Military Engineer Services-MES has published Tender For Repair Maint To And Chloronome Plant Pump Sets And Bore Wells Swimming Pool And Cleaning Of Overhead Tank Ug Sump And Repair Maint Of Ci Di Pipe Line At Af Stn Agra Under Ge Af Tech Area Agra. Submission Date for this Tender is 29-02-2024. Ductile Iron Pipe Tenders in agra Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 22-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-02-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling/opening of unserviceable AC electric motor of 3 phases 415 Volts ofany make of capacity 60 to 75HP of centrifugal/ boosting type pump from site and transporting the same to workshop & back after rewinding of motor with and including super enamelled copper winding wire of superior quality of existing size/ gauge & No of turns and insulation of the same with & including insulating material such as leatherised fibre glass insulation as per manufacturers instructions including cutting and taking out existing burnt/ short circuited winding wires complete andre-assembling of the same after repair including, commissioning and testing on completion etc complete all as directed. |
| 2 | Taking out centrifugal pump set connected with 60 to 75 HP motor from existing foundation after disconnecting all electrical connections and dismantling/ opening of unserviceablecentrifugal pump set for making it serviceable by repair/ replacement of the worn out parts / items and re-assembling/ re-fitting & re-installation of the same in existing position after complete repair including making all electrical connections, commissioning and testing on completioncomplete all as directed:- Note: Repair / Replacement of warn out parts/ items shall be measured and paid separately under relevant sch "A" |
| 3 | S&F in repairs ball bearing suitable for 60/75 HP centrifugal pump set complete all as directed. |
| 4 | S&F in repairsstainless steel pump shaft 50mm dia with neckring as per existing suitablefor 60/75 HP centrifugal pump set complete all as directed. |
| 5 | S&F in repairs rubber coupling with all fixing accessories as per existing suitable for 60/75 HP centrifugal pump set complete all as directed. |
| 6 | S&F in repairs MS coupling with all fixing accessories as per existing suitable for 60/75 HP centrifugal pump set complete all as directed. |
| 7 | S&F in repairs M/s gland plate with nuts, bolts and washers as per existing suitable for 60/75 HP centrifugal pump set complete all as directed. |
| 8 | S&F in repairs cast iron impeller as per existing suitablefor 60/75 HP centrifugal pump set complete all as directed. |
| 9 | S&F in repairs stainless steel sleeves as per existing suitable for 60/75 HP centrifugal pump set complete all as directed. |
| 10 | Dismantling/opening of unserviceable AC electric motor of 3 phases 415 Voltsof capacity 40HP of centrifugal/ boosting type pump of any make from site and transporting the same to workshop & back after rewinding of motor with and including super enamelled copper winding wire of superior quality of existing size/ gauge & No of turns and insulation of the same with & including insulating material such as leatherised fibre glass insulation as per manufacturers instructions including cutting and taking out existing burnt/ short circuited winding wires complete andre-assembling of the same after rewinding and repair etc including commissioning and testing on completion etc complete all as directed. |
| 11 | Taking out centrifugal pump set connected with 40 HP motor from existing foundation after disconnecting all electrical connections and dismantling/ opening of unserviceablecentrifugal pump set for making it serviceable by repair/ replacement of the worn out parts/ items and re-assembling/ re-fitting & re-installation of the same in existing position after complete repair including making all electrical connections, commissioning and testing on completioncomplete all as directed:- Note: Repair / Replacement of warn out parts/ items shall be measured and paid separately under relevant item of sch "A" |
| 12 | S&F in repairs ball bearing suitable for 40 HP centrifugal pump set complete all as directed. |
| 13 | S&F in repairs stainless steel pump shaft 50mm dia with neckring as per existing suitable for 40 HP centrifugal pump set complete all as directed. |
| 14 | S&F in repairs MS gland plate with nuts, bolts and washers as per existing suitable for 40 HP centrifugal pump set etc complete all as directed. |
| 15 | S&F in repairs gun metal bush 50mm dia as per existing suitable for 40 HP centrifugal pump set etc complete all as directed. |
| 16 | S&F in repairs gun metal impeller as per existing suitable for 40 HP centrifugal pump set etc complete all as directed. |
| 17 | S&F in repairs rubber coupling with all fixing accessories as per existing suitable for 40 HP centrifugal pump set etc complete all as directed. |
| 18 | S&F in repairs MS coupling with all fixing accessories as per existing suitable for 40 HP centrifugal pump set etc complete all as directed. |
| 19 | Taking out submersible pump set including motor of capacity 1.5-2.0HP with column pipe from bore well after disconnecting all electrical connections and lowering the same after necessary repair/ replacement of wornout/ damaged parts of pumps/ motors/ column pipe & pipe joints including making all electrical connections and testing on completion complete all specified and directed. Note:- Repair/ replacement of wornout/ damaged parts of pumps/ motors/ column pipe shall be measured and paid separaterly under respective items of Sch "A". |
| 20 | Taking out submersible pump set including motor of capacity 5.0-7.5HP with column pipe from bore well after disconnecting all electrical connections and lowering the same after necessary repair/ replacement of wornout/ damaged parts of pumps/ motors/ column pipe & pipe joints including making all electrical connections and testing on completion complete all specified and directed. Note:- Repair/ replacement of wornout/ damaged parts of pumps/ motors/ column pipe shall be measured and paid eparaterly under respective items of Sch "A". |
| 21 | Taking out submersible pump set including motor of capacity 10.0-12.5HP with column pipe from bore well after disconnecting all electrical connections and lowering the same after necessary repair/ replacement of wornout/ damaged parts of pumps/ motors/ column pipe & pipe joints including making all electrical connections and testing on completion complete all specified and directed. Note:- Repair/ replacement of wornout/ damaged parts of pumps/ motors/ column pipe shall be measured and paid separaterly under respective items of Sch "A". |
| 22 | Taking out submersible pump set including motor of capacity 15.0HP with column pipe from bore well after disconnecting all electrical connections and lowering the same after necessary repair/ replacement of wornout/ damaged parts of pumps/ motors/ column pipe & pipe joints including making all electrical connections and testing on completion complete all specified and directed. Note:- Repair/ replacement of wornout/ damaged parts of pumps/ motors/ column pipe shall be measured and paid separaterly under respective items of Sch "A". |
| 23 | Taking out submersible pump set including motor of capacity 30.0HP with column pipe from bore well after disconnecting all electrical connections and lowering the same after necessary repair/ replacement of wornout/ damaged parts of pumps/ motors/ column pipe & pipe joints including making all electrical connections and testing on completion complete all specified and directed. Note:- Repair/ replacement of wornout/ damaged parts of pumps/ motors/ column pipe shall be measured and paid separaterly under respective items of Sch "A". |
| 24 | Supply & lowering in bore well32mm bore high density polyethlene (HDPE) column pipe ofpressure rating 6Kg/cm2 with & including all necessaru fixing/ jointing accessories complete all as specified and directed. |
| 25 | Supply & lowering in repairs 80mm bore MS column pipe heavy grade with heavy duty MS flange welded at both end, 3.0M long with and including making flange joint with 3mm thick rubber sheet including painting with anticorosive paint & necessary nuts & bolts etc of suitable size complete all as specified and directed. |
| 26 | Supply & lowering in repairs 100mm bore MS column pipe heavy grade with heavy duty MS flange welded at both end, 3.0M long with and including making flange joint with 3mm thick rubber sheet including painting with anticorosive paint & necessary nuts & bolts etc of suitable size complete all as specified and directed. |
| 27 | Dismantling/opening of unserviceable submersible pump set of capacity 1.5-2.0HP of any make for complete servicing with materials including cleaning, grinding, polishing &rewinding of motor with PVC insulated water proof copper winding wire best quality of existing gauge & No of turns and sealing the winding by using sealing compound including cutting and taking out existing burnt winding wire and reassembling and testing after replacement of all defective parts of pump set of existing size & make complete all as directed. Note:-Replacement of all defective parts shall be measured and paid separately under respective item of Sch ‘A’ |
| 28 | Dismantling/opening of unserviceable submersible pump set of capacity 5.0-7.5HP of any make for complete servicing with materials including cleaning, grinding, polishing &rewinding of motor with PVC insulated water proof copper winding wire best quality of existing gauge & No of turns and sealing the winding by using sealing compound including cutting and taking out existing burnt winding wire and reassembling and testing after replacement of all defective parts of pump set of existing size & make complete all as directed. Note:-Replacement of all defective parts shall be measured and paid separately under respective item of Sch ‘A’. |
| 29 | Dismantling/opening of unserviceable submersible pump set of capacity 10.0-12.5HP of any make for complete servicing with materials including cleaning, grinding, polishing &including rewinding of motor with PVC insulated water proof copper winding wire best quality of existing gauge & No of turns and sealing the winding by using sealing compound including cutting and taking out existing burnt winding wire and reassembling and testing after replacement of all defective parts of pump set of existing size & make complete all as directed. Note:- Replacement of all defective parts shall be measured and paid separately under respective item of Sch ‘A’ . |
| 30 | Dismantling/opening of unserviceable submersible pump set of capacity 15HP of any make for complete servicing with materials including cleaning, grinding, polishing, including rewindingof motor with PVC insulated water proof copper winding wire best quality of existing gauge & No of turns and sealing the winding by using sealing compound including cutting and taking out existing burnt winding wire and reassembling and testing afterr replacement of all defective parts of pump set of existing size & make complete. Note:- Replacement of all defective parts shall be measured and paid separately under respective item of Sch ‘A’. |
| 31 | Dismantling/opening of unserviceable submersible pump set of capacity 30HP of any make for complete servicing with materials including cleaning, grinding, polishingincluding rewinding of motor with PVC insulated water proof copper winding wire best quality of existing gauge & No of turns and sealing the winding by using sealing compound including cutting and taking out existing burnt winding wire and reassembling and testing afterreplacement of all defective parts of pump set of existing size & make complete all as directed. Note:-Replacement of sch "A" all defective parts shall be measured and paid separately under respective item of Sch ‘A’. |
| 32 | S & F capacitor for submersible starter of suitable size upto 5HP pump as per existing including allelectrical connections and testing on completion complete all as directed. |
| 33 | Taking outsubmersiblepump sets of any capacity from existing bore wells with column pipe after disconnecting all electrical connections and refitting & lowering the same after rectifying the all defects including making all electrical connections and testing on completion complete all as directed and specifeid. |
| 34 | Supply onlythe following parts/ items of submersible pumps and bowl assembly for replacement of parts/ items under item Nos. 27 to 31 above complete all as directed:- |
| 35 | Gun metal impeller as per existing suitable for 10.0-12.5HP submersible pump sets complete all as directed. |
| 36 | Intermediate bowl as per existing suitable for 10.0-12.5HP submersible pump sets complete all as directed. |
| 37 | Rotor assembly complete with rotor shaft suitable for 10.0 - 12.5 HP submersible pump set complete all as directed. |
| 38 | Bowl bush (gun metal) as per existing suitable for 10.0-12.5HP submersible pump sets complete all as directed. |
| 39 | Gun metal impeller seal ring (neck ring) as per existing suitable for 10.0-12.5HP submersible pump sets complete all as directed. |
| 40 | Stainless steel running sleeves (off sizes) as per existing suitable for 10.0-12.5HP submersible pump sets complete all as directed |
| 41 | Impeller locking keys stainless steel (off sizes) as per existing suitable for 10.0-12.5HP submersible pump sets complete all as directed |
| 42 | Pump shaft 25.4mm dia stainless steel as per existing suitable for 10.0-12.5HP submersible pump sets complete all as directed |
| 43 | Gun metal impeller as per existing suitable for 30.0HP submersible pump sets complete all as directed. |
| 44 | Intermediate bowl as per existing suitable for 30.0HP submersible pump sets complete all as directed. |
| 45 | Bowl bush (rubber) as per existing suitable for 30.0HP submersible pump sets complete all as directed. |
| 46 | Bowl bush (gun metal) as per existing suitable for 30.0HP submersible pump sets complete all as directed. |
| 47 | Gun metalimpeller seal ring (neck ring) as per existing suitable for 30.0HP submersible pump sets complete all as directed. |
| 48 | Stainless steel running sleeves (off sizes) as per existing suitable for 30.0HP submersible pump sets complete all as directed |
| 49 | Impeller locking keys stainless steel (off sizes) as per existing suitable for 30.0HP submersible pump sets complete all as directed |
| 50 | Pump shaft 25.4mm dia stainless steel as per existing suitable for 30.0HP submersible pump sets complete all as directed |
| 51 | Gun metal impeller as per existing suitable for 5.0-7.5HP submersible pump sets complete all as directed. |
| 52 | Intermediate bowl as per existing suitable for 5.0-7.5HP submersible pump sets complete all as directed. |
| 53 | Bowl bush (rubber) as per existing suitable for 5.0-7.5HP submersible pump sets complete all as directed. |
| 54 | Bowl bush (gun metal) as per existing suitable for 5.0-7.5HP submersible pump sets complete all as directed. |
| 55 | Gun metal impeller seal ring (neck ring) as per existing suitable for 5.0-7.5HP submersible pump sets complete all as directed. |
| 56 | Stainless steel running sleeves (off sizes) as per existing suitable for 5.0-7.5HP submersible pump sets complete all as directed |
| 57 | Impeller locking keys stainless steel (off sizes) as per existing suitable for 5.0-7.5HP submersible pump sets complete all as directed |
| 58 | Pump shaft 25.4mm dia stainless steel as per existing suitable for 5.0-7.5HP submersible pump sets complete all as directed |
| 59 | PVC impeller as per existing suitable for 1.5-2.0HP submersible pump sets complete all as directed. |
| 60 | Intermediate bowl as per existing suitable for 1.5-2.0HP submersible pump sets complete all as directed. |
| 61 | Bowl bush (rubber) as per existing suitable for 1.5-2.0HP submersible pump sets complete all as directed. |
| 62 | Bowl bush (gun metal) as per existing suitable for 1.5-2.0HP submersible pump sets complete all as directed. |
| 63 | PVC impeller seal ring (neck ring) as per existing suitable for 1.5-2.0HP submersible pump sets complete all as directed. |
| 64 | Stainless steel running sleeves (off sizes) as per existing suitable for 1.5-2.0HP submersible pump sets complete all as directed |
| 65 | Impeller locking keys stainless steel (off sizes) as per existing suitable for 1.5-2.0HP submersible pump sets complete all as directed |
| 66 | Pump shaft 25.4mm dia stainless steel as per existing suitable for 1.5-2.0HP submersible pump sets complete all as directed |
| 67 | Gun metal impeller as per existing suitable for 15.0HP submersible pump sets complete all as directed. |
| 68 | Intermediate bowl as per existing suitable for 15.0HP submersible pump sets complete all as directed. |
| 69 | Bowl bush (rubber) as per existing suitable for 15.0HP submersible pump sets complete all as directed. |
| 70 | Bowl bush (gun metal) as per existing suitable for 15.0HP submersible pump sets complete all as directed. |
| 71 | Gun metal impeller seal ring (neck ring) as per existing suitable for 15.0HP submersible pump sets complete all as directed. |
| 72 | Stainless steel running sleeves (off sizes) as per existing suitable for 15.0HP submersible pump sets complete all as directed |
| 73 | Impeller locking keys stainless steel (off sizes) as per existing suitable for 15.0HP submersible pump sets complete all as directed |
| 74 | Pump shaft 25.4mm dia stainless steel as per existing suitable for 15.0HP submersible pump set complete all as directed |
| 75 | Thrust plate suitable for 10-12.5HP submersible pump set |
| 76 | Thrust plate suitable for 5-7.5 HP submersible pump set |
| 77 | Thrust plate suitable for 15 HP submersible pump set |
| 78 | Thrust plate suitable for 30HP submersible pump set |
| 79 | Dismantling/opening of monoblock/ centrifugal pump including induction motor of capacity 10.0-15.0HP after disconnecting all electrical connections and taking out the same from foundation for complete servicing with materials including cleaning, lath work of shaft, re-assembling & re-installation of the same on existing foundation, including rewinding of motor with and including super enamelled copper winding wire of existing gauge & No of turns, re-insulating, two coats varnishing & heating including cutting and taking out existing burnt winding wire and reassembling making all electrical connections and testing on completion after replacement of all defective parts of pump set of existing size & make complete all as specified and directed . Note:- Replacement of all defective parts shall be measured and paid separately under respective item of Sch ‘A’. |
| 80 | Dismantling/opening of monoblock/ centrifugal pump including induction motor of capacity 5.0 TO 7.5 HP after disconnecting all electrical connections and taking out the same from foundation for complete servicing with materials including cleaning, lath work of shaft, re-assembling & re-installation of the same on existing foundation, including rewinding of motor with and including super enamelled copper winding wire of existing gauge & No of turns, re-insulating, two coats varnishing & heating including cutting and taking out existing burnt winding wire and reassembling making all electrical connections and testing on completion after replacement of all defective parts of pump set of existing size & make complete. Note:- Replacement of all defective parts shall be measured and paid separately under respective item of Sch ‘A’ . |
| 81 | Supply onlythe following parts/ items of monoblock/ centrifugal pump set and bowl assembly for replacement of parts/ items under item Nos. 35 to 36 above complete all as directed:- |
| 82 | Ball bearing suitable for 10.0-15.0HP monoblock/ centrifugal pump set complete all as directed. |
| 83 | Stainless steelbush as per existing suitablefor 10.0-15.0HP monoblock/ centrifugal pump set complete all as directed. |
| 84 | MS sleeves as per existing suitablefor 10.0-15.0HP monoblock/ centrifugal pump set complete all as directed. |
| 85 | Ball bearing suitable for and upto 5.0 - 7.5 HP monoblock/ centrifugal pump set complete all as directed. |
| 86 | Stainless steelbush as per existing suitablefor and upto 5.0-7.5 HP monoblock/ centrifugal pump set complete all as directed. |
| 87 | MS sleeves as per existing suitablefor and upto 5.0-7.5 HP monoblock/ centrifugal pump set complete all as directed. |
| 88 | MS Impeller suitable for 5.0 -7.5 HP centrifugal/monoblock pump set complete all as directed. |
| 89 | MS Impeller suitable for 10.0 -15 HP centrifugal/monoblock pump set complete all as directed. |
| 90 | Supply and laying or fixing or passing in well/ borewell in replacement,1100 volts grade heavy duty, PVC insulated and PVC sheathed mutistranded copper conductor submesible cable of size2.5sqmm 3 core flatincluding connection to submersible motor/ starter panel with & including necessary jointing materials if required and testing on completion complete all as specified and direced. |
| 91 | Supply and laying or fixing or passing in well/ borewell in replacement,1100 volts grade heavy duty, PVC insulated and PVC sheathed mutistranded copper conductor submesible cable of size4.0sqmm 3 core flatincluding connection to submersible motor/ starter panel with & including necessary jointing materials if required and testing on completion complete all as specified and direced. |
| 92 | Supply and laying or fixing or passing in well/ borewell in replacement,1100 volts grade heavy duty, PVC insulated and PVC sheathed mutistranded copper conductor submesible cable of size 6.0sqmm 3 core flatincluding connection to submersible motor/ starter panel with & including necessary jointing materials if required and testing on completion complete all as specified and direced. |
| 93 | Supply and laying or fixing or passing in well/ borewell in replacement,1100 volts grade heavy duty, PVC insulated and PVC sheathed mutistranded copper conductor submesible cable of size 10.0sqmm 3 core flatincluding connection to submersible motor/ starter panel with & including necessary jointing materials if required and testing on completion complete all as specified and direced. |
| 94 | S&F MS nuts, bolts and washers etc of required shape & size complete all as specified and directed. |
| 95 | S&F in replacement wall mounted cubical type panel board with locking arrangement and comprising of starter, capacitor, volt meter, indicator lamp, Amp meter & MCB/cut out of capacity suitable for upto 2.0 HP single phase submersible pumping set including fixing arrangement complete all as specified and directed. |
| 96 | S&F in repairs MU-G05H DOL starter ofrelay range 14-24 Amps of capacity suitable for 05.0 HP motor, AC-3duty, 415 volts, 50 Hz, three phase including fixing arrangement complete all as specified and directed. |
| 97 | S&F in repairs MU-G10H DOL starter ofrelay range 28-42 Amps of capacity suitable for 10.0 HP motor, AC-3duty, 415 volts, 50 Hz, three phase including fixing arrangement complete all as specified and directed. |
| 98 | S&F in repairs MU-G20H fully automatic star- delta starter ofrelay range 38-52 Amps of capacity suitable for and upto 20.0 HP motor, AC-3duty, 415 volts, 50 Hz, three phase including fixing arrangement complete all as specified and directed. |
| 99 | S&F in repairs MU-G30H fully automatic star- delta starter ofrelay range45-65Amps of capacity suitable for and upto 30.0 HP motor, AC-3duty, 415 volts, 50 Hz, three phase including fixing arrangement complete all as specified and directed. |
| 100 | S&F in replacementfully automatic Star-Deltamotor starter in sheet steel enclosure type ML-4 FASDsuitable for motor ratingAC-3 duty , 415 V, 3 phase, 50 Hz, upto 50 HP, relay setting 58 to 95 Amps Cat No-SS90730 Make- L&T or equivalent in C&S |
| 101 | S&F in replacementfully automatic Star-Deltamotor starter in sheet steel enclosure type ML-6 FASDsuitable for motor ratingAC-3 duty , 415 V, 3 phase, 50 Hz, upto 75 HP, relay setting 90 to 140 Amps Cat No-SS90913 Make- L&T or equivalent in C&S |
| 102 | S & F Phase preventor for stater of suitable size upto 60 HP pump as per existing including allelectrical connections and testing on completion complete all as directed. |
| 103 | M&L replacement MS work conforming to Fe-290 (Gde E-165) in framed work for supporting/ fixing of sign boards/monoblock pumpsetand similar work including necessary welding, cutting/ making holes of required size & shape for supporting/ fixing ofmonoblock/sign board complete all as specified & directed. |
| 104 | Supply only O- Tolidine chemicalin 500ml pack. Make Qualigens or equivalent as approved by GE. |
| 105 | Supply only residual chlorine kit for testing of chlorine content in water. |
| 106 | Supply and fixing in replacementPVC insulated multistranded copper conductor cable of size 25 sqmm single core complete all as directed. |
| 107 | Supply and fixing copper lugs suitable for 25 sqmm cable |
| 108 | Supply and laying PVC flexible pipe of size 50sqmm bore complete all as directed. |
| 109 | M&L for painting of centrifugal motor pump set of capacity 60/75 HP with two coat of grey enamelled paint after scraping old paint including writing SM/MES No on pump/Motor with white colour complete all as directed.Note: letter size should not less than 20 mm in height. |
| 110 | M&L for painting of centrifugel motor pump set of capacity 40 HP with two coat of grey enamelled paint after scraping old paint including writing SM/MES No on pump/Motor with white colour complete all as directed.Note: letter size should not less than 20 mm in height. |
| 111 | M&L for painting of centrifugel/monoblockmotor pump set of capacity 7.5-15 HP with two coat of gray enemalled paint after scraping old paintincluding writing SM/MES No on pump/Motor with white colourcomplete all as directed. |
| 112 | S&F in replacement monoblock pump set of cap 1.0 HP including all necessary connection complete all as directed. |
| 113 | Supply and lowering in replacement submersible pump set of capacity 1.5 HP,single phase,50 Hz, 70 LPM at 57 Mtr Head, delivery size 32mm,stage 13 complete all as specified and directed. Make- kirloskar Model No-KP4-0713S pr equivalent in Crompton/KSB |
| 114 | Dismantling of dozing pump for carrying out comprehensive/ preventive/ repairing work, checking and rectifying defects as assured in day to day operation for overhauling required, refitting and reinstalling the plant after replacement of defective parts including testing andchecking electrical system and day to day maintenance of plants required at water supply installation by a skilled tradesman complete all as specified and directed. Notes:- i. Spares parts required for replacement shall be measured & paid separately under respective items. as supply only. ii.Only those plants shall be measured and paid which will be repaired by providing several major defective items/ parts. iii.The quoted cost shall be deemed to be included for complete checking of dozing pumps installed at different locations. iv. Contractor will responsible to carry out testing of chlorination of water of different location as required by SHO / User and testing report will be produced to Engineer-in-Charge on dailybasis after taking signature by SHO or his rep. No extra payment shall be made on this account. |
| 115 | Supply only following parts for dozing pumps of make existing atsite :- |
| 116 | Gear motor Heavy duty 0.5 HP three phase suitable for 230 Volts, 50 Hz, AC supply of existing model complete all as directed. |
| 117 | Heavy duty 90 watt, 3 ph, 220/415V, 440 RPM, 50 HZ Gear Box 90x90 ratio, SPD 30 RPM, only for mixing the soution of existing model complete all as directed. |
| 118 | PVC dosing head asembly with suction and delivery adaptor with NRV for 25 LPH. |
| 119 | PVC NRV set with glass ball for suction and delivery adaptor |
| 120 | PVC adaptor for suction and delivery without NRV |
| 121 | PVC stainer washer type heavy duty or Y type stainer for suction |
| 122 | Taflon gland square type |
| 123 | Chemical Oil seal with cap |
| 124 | Dosing agitator gear box 25 LPH |
| 125 | Heavy duty SS agitator rod with fan, PP coating, for gear Box, |
| 126 | S S Agitating rod to suit gear Motor |
| 127 | Plunger assembly without PVC dosing head 25 LPH |
| 128 | Plunger assembly with PVC dosing head complete 25 LPH |
| 129 | Heavy duty FRP preparation tank Conial type Big |
| 130 | Heavy duty FRP preparation tank capacity 150 litre (Small) |
| 131 | Heavy duty PVC NRV for delivery line |
| 132 | S&F Control Panel for dosing pump suitable for model SSAPS/CDSPT/25 made of powder coated MS fabricated box consisting of LED indicator, Digital voltmeter, Amp meter, Single phase preventor, High voltage/low voltage protection plus buzzer will on when single phase or high voltage/low voltage. |
| 133 | Supply only Swimming pool Hypochlorous HOCL in the Packing Size of 40 ltr Cane complete all as specified and directed by Engr-in -Charge |
| 134 | Supply only copper sulphate for portable water, copper sulphate pent hydrate content 98 % Impurities limit in Sealed packeg complete all as specified and directed. |
| 135 | Supply only Granular chlorination (Calcium Hypocloride having 65% to 70% chlorine contents approved by E-in-Cs branch Complete all as specified and diredted. |
| 136 | Supply only Solid Alum for swimming pool complete all as specified and directed. |
| 137 | Supply only swimming pool algaecide of minimum purity 90% in packing size of 25 Ltrs cane complete all as specified and directed. |
| 138 | M&L for Dewatering of the swimming pool and springs (fountain), cleaning the ceramic tiles with suitable chemicals & acid and rubbing the tiles with soft nylon brush to remove all the stains deposited on the tiles for complete glow to the entire satisfaction of Engineer-in-Charge- |
| 139 | M&L for Cleaning of pressure filter plant including taking out of all material from filter plant and cleaning with anti bacterial solution and reassembling includingpainting in two coatsby using synthetic enamel paints from outside includingreplacement of new rubber gasket complete all as specified and directed.:- |
| 140 | Supply and filling filter media suitable for existing pressure filter at swimming pool. Make- ion exchange or equivalent make. |
| 141 | M&L for cleaning of over head RCC Reserviorhaving single or double compartment by scraping sludge ,bleaching, sedimentsdeposition and other foreign material with wire brush from inner surface of domes, taking out including washing with bleaching powder solution /Potassium permanganate solution complete with entire satisfaction of engineer-in -chargeincluding writting date of the cleaning,due date & capacity of Tank on pillar of RCC Tank complete all as specified and directed for the following capacity and staging :- Note: (i)All T&P and risk shallbe contractor"s liability.All T&P shall be arranged by contractor without any extra cost. (ii)Sludge obtained shall be deposited at approx 50 metre away from RCC over head reservoir complete all as directed by Engr -in-Charge. |
| 142 | 50000 Gallons capacity RCC Tank having single compartment at 50 feet stagging. |
| 143 | All as per item No72.10 above but up to 60 feet stagging |
| 144 | All as per item No 72.10 above but 200000 Gallon having 2 compartment upto 60 feet stagging. |
| 145 | All as per item No72.10 above but 40000 gallons capacity RCC tank having single compartment at 60 feet stagging. |
| 146 | All as per item No 72.00above here-in-before but for RCC/Brick over head reservoir of 20000 gallons capacity at upto 50 feet stagging. |
| 147 | All as per item No72.00above here-in-before but for RCC/Brick over head reservoir of 10000 gallons capacity at upto 40 feet stagging. |
| 148 | Allas per item No 72.00 here -in -before but under ground RCC reservoir of following capacity :- . |
| 149 | 120000 gallons capacity . |
| 150 | 100000 gallons capacity. |
| 151 | 50000 Gallons capacity. |
| 152 | 40000 Gallons capacity. |
| 153 | 20000 gallons capacity. |
| 154 | 10000/8000 gallons capacity. |
| 155 | M& L for replacement of man holecover of OHT & valve pit chamber covermade out of 3.0mm thick MS sheet fixing withnew MS angle iron frame made out of 50x 50x 6mm thick and making necessary locking arrangement including painting with one coat of synthetic enamelled paint over and including one coat of red oxide or non corrosive paint & required PCC work complete all as specified and directed. |
| 156 | M&L for replacement of ladder of over head reservoir / under ground sumps made out by using MS angle iron frame of suitable size and forged into spike of any size including painting with black bituminous paint of two coat over a coat of red oxide primer complete all as specified and directed. |
| 157 | M&L for collection of water samples from various bore wells located at different area of air force station Agra in white colour PVC containers of capacity not less than 5.0 litre, hygenically dry, neat & clean duly sealed and transporting the same to laboratory for followings tests of drinking water for portability charaterstics/parameter as per IS 10500-2012 from Government approved/certified laboratory seperately for each bore well and submit the test results / reports of water samples (bore well wise) to Engineer in charge for maintain the record at bore wells/sub division level complete all as specified and directed;- (a)PH Value (Ref. Std & test method as per IS 3025 P11) (b) Sulphate as SO4(Ref Std & test method as per IS 3025 P24) (c) Chloride as Cl (Ref Std & test method as per IS 3025 P32) (d) Odour Smell (Ref Std & test method as per IS 3025 P 05) (e) Taste- potability (Ref Std & test method as per IS 3025 P 07) (f) Total Hardness as CaCo3 (Ref Std & test method as per IS 3025 P21) (g) Total dissolved Solids- TDS (Ref Std & test method as per IS 3025 P16) (h) Calcium as Ca (Ref Std & test method as per IS 3025 P 40) (j) Magnesium as Mg (Ref Std & test method as per IS 3025 P 46) (k) Total Alkanity (Ref Std & test method as per IS 3025 P23) (l) Sulphate as SO3 (Ref Std & test method as per IS 3025 P28) (m) Dissolved Oxygen (Ref Std & test method as per IS 3025 P38) |
| 158 | M&L for collection of water samples from various bore wells located at different area of air force station Agra in white colour PVC containers of capacity not less than 10.0 litre, hygenically dry, neat & clean duly sealed and transporting the same to laboratory for followings tests of drinking water for portability charaterstics/ parameter as per IS 10500-2012 from Government approved/ certified laboratory seperately for each bore well and submit the test results / reports of water samples (bore well wise) to Engineer in charge for maintain the record at bore wells/sub divnision levelcomplete all as specified and directed;-(a) Lead(Ref Std & test method as per IS 3025 P47) (b) Mercury (Ref Std & test method as per IS 3025 P48) (c) Zink (Ref Std & test method as per IS 3025 P49) (d) Arsenic (Ref Std & test method as per IS 3025 P37) (e) Copper (Ref Std & test method as per IS 3025 P42) (f) Cadmium (Ref Std & test method as per IS 3025 P41) (g) Iron (Ref Std & test method as per IS 3025 P53)(h)Flouride (Ref Std & test method as per IS 3025 P16)(j) Ammonia (Ref Std & test method as per IS 3025 P60) (k) Nitrates & Nitrites (Ref Std & test method as per IS 3025 P34) (l) pesticides and poly nuclear bromides hydro carbons (AOAC/ISO (m) cynides (Ref Std & test method as per IS 3025 P27) (n) selenium (Ref Std & test method as per IS 3025 P56)Note : for item No 78.00 & 79.00:water testing will be carried out fromDayal Bagh university or any government approved LAB |
| 159 | M & L earthing complete with GI plate electrode 600x600x6.0mm thick buried directly in ground vertically in pit of depth not less than 2.25 mtr below normal ground level with top edge of the earth plate not less than 2.50 mtr below normal ground level connected to GI strip 25x4 mm as earthing lead by means of bolts, nuts, check nuts and washers of brass connected, including gun metal or phosphorus bronze of size 75x75x25 mm drilled and screwedincluding 3 Nos 8 mm dia 25 mm long hexagonal head screwed all as specified including excavation and earth work in any type of soil and disposal of surplus soil, incl 40 mm Gl tubing medium grade and necessary fitting for protection of GI strip incl filling of charcoal, dust and common salt in alternate layers,PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in earthpit with 40 x 40 x 6mm MS angle iron frame ,RCC cover 40mm thick (1:2:4) type BO using 12.5mm graded stone aggregate, reinforced with 8mm dia round bar @ 75mm C/C both way with MS handle 20mm dia, plastering 15mm thick in CM (1:6:) internally and upto 150mm below ground level externally. PGI funnel with wire mesh, 20mm dia meidum grade Gl pipe for watering complete all as shown on electrical plate No.3 of SSR Part -1 (2009) and connected in earth test including testing completed all specified and directed. |
| 160 | M&L for painting of exposed surface of water pipe line of size 80/100 mm bore with two coat of synthetic enamelpaint on old painted surface including arrow marking with suitable colour including preparation of surface for painting complete all as specified and directed. Note colour of paint will be approvedby Engr-in-Charge / GE |
| 161 | M&L for painting of exposed surface of water pipe line size 150/200/300 mm bore with two coat of synthetic enamelpaint on old painted surface including arrow marking with suitable colour including preparation of surface for painting complete all as specified and directed. Note colour of paint will be approvedby Engr-in-Charge / GE |
| 162 | M&L for painting of exposed surface of water pipe line size 80/100mm bore on main raising and delivery line fixed on over head tank having 20 to 21 mtr staging with two coat of synthetic enamelpaint on old painted surface including arrow marking with suitable colour including preparation of surface for painting complete all as specified and directed. |
| 163 | M&L for painting of old exposed surface of water pipe line size 150/200 mm bore on main raising and delivery line fixed on over head tank having 20 to 21 mtr staging with two coat of synthetic enamelpaint on old painted surface including arrow marking with suitable colour including preparation of surface complete all as specified and directed. Note : for item No 83 to 84 : The quoted rate shall be deemed to be included following provision. (a) Contractor will provide all T&P and safety equipment required at site. (b) The conractor will be fully responsible for safety and precaution of labour employed at site for painting of pipe line at OHT (c)colour of paint will be decided by Engr-In-Charge/GE |
| 164 | Taking up/down GI tubing in any length including fitting from trenches, walls, ceilings for relaying/replacement for the following sizes all as specified and directed :- |
| 165 | 40 mm bore tubing |
| 166 | 50 mm bore tubing |
| 167 | 80mm bore tubing |
| 168 | 100mm bore tubing |
| 169 | M&L for Laying only in trenches GItubing in any length with connectionsas retrieved from item No 85.00 here-in-before after cleaning, washing or removing old screw thread as required &providing new fittings, as required, complete all as specified and directed for the following sizes :- |
| 170 | 40 mm bore tubing |
| 171 | 50 mm bore tubing |
| 172 | 80mm bore tubing |
| 173 | 100mm bore tubing |
| 174 | M&L for laying or fixing only, GI tubing with connections in any length as retrieved from item No 85.00 here-in-before, fixed to wall, ceiling or laid in floor after cleaning, washing or removing old screw thread as required &providing new fittings, wherever required, complete all as specified and directed for the following sizes :- |
| 175 | 40 mm bore tubing |
| 176 | 50 mm bore tubing |
| 177 | 80mm bore tubing |
| 178 | 100mm bore tubing |
| 179 | Supply, laying, testing GI tubing medium grade in trenches in any length including required GI fitting complete all as specified and directed for the following bore :- |
| 180 | 40 mm bore tubing |
| 181 | 50 mm bore tubing |
| 182 | 80mm bore tubing |
| 183 | 100mm bore tubing |
| 184 | M&L infor drilling & tapping cast iron mains in position for branch connection of 40/50mm bore GI pipe with MS clamps including necessary earth work if required and making good the surfaces etc complete all as specified and directed. |
| 185 | Supply & fixing in renewal gun metal globe gate valve with iron wheel head, screwed both ends ISI marked for the following sizes all as specified & directed :- |
| 186 | 50mm bore |
| 187 | 40 mm bore |
| 188 | Supply & fixing in renewal of cast iron body sluice valve ISI marked PN 1.6 and conforming to IS 14846 with stainless steel spindle of following sizes :- |
| 189 | 300 mm bore |
| 190 | 200 mm bore |
| 191 | 150 mm bore |
| 192 | 100 mm bore |
| 193 | 80 mm bore |
| 194 | Supply & fixing in renewal of non return valve ISI marked including complete fixing accessoriesof following sizes:- |
| 195 | 150 mm bore |
| 196 | 100 mm bore |
| 197 | 80 mm bore |
| 198 | Excavation in trenches in soft/loose soil n. exc 1.5 Mtr wide and not exc. 1.5 M deep and getting out including forming bottom surface for laying of pipes complete all as specified and directed. |
| 199 | Returning filling in including spreading, leveling, watering and well ramming in layers not exc 25 mm thick complete all as specified and directed. |
| 200 | Removal of excavated material to a distance not exc 50 Meter and depositing wheredirected at a level not exc 1.5 M above the starting point complete all as specified and directed. |
| 201 | Taking up cast iron water mains in any length (including all fittings), with flanged/spigot and socket ends and lead joints including burning out joints and recovering lead for thefollowing cast iron water mainscomplete all as specified and directed. |
| 202 | 100 mm dia |
| 203 | 150 mm dia |
| 204 | 200 mm dia |
| 205 | 300 mm dia |
| 206 | Relaying of CI/DI pipe of following dia obtained from item No 96 above in any length complete all as specified anddirected. |
| 207 | 100 mm dia |
| 208 | 150 mm dia |
| 209 | 200 mm dia |
| 210 | 300 mm dia |
| 211 | M&L for DI pipes ISI marked of make as specified with spigot and socket ends suitable for tyton joints, centrifugally cast, class K-9, in any length coforming to IS: 8329(2000) as per latest amendments, laid in trenches with & including all DI specials/fittings such as bend, elbow, tee, reducer etc andmaking rubber gasket joints (Tyton joint) and testing on completion complete all as specified and directed for the following sizes:- |
| 212 | 100 mm dia |
| 213 | 150 mm dia |
| 214 | 200 mm dia |
| 215 | 300 mm dia |
| 216 | M & L for construction of brick masonry valve pit with sub-class "B" brick built in cement mortar (1:6), of size (90 x 90 x 90) cm (internal dimension) with one brick thick walling and150 cm x150 cm x 10 cm base foundation with PCC (1:3:6), type C2, cement plastering 10 mm thick with cement mortar (1:4) on internal & exposed surfaces, of brick work with andincluding MS cover of size 01mtr x 01mtr made out from 3 mm thick MS sheet iwith (40 x 40 x 5) mm angle iron framing& paintingthe steel surfaces with two coats of synthetic enamel paint (first quality) over a coat of red oxide primer, including necessary excavation and earth work and . demolition of the existing old valve and removal of old dimolished materials and surplus excavated soil to a distance n-exc 50m etc complete all as specified and as directed. |
| 217 | Repair/Maintenance of water level controller/display monitor with programable IC, software, Power supply and Mother board as required all as specified and directed. Make Ecobrim, Ecoguard. |
| 218 | Supply, and fix in replacement and commissioning of signal repeater (Repeater Booster) for re-transimitting the data signal of transmitters to further distance if the controllers are installed beyond the signal range of transmitters.1) operating fqz 433.43mhz.2) Free band frequiency all as specified and directed. |
| 219 | Supply and fix inreplacement Digital Water Level Data Transmitter: (tank depth 15 feet), battery solar powered water level data transmitter of data wirelessly to controller cum reciver unit to indicate water level of tank. 2) The operating voltage of transmitter unit is 3.2 Volt D.C., 3)The maximum range of the signal will be 1000 meter at clear line of sight.4)Maximum error in water level ±2% all as specified and directed.Make Ecobrim Aqualife, Ecoguard. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
