-1 using 20mm graded stone aggregate as in sub base finished even and fair without using extra cement including necessary form work complete all as specified and directed by Engineer-in-Charge. |
| 5 | M&L for machine cut kota stone slab flooring 18-20 mm thick laid over and including screed bed 15 mm thick in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing and granite polishing completeall as specified and directed by Engineer-in-Charge. |
| 6 | M&L 75 mm thickPCC (1:4:8) type D-2using 40 mm graded stone aggregate as in sub base, floors and pavings all as specified. |
| 7 | M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Gradelaid over and including 25mm thick sand layer, including necessary cutting and waste as per site requirement complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L Chequered cement concrete tiles 30cm x30cm x 25mm thick set, jointed and pointed in neat cement slurry and pointed with grey cement and pigment over and including 15mm thick screed bed or bedding in cement mortar 1:6 in floors all as specified and as directed |
| 9 | M&L for providing, cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges all as specified and as directed |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off thepremises complete all as specified and directed. |
| 11 | M&L forjoint free non - skidceramiccoloured tiles7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over andincluding 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 12 | M&L forjoint free non - skidceramiccoloured tiles7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed. |
| 13 | M&L forglazedceramiccoloured tiles in vertical surface300x450x7mm/350x250x7 thick, set & jointed in neat cement slurry and pointed in whiteor coloured cement to match the colour of tiles, overand including 10 mmthick rendering in cement mortar 1:4 complete all as specified and as directed. |
| 14 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50sqm but not exceeding 4.00sqm each and removing from site all as specified & directed by Engineer-in- charge. |
| 15 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50sqm each and removing from site all as specified & directed by Engineer-in- charge. |
| 16 | Taking down shutter of any description exceeding1 Sqm and n exc 2 sqm each complete all as specified and as directed byEngineer –In -Charge. |
| 17 | S&F for Pressed steel frames of size 105x60mm sheet thickness 1.25mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,tarring back of chowkhats & holdfast etc, complete all as specified and directed by Engineer-in-Charge. |
| 18 | S&F for Pressed steel frames of size 125x60mm sheet thickness 1.25mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast etc., complete all as specified and directed by Engineer-in-Charge. |
| 19 | M&L cementconcrete 1:3:6 type Co (using 12.5 mm thick crushed stone aggregate) as filled in door frame chamfered angles, Hold Fast and throating, complete all as specified and directed. |
| 20 | S&F of factory made plain framed pannelled door shutters 35mm thick (two layer panel)2nd class hard woodwith lock rail and panel of 9mm BWP commercial ply or 12mm verneering on both faces.The size of rail and stile as per IS-1003, SSR Pt-I kiln seasoned and chemically treated all as specified and as directed. Type of wood as approved. |
| 21 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube suppling & fixing in opening as per specification and drawing complete all as specified and directed by Engineer-in-Charge. |
| 22 | S&F factory made soilid panel PVC Door shutter 30mm thick (Stype) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC "C" channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and directed by Engineer-in-Charge. |
| 23 | M&L for 35mm thick factory made glazed and skeleton shutters,2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge.Type of wood as approved. |
| 24 | S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 25 | S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified . |
| 26 | S&F anodised aluminium grillType -B ( 3.13 Kg/Sqm) (anodised transparent or dyed to required shade according to IS-1868 with minimum anodic coating of grade AC15) of approved designed/pattern with approved standard section and fixed to existing window frame with CP brass / stainless steel screw @ 200mm c/c, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per architectural drawings and the directions of Engineer-in-Chief. |
| 27 | M&L for Box type steel window/ventilator 1.00 mm thick made of ERW tube P-section of size 60 mm x 25 mm single rebated outer frame, comprises glazed skelton of ERW tube P-Section size 50mm x 20mm with one/two Nos open able leaf consisting of two Nos Sash bar of T-section 20x3 mm welded to frame with one or more vertical mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass incuding fittings and fixtures like handle, Tower bolt, stopper, Cleat, Pintal Hinges, holdfasts etc complete including cutting holes, making good dismantled portion in PCC 1:2:4 type B-1, all as specified and directed.(a) Holdfast 150mm long of 12mm x 3mm MS flat-04 Nos per window. (b) Handle of Z section 20mm x 25mm, 100mm long-01 Nos per leaf. (c) Z Section stopper 20mm x 25mm, 100mm long-01 Nos per leaf. (d) Cleat 55mm long of hollow square 15mm x 12mm- 02 Nos per leaf. (e) MS pintol hinges size 75mm x 12mm -02 Nos per leaf.(f) One shop coat of red oxide primer Note:- MS guard bars, sheet glass, and painting shall be measured and paid seperately. |
| 28 | All as per item no 26 but fixing with wire mesh(wire mesh shall be paid seperateley. |
| 29 | S&F mild steel framed work such as guard bars/grills,grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer complete all as specified. |
| 30 | Hacking out old broken glass( any thickness, size, quality or description ) from wooden frames, metal frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engineer-in-Charge. |
| 31 | M&L for 3mm thick Sheet glass, ordinary quality and glazing with silicon sealant in square n exc 0.5 sq.m in each pane complete fixed in repair all as specified and directed by Engineer-in-Charge. |
| 32 | S&F Sheet 3.0 mm thick frosted glass, squares nexc 0.5 sq. m each pane complete all as specified and directed by Engineer-in-Charge. |
| 33 | S&F Sheet glass 5.5mm , ordinary quality and glazing with oil putty in square nexc 0.5 sq. m in each pane all as specified & directed by Engineer-in- charge. |
| 34 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-Charge. |
| 35 | S&F in Aluminium handles, cast type, anodised 150mm long completed all as specified and directed. |
| 36 | S&F in300mm, ordinary rat tail rod pattern springs including roller and roller plate complete. |
| 37 | S&F 100mm size Butt hinges, medium weight, cold rolled mild steel bright finish complete all as specified and directed by Engineer-in-Charge. |
| 38 | S&F 150mm aluminium anodised tower bolts of extruded section fixed with screw, complete all as specified & directed by Engr-in-charge. |
| 39 | S&F inAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolts 200 mm complete all as specified and directed. |
| 40 | Supply and fix in repair Vitreous China squatting pan orissa pattern size 580 x 440 mm white with integral foot rests including connection to trap and to flushing pipe,complete all as specified & directed. |
| 41 | S&F in repair PVC low level flushing cisternsyphonic action typewhitewith inlet ball valve, handle including brackets10 ltrscapacityincluding flush pipe of 32 mm dia etc complete all as specified and directed by Engineer-in-Charge. |
| 42 | S&F in repair vitreous china ware wash hand basin white flat, backof size 580mm x 450mm, including waste coupling and waste pipecomplete all as specified and directed by Engineer-in-Charge. |
| 43 | S & F in repairs PVC connections 15mm size with PTMT nuts and bolts of length 600 mm etc complete all as specified and directed |
| 44 | S&F in repair pillar tap,15 mmcast copper alloy fency type chromium plated screwed down high, pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15mm bore of pipeetc all as specified and directed by EIC. |
| 45 | S&F in repairs Bib taps,chromium plated cast copper alloy with crutch or butterfly handle fency type, screwed down , screwed for iron pipe or for brass ferrule and fixed in iron pipe of 15 mm complete all as specified and directed. |
| 46 | S&F in repair stop valves/angle valve 15mm bore , cast copper alloy fency type, chromium plated ,screwed down high pressure with crutch or butterfly handlescrewed both ends for iron pipe or for unions and fixed etc complete all as specified and directed. |
| 47 | S&F in repairs looking mirror 600mm x 450mm bevelled edge of selected quality glass mounted on 6mm commercial ply or AC building boards with aluminum frame all around and fixed to wooden plug with CP brass screws all as specifiedand directed |
| 48 | Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge. |
| 49 | All as per item no 47 all as per above item but 20mm bore. |
| 50 | S&F 15mm GI tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors. |
| 51 | All as per item no 49 but 20mm bore. |
| 52 | Demolition of brickwork built in cement or cement lime mortar incl all quoins, arches, pillars, etc but excl ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge. |
| 53 | M&L brick work with sub class "B" bricks straight or curved on plan exc 6 mtr mean radius built in cm 1:6 all as specified |
| 54 | All as per item no 52 but except bricks.Old bricks shall be reused. |
| 55 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified & directed by Engineer-in-charge. |
| 56 | M&L rendering 5mm thick on in cement mortar (1:3) on ceiling/ soffit of slabs finished even and smooth without using extra cement complete all as specified & directed by Engineer-in- charge. |
| 57 | M&L rendering 15mm thick on brick work or concrete surface in cement mortar (1:4) and finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge |
| 58 | M&L rendering 12mm thick on brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge. |
| 59 | M&L for Dubbing out in cement plaster (1:4) of average 10mm thick on irregular face of walls complete all as specified & directed by Engineer-in-charge |
| 60 | M&L preparing newly plastered or pointed surface of ceiling and applying two coats of white wash complete all asspecified & directed by Engineer-in-charge. |
| 61 | M&L preparing newly plastered or pointed surface of walls and applying three coats of white wash complete all as specified & directed by Engineer-in-charge. |
| 62 | M&L prepration of newly plastered or pointed surface of walls and applying two coat of cement base paint complete all as specified & directed by Engineer-in- charge. |
| 63 | M&L for complete removal of existing treatment and applying two coat of cement base paint complete all as specified & directed by Engineer-in- charge. |
| 64 | M&L One coat white wash on wall undecorated surfaces including prepration of Old plastered surfaces complete all as specified & directed by Engineer-in- charge. |
| 65 | M&L One coat white wash on ceiling undecorated surfaces including prepration surface, plastered or un plastered of Old undecorated surfaces complete all as specified & directed by Engineer-in- charge. |
| 66 | M/L50 mm thick PCC 1:3:6mix type C2 as in plinth protection and paving finishing cone surface even and fair all as specified and directed. |
| 67 | Taking down eaves gutters and rain water pipes including all fittings and size and patterncomplete all as specified & directed by Engineer-in- charge. |
| 68 | Supply & fixing 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, jointed with solvent fixed to walls completeall as specified & directed by Engineer-in- charge. |
| 69 | Supply & fixing PVC (SWR) bend 110mm bore of any redius complete all as specified & directed by Engineer-in- charge. |
| 70 | Dismantling mild steel rolling shutters, doors gates and the like complete all as specified and as directed byEngineer-in-Charge. |
| 71 | S&F Ball bearing for rolling shutterscomplete all as specified and as directed byEngineer-in-Charge. |
| 72 | S&F helical wire spring with new 8 gauge helical wire spring complete all as specified and directed. |
| 73 | S&F steel rolling shutters of thickness of laths 1.00mm , with out ball bearing, as specified including top cover, anchoring rod, hasp and staple, guide channels, stopper, handles, lock plate,sliding lock-2No. on each rolling shutter, 2 No. of bracket plate on each rolling shutter,, u-clamp, pulley as per requirementand one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and as directed byEngineer-in-Charge. |
| 74 | M&L for Cleaning, oiling and greasing the guide channels of gear operated or manual type steel rolling shutter alongwith bevel gear box and crank handle complete all as specified |
| 75 | M&L forpreparation of new or previously untreated woodensurface of any description two coats of synthetic enamel paint over a coat of pink primer including prepration to new wooden surfaces exc.10cm in width or girth complete all as specified and directed by Engineer-in-Charge. |
| 76 | M&L forpreparation of old painted wooden surface of any description one coat of synthetic enamel paint over 10cm in width or girth complete all as specified and directed by Engineer-in-Charge. |
| 77 | M & L for preparation of new or previously untreated steel surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 78 | M & L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coats of synthetic enamel paintcomplete all as specified and directed. |
| 79 | Dismantling water tank & removing to store of capacity exc 250 and n exc 500 Ltr complete all as specified and directed. |
| 80 | S&F in repairs Rotational moulded polythylene water strarge tanks 500 ltr (Cylinderical vertical with closed top ) hoisted and fiexed in position all as per specified in SSR Pt-1complete all as specified and directed. . |
| 81 | S&F in repair20mm bore Brass ball valve with polythylene float and fly nut fixed in repairs complete all as specified and directed. |
| 82 | S&F in repair stop valves 20mm, cast copper alloy, screwed down, high pressure with crutch or butterfly handle etc complete fixed in repaircomplete all as specified and directed. |
| 83 | Dismantling Asbestos cement ( corrugated , semicorrugated , etc) sheets in roof covering all as specified. |
| 84 | S/F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 85 | S/F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 86 | Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 87 | S&F Gl frame work 605 x 605mm grid for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specified. |
| 88 | S&F Non asbestos fibre cement building boards 7- 8mm fixed or laid/ inserted to GI framework with screws in ceiling flat or sloping complete all as specified |
| 89 | Taking down carefully the point wiring (light, Fan, socket or power) complete, (incl fittings such as switches, sockets any type, ceiling roses, pandents, light fittings, etc for taking credit( credit for above items should be made as per conditions separately) and making good disturbed surface of walls floors etc. all as specified. |
| 90 | M&L for point wiring with 1.5 Sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit fire proof, medium grade, ISI marked 20 mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box / modular junction box, bell mouth, reducer, bend and flexible conduit etc including cutting chases in wall for laying of conduit and making good to all disturbed surfaces and matching the same with adjoining specifications, sunk type pressed steel terminal switch box 1.6mm thick with3 mm thick plastic laminated sheet with modular plate and shutter fixed with steel screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed for the followings. |
| 91 | One light/fan point controlled by one, one way switch |
| 92 | Oneswitch socket outlet point 5 Amps on independent board |
| 93 | One 3 Pin socket outlet , 5 Amps on the same board with other switch |
| 94 | All as per item No. 89 described here-in-before but with copper conductor cable FR LS 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including provision of 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board. |
| 95 | M&L for point wiring with 1.5 Sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through existing surface/ concealed conduit and accessories andterminated in andincluding new sunk type pressed steel terminal switch boxes 1.6 mm thick with plastic laminated bakelite sheet top cover 3 mm thick make hylum fixed with nickel polished steel screws with washers and including1.5 Sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed for the followings. |
| 96 | One light/fan point controlled by one, one way switch |
| 97 | Oneswitch socket outlet point 5 Amps on independent board |
| 98 | One 3 Pin socket outlet , 5 Amps on the same board with other switch |
| 99 | All as per item No. 90 described here-in-before but with copper conductor cable FR LS 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including provision of 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board. |
| 100 | Supply and fix LED tube light fittings 1200 mm, 20W, 240V, 50Hz,rated input current- 0.070-0.110, rated input watt 20,higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and directed. |
| 101 | Supply and fix LED tube light fittings 600 mm, 10W, 240V, 50Hz,rated input current- 0.070-0.110, rated input watt 20, higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and directed. |
| 102 | M & L Sub main wiring complete with 2 runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories concealed in wall/Ceiling etc all as specified and as directed . |
| 103 | M & L Sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories concealed in wall/Ceiling etc all as specified and as directed . |
| 104 | Supply and fixTPN MCB DB 4 ways ,Double door with 415 Amps, Double door typecomplete all as specified and as directed . |
| 105 | Supply and fix MCB TPN 63 Amp, 415 Volt , C- series, 50 Hz, breking capacity-10 KA complete all as specified and as directed . |
| 106 | Supply and fixing factory made sheet metal enclosures SPN 8 way double door 240 Vfor DB,s suitable for having MCBflush with wall complete all as specified and directed. |
| 107 | Supply and fixing factory made sheet metal enclosures SPN 4 way double door 240 Vfor DB"s suitable for having MCBflush with wall complete all as specified and directed. |
| 108 | Supply and fixing MCB SPN 40 Amps 240 V, C- curve, 50 Hz, breaking capacity-10 kA. complete all as specified and directed. |
| 109 | Supply and fixing MCB SP 6-32Amps240 V, C- curve, 50 Hz, breaking capacity-10 kA . complete all as specified and directed |
| 110 | Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals complete all as specified and as directed |
| 111 | Supply and Fix Switch Piano,Flush type single pole , one way 5 Amp complete all as specified and as directed. |
| 112 | Supply and Fix Socket outlet 3 pin, 5 A flushPiano,Flush type complete all as specified and as directed. |
| 113 | Supply and Fix Switch Piano,Flush type single pole , one way 16 Amp complete all as specified and as directed. |
| 114 | Supply and Fix Socket outlet 2 in 1,3 pin,6 and 16 A piano flush type complete all as specified and as directed. |
| 115 | S&F fan regulator , flush stapped type ,electronic , single phase 230 volt completeall as specified and directed |
| 116 | M& L for earthing complete with & including galvanized MS earth plate of size600 x 600 x 6 mm thick, buried vertically in ground to a depth not less than 2.25 metre below ground level,with top edge of earth plate not less than 1.5 below ground level connected to galvanized earth wire soldered and riveted or connected to earth plate by means of nuts, bolts , check nuts & washers, of galvanizediron or steel all as Shown in electrical plate No. 3 of MES SSR Part- I (2009) and connected to panel board, all as specified and testing on completion including provn of earth wire 4 mmm diaduly protected with and including 15 mm dia bore medium grade GI pipe upto 7.5 (maximum) meter from electrode to earth point including provnof the earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate andGI light grade watering pipe of 20mm dia bore with funnel with wire mesh including all necessary excavation& earth work in any type of soil, returning filling in, removal of surplus soil to a distance 50 metre, PCC 1:3:6type C-1 as inearth chamber, 50 mm thick RCC cover using cementconcrete 1:2:4 type B-0 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work and MS frame using MS angle of size 40mm x 40mm x 6mmcomplete all as specified & directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to the department. |
| 117 | Supply and fixing in replacement security light bracket made of 40mm dia GI light grade pipe 1.5 metre long bend to shape including fixing on pole with suitable size of flat iron clamps, nut, bolt etc. complete all as specified and directed. |
| 118 | Supply and fixing in bldg security light fitting LED 35 W LED made up of pressure die cast aluminium housing with potted isolated driver and high power LED and indl lenses, oprating range- 90V to 340V AC. , IP66 with high power LED lamp including Taking down ofany size of bldy security light fittings complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
