|
| 1 | Demolition of cement concrete of any description and in any description and in any poisition not otherwise specifically provided for complete all as specified and directed. |
| 2 | M&LPCC 1:2:4 type B1(using 20mm graded stone aggregate) as in roof padding concrete as in leveling course to maintain the true roof slope, roof kerb or mud stops rounded or chamfered in edges etc, finish even & smooth without using extra cement,complete all as specified and directed |
| 3 | M&L for apply acrlic based waterproofing flexible liquid applied single component, weather resistant acrylic waterprrofing membrane for all types of exposed roof slabs (new and old) terraces (slopped and flat) etc ultra voilet rays and heat reflecting system complete all as specified and directed. |
| 4 | Dismantling structural steel work as in roof trusses, rafters, purlin etc complete all as specified and directed. |
| 5 | S&F mild steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1998 grade St-240 with and including one shop coat of zinc chrominium primer paint complete all as specified and as directed. |
| 6 | S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riverted or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters walk ways railings framework of water tanks and similar work conforming to Fe 290. Gde-E-165 complete all as specified and directed. |
| 7 | M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applyingtwo coat of synthetic enamel paintover one coat of red oxide primer complete all as specified and directed. |
| 8 | Dismantling asbestos cement corrugated sheets/PVC sheets in roof covering complete all as specified and directed. |
| 9 | M&L for Pre-painted galvalume alu. Zinc coating GI based corrugated steel sheet 0.50 mm thick (total coated thickness) of any colour having tensile strength 550 M pa minimum yield strength as in roof covering fixed using hot dip galvanized self drilling and selftapping screws neoprene and EPDM washers. (Note : minimum, yield strength 550 Mpa with hot dip alloy of 55% Aluminium, 43.5 %zinc, 1.5% Silicon and finished with resin coat on both surfaces) complete all as specified and directed. |
| 10 | M&L for Pre-painted galvalume alu. Zinc coating GI based Plain steel sheet 0.50 mm thick (total coated thickness) of any colour having tensile strength 550 M pa minimum yield strength as in ridges of roof covering fixed using hot dip galvanized self drilling and selftapping screws neoprene and EPDM washers. (Note : minimum, yield strength 550 Mpa with hot dip alloy of 55% Aluminium, 43.5 %zinc, 1.5% Silicon and finished with resin coat on both surfaces) complete all as specified and directed. |
| 11 | Demolition of brick work orstone/ boulder masonry, built in cementmortar including all quoins, pillars etc complete all as specified and directed. |
| 12 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m meanradius builtin cement mortar 1:6 etc,complete all as specified and directed. |
| 13 | All as per Item No 12.00 herein-before except brick built in CM (1:6) |
| 14 | Demolition of PCC in ground floors and pavings not exc 15 cm thickness below or above ground level, complete all as specified and as directed. |
| 15 | M&L forCement concrete type D 2, 1:4:8 (using 40 mm gradedstone aggregate) in sub base of flooring,mass filining and foundation complete all as specified. |
| 16 | M&L Cement Concrete type B-2, 1:2:4 (40mm graded aggregate), 100 mm thick as in floor/hardstandinglaid in alternate bays, finishing Concrete Surfaces even and Smooth without using extra Cement, complete all as specified and as directed. |
| 17 | M&L Cement Concrete 1:3:6 (40mm graded aggregate), 75mm thick as in plinth protection/flooring laid in alternate bays, finishing Concrete Surfaces even and Smooth without using extra Cement, complete all as specified and as directed. |
| 18 | M&L for 40 mm PCC 1:2:4 type B1 (using 20mm graded stone agg)as in floors finished rough to received tiles etc complete all as specified and directed. |
| 19 | M&L Cement concrete work in pavement/hard standing of flexural strength 40 kg/per square centimeter in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and directed by Engr-in-Charge. |
| 20 | Taking down cement plaster from brick or stone walls, etc including rakingout joints , hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 21 | M&L for Rendering 15mm thick on brick work or concrete surface on wallin cement mortar 1:4 finished even and smooth without using extra cement all as specified. |
| 22 | M&L for 15 mm thick plaster in Cement Mortar 1:6 on fair faces of brick work , finished even & smooth without using extra cement complete all as specified and directed. |
| 23 | M &L for 10mm thick rendering in cement mortar1:4 to the surfaces of ceiling/chajja/fa/fascia and finishing even and smooth without using extra cement complete all as specified. |
| 24 | M & Lpreparation of newly plastered surfaces of ceiling/chajja /fascia and applying three coats of white wash, complete all as specified and directed. |
| 25 | M & Lpreparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening, complete all as specified and directed by Engineer-in-Charge. |
| 26 | M&L for preparation of newly plastered surface and applying two coats of cement base paint over a coat of alkali resistant primer etc complete all as specified and directed. |
| 27 | Taking down chowkat or frame with shutters area not exc 1.5 Sqm each (without taking off the shutters from the frame) including irom mongrey andcutting holes for hold fasts & making good complete all as specified & directed. |
| 28 | Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified & directed. |
| 29 | S&F pressed steel frame for door with one or more rebates size 125x60mm including necessary fixing lugs, lock striking plates,hinges,hold fast etc. complete size /profile of frame as per IS incl filling cement concrete type B-1 (1:3:6) filling and cpaction in frame complete, all as specified and directed. |
| 30 | S&F Pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. incl filling cement concrete type B-1 (1:3:6) filling and cpaction in frame complete, all as specified and directed. |
| 31 | S&F 30mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both side and both faces covered with approved pattern with decorative coloured laminated (machine pressured) type 1 of 0.9mm thick and all ground side faces covered with 10mm thick first class HW liping duly polished complete all as specified & directed. |
| 32 | S&F factory made plain framed paneled shutter 35 mm thick IIndclass HW (any number & Panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on bothface, the size of rail and style kiln seasoned and chemically pressure treated as spd and directed. |
| 33 | S & F factory made 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter ,divided into squares with plain chamfered rounded, mitered and rebated sash bars complete all as specified. |
| 34 | S&F Solid PVC Door Frame of size 50x47mm made out of 5.0mm plain colour PVC Sheet reinforced with Mild Steel Square Tube, and fixing in Opening as per Specifications and Drawing, complete all as specified and as directed. |
| 35 | S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (style) consisting of frame made out of Mild Steel Tubes for Top & Bottom Rails having Mild Steel Frame shall be covered with heat moulded plain colour PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and plain colour PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either side and as gap insert for Top Rail & Bottom Rail; Panelling of plain colour PVC Sheet to be fitted in the Mild Steel Frame welded/ sealed to the Stiles and Rails with suitable PVC Sheet Beading and joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Drawing, complete all as specified and as directed. |
| 36 | M&L for preparation of new wooden surfaces and applying two coat synthetic enamel paint over one coat of pink primer of any description not otherwise described over 10 cm width or girth complete all as specified and directed. |
| 37 | S & F factory made steel window with combined frame for sidehung openable double shutters, ieglazed shutters with glazing bars dovetail or welded. and another side,wire gauge shutterswith out glazing bars dovetail or weldedincluding box type hinges with steel handles and steel peg stays in both glazed and wire gauge shuttersincluding 08 Nos lungs ( Total four numbers shutters ie. two numbers openableglazed shutters on one side and two numberswire gauzed shutters on another side of window frame) complete all as specified and directed. |
| 38 | S&F 100mm stainless steel, butt hinges medium weight complete all as specified and directed. |
| 39 | S&F aluminum anodized barrel tower bolts of extruded section andfixed 150 mm long complete all as specified and directed by Engr-in-Charge. |
| 40 | S&F aluminum handles cast type anodized 150 mm size complete all as specified and directed by Engr-in-Charge. |
| 41 | S&F Aluminium anodised , sliding door bolt with hasp , staples (bolt type) and fixing clipsof sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed. |
| 42 | S & F 140mm door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed complete all as specified and directed. |
| 43 | Supply and fixing of steel door spring of size 200mm to wooden/steel frame by welding or screwing as which ever is appropriate for fixing in frame complete all as specified and directed. |
| 44 | S & F including fabricating of aluminium powder coated having minimum thickness of powder coating 50 micron for door / window / ventilator frame, shutters and partition including necessary joining cleats, glazing clips, aluminium snap beading having minimum wt 100gm/RM, rubber neoprene gasket, screws, dash fasteners, rawel plug for fixing of screw in wall or floor etc. aluminium sections as approved by GE complete all as specified and directed. |
| 45 | S&F aluminium grills of size exc 5mm x 7.5mm and aperture n. exc 80 mm incl fixing with aluminium channel 1mm thick with steel screw and tint match with existing complete all as specified and as directed |
| 46 | S&F galvanized stainlesssteel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window, completed all as specified and directed. |
| 47 | S&F in repair galvanized stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window, completed all as specified and directed. |
| 48 | Supply and fixing plain Sheet Glass3.0 mm thick, Square or Rectagular, area not exc. 0.50 Sqm in Each Pane and fixing to Aluminium Window, Ventilator Shutters, complete all as specified and as directed. |
| 49 | Supply and fixing Sheet Glass ordinary quality, 4.8 mm thick, Square or Rectagular, area not exc. 0.50 Sqm in Each Pane and fixing to Aluminium Frame, Window, complete all as specified and as directed. |
| 50 | Supply and fixing Sheet Glass ordinary quality, 6.30 mm thick, Square or Rectagular, area not exc. 0.50 Sqm in Each Pane and fixing to Aluminium Frame, Window, complete all as specified and as directed. |
| 51 | Supply and fixing frosted Sheet Glass, 4.00mm thick, Square or Rectagular, area not exc. 0.50 Sqm in Each Pane and fixing to wooden/steelAluminium Frame, ventilator, complete all as specified and as directed. |
| 52 | Demolition of Stone slabs of any description or thickness in floors / kitchen platforms etc., complete all as specified and as directed. |
| 53 | M&L for Machine cut kota stone slab 20-25mm thick as in flooring laid over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thick screed bed or bedding layer in CM (1:6)complete, all as specified and directed |
| 54 | All as per Item No 53.00 here-in-before but in riser of steps, skirting, dado and pillar including 10mm thick rendering in CM (1:4) |
| 55 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises, complete all as specified and as directed. |
| 56 | M&L for non skid, coloured ceramic tiles 7-8 mm thick of approved colour (square/rectangular) area of each tiles exc 0.06 but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of coloured tiles over & includind 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed |
| 57 | M&L, glazed vitrified ceramic coloued tiles 10 mm thick, area of each tiles n. exc 0.36 sqm in floors, set and pointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick scarred bed in cement mortar 1:6 complete all as specified and directed |
| 58 | All as per sl item No. 57.00 here-in-before but, on vertical surfaces over and including 10 mm thick rendering in CM 1:3 |
| 59 | M&L for glazed ceramic tiles 450x300 x 6-7mm thick coloured on vertical surfaces such as skirting/dados etc,set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and includingrendering 10 mm thick in cement motar 1:4 on wall complete all as specified. |
| 60 | M&L forchequredtiles of approveddesign,colour &of ( size200mmx200mmx25mm) set and jointed in neat cement slurry and pointed in colouredcement to match the shade of tiles & including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed |
| 61 | M&L for factory made Machine pressed precast interlocking tiles/paver ISI Marked , 60mm thick, coloured , glossy finishof M-35 grade concrete of desgin & pattern approved by GE ,& laid dry with different colours of tiles as directedin footpath /hard standing etc and filling of joints with fine sand complete all speciified and directed. |
| 62 | M & L stone dust for bed cushioing of tilescomplete all as specified and directed |
| 63 | M & L for providing cement concrete type C11:3:6 (20mm graded stone aggregate as in filling in hole fast blocks and like complete all as specified and direcetd. |
| 64 | S&F in repair stainless steel fency type Darpery Rod 25mm inner dia with brackets and both side decorative type latto, desinge and pattern approved by GE complete all as specified. |
| 65 | S&F in repair PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, syphonic action type with Inlet, Ball Valve, Float and handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed-in-repairs, complete all as specified and as directed. |
| 66 | M&L for1.00mm thick plain, black, mild steel sheeting, in ridges,hips, gates, valley gutters,drip and straight flashings (length and girth as fixed)etc complete all as specified. |
| 67 | M&L Mild steel work wire netting of galvanised steel wire, 1.40mm dia and 25 mm dia aparature etc complete all as specified. |
| 68 | S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest and \"S\" or \"P\" traps(cast iron 100mm bore) (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etccomplete all as specified in SSR and complete all as specified and directed. |
| 69 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, ( excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc., completeall as specified and directed. |
| 70 | S&F in repair seat cover of Vitreous china, pedestal pattern water closet including mild steel CP hinges complete all as specified anddirected by Engr-in-charge. |
| 71 | S&F in repair Brass chromium plated health faucets/jet spray with flexible pipe length not less than 1.00 (minium) fixed for EWC/IWC suitable for 15mm bore pipe complete as directe |
| 72 | S & F in repairVitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but including brackets, waste pipe and PVC waste coupling and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed. |
| 73 | S&F, in repairs vitreous china urinals half stall incld providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinals including fixing and provision of CP brass spreders complete. |
| 74 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe( overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm), complete all as specified and directed. |
| 75 | S&F in repair 1.00 mm thick stainless steel plate rack ofover all size 600x900x100 mm of standard pattern complete all as specified and directed. |
| 76 | S & F in repair fancy type angle stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed. |
| 77 | S & F in repair fancy type stop cock (Concealed type), 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed,complete all as specified and as directed. |
| 78 | S & F in repair Bib taps, 15 mm dia, cast copper alloy, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed. |
| 79 | S&Fin repair pillar tap 15mm dia long body,chromium plated, fancy type screwed down high pressure, with or without lettered \"Hot\" or \"Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified & directed. |
| 80 | S&F in repairs PVC connections 15mm size of PTMT of 450mm long. complete all as specified and directed. |
| 81 | S&F in repair stainless steel grating 100 mm dia with waste hole fixed in cement complete all as specified and directed. |
| 82 | S&F in repair Mirror 600x450mm, Beveled Edge, Selected quality Glass, mounted on 6mm thick AC Building Board or Commercial Plywood and fixed to Wooden Plugs with Chromium plated Brass Screws and Cup Washers and fixed-in-repairs, complete all as specified and as directed. |
| 83 | S&F in repair Brass Chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges and fixed-in-repairs, complete all as specified and as directed. |
| 84 | S&F in repair CP soap dish with glass finish (Glossy) complete all as specified and directed. |
| 85 | S&F in repair 15mm bore bib taps, two way cast copper alloyhalf turn valve handle, chromium platedfancy type complete all as specified and directed. |
| 86 | S&F in repairs overhead shower ABS Round with 225mm SS Arm & flangejoint chromium plated screwed down 15mm bore Make : Prayag Cat No BS-69 or equivalent in Hindware/Cera complete all as specified and directed by Engr-in-Charge. |
| 87 | S&F in repairs PTMT waste pipe 32 mm bore of length up to 80 cm for WHB / sink/unrinal pots, complete all as specified and directed. |
| 88 | S&Frotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with all fittings such as dead plugs and checknutsetc. of 20 mm dia including dismantling of old PVCtank(Capacity 250- 500 Litres) & removing to where directed complete all as specified and as directed. |
| 89 | S&Frotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with all fittings such as dead plugs and checknutsetc. of 20 mm dia including dismantling of old PVCtank(Capacity 500- 1000 Litres) & removing to where directed complete all as specified and as directed. |
| 90 | S&Frotational moulded polythene water storage tank of capacity 2000 ltrs (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with all fittings such as dead plugs and checknutsetc. of 25 mm dia including dismantling of old PVCtank(Capacity exc 1000 & n exc 2000 Litres) & removing to where directed complete all as specified and as directed. |
| 91 | S&F ball/ float valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed 20mm bore pipe minimum weight 210 gms complete all as specified and as directed. |
| 92 | S&F ball/ float valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed 25mm bore pipe minimum weight 455 gms complete all as specified and as directed. |
| 93 | S & F in repair Gun-metal, globe or gate valve, 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed. |
| 94 | S & F in repair Gun-metal, globe or gate valve, 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed. |
| 95 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal from sitecomplete all as specified andasdirected. |
| 96 | Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal from sitecomplete all as specified andasdirected. |
| 97 | S&F GI tubing 15mmbore medium grade with and including all fittings and fixed to wall, floor and ceiling etc complete all as specified andasdirected. |
| 98 | S&F GI tubing 20mm dia bore medium grade with and including all fittings and fixed to wall, floor and ceiling etc complete all as specified andasdirected. |
| 99 | Taking down eaves gutters and PVC rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 100 | S & F110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed. |
| 101 | S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed. |
| 102 | S&F 100 mm bore PVC (SWR) bends and fixed in position with adhesive complete all as specified and directed. |
| 103 | S&F 110 mm bore PVC (SWR) single T and fixed with adhesive |
| 104 | S&F 100 mm bore PVC floor traps laid in floors and fixed in position with adhesive. |
| 105 | Dismantling of cast iron orreinforced concrete drain pipe 100/75 mm dia jointed in cement mortar and taking out of trenches complete all as specified |
| 106 | S&F 100 mm bore cast iron spun soil, waste and vent pipein any length with or without ears with cement joints laid intrenches or in floors complete all as specified and directed. |
| 107 | S&F 100 mm bore cast iron spun soil, waste and vent pipein any length with or without ears with cement joints laid in walls fixed with suitable length ofFI clamp of size 25x 3 mm, ( FI clamp shall be fixed with two numbers nut and bolts of size 50 mm long 8 mm dia with suitable size of rawl plug on each clamp)at the rate of 1.20 mtr centre to centre complete all as specified and directed. |
| 108 | S&F 75 mm bore cast iron spun soil, waste and vent pipein any length with or without ears with cement joints laid intrenches or in floors complete all as specified and directed. |
| 109 | S&F 75 mm bore cast iron spun soil, waste and vent pipein any length with or without ears with cement joints laid in walls fixed with suitable length of FI clamp of size 25x 3 mm, ( FI clamp shall be fixed with two numbers nut and bolts of size 50 mm long 8 mm dia with suitable size of rawl plug on each clamp)at the rate of 1.20 mtr centre to centre complete all as specified and directed. |
| 110 | S&F cast ironsoil waste bends for 75 mm bore of pipe(any radius) plain bendcomplete all as specified and directed. |
| 111 | S&Fcast iron branch pieces of 75mm bore pipe, single (equal or un equal) ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors complete all as specified and directed. |
| 112 | S&F cast iron bend (any radius) disminshing pieces or tapers (larger bore measured) with oval access door for 100 mm cast ironsoil waste pipe complete all as specified and directed. |
| 113 | S&FCI socket (double) collars for100mm dia pipe with cement jointfixed to wall complete all as specified and directed. |
| 114 | S&F cast iron floor trap, for 75mm diameter of outletwith grating includingjointing to waste pipe fixed in cement concrete 1:2:4 type B-1 (using 20 mm graded stone agg)complete all as specified and directed. |
| 115 | M&L for Cast Iron Gully trap of size 180 x 150 mm square or round mouthed type \"S\" complete all as specified and directed. |
| 116 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash,complete,all as specified & as directed. |
| 117 | M&L for preparation of old surfaces (plastered or unplastered) of ceiling including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on ceiling,complete,all as specified &directed. |
| 118 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of white wash on wall,complete,all as specified & as directed. |
| 119 | M&L for applying 1mm thick wall care putty over wall/ceiling surfaces etc complete all as specified and directed. |
| 120 | M & L for one coat of oil emulsion distemper on old decorated surfaces walls plastered or unplastered , including preparation of surfacesby washing, rubbing down and stopping of distempered surfaces, completed all as specified and directed. |
| 121 | M&L for complete removal of existingtreatment from old surfaces of walls including cornices and applying two coats of oil emulsion distemper on putty prepared surface complete all as specified and directed |
| 122 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of cement base paint,complete,all as specified & as directed. |
| 123 | M&L complete removal of existing treatment including cleaning of motar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and applying two coats of cement base paint of approved shade/tint with alkali fungal & resistant primer etc complete all as specified and directed. |
| 124 | M&L forpreparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel paint,complete all as specified and as directed. |
| 125 | M&L for complete removal of paint from old steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel work of any description over 10 cm width or girth complete all as specified and directed. |
| 126 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of exterior emulsion wall paint on bands/ facia and wallsComplete all as specified and as directed. Note : Colour will be decided by Engr- in-Charge. |
| 127 | M&L for rewriting/repainting to existing writing letters or figures not exc 30 cm height in block Roman, Italian or Indian letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) including two coats of oil paint over a coat white basesynthetic enamel paint complete all as specified and directed. |
| 128 | Cleaning of existing drain of any size or shape by removing sludges/silt/earth (liquid, semisolid & solid) completely and removing the rubbish to a distance exc 250 m but not exc 500m and deposited where directed. |
| 129 | Cleaning away all grass vegetation saplings, shrubs, brush wood under growth roots, bushes of any height/dia on roof top/chajja of buildings of any height making repairing of roof/chajja by rendering/pointing (in CM 1:3)/laying cement concrete 1:2:4 (12.5mm graded aggregate) to make the roof/chajja surface smooth and free flow of water and removing rubbish out of the MD land upto any distance upto entire satisfaction of Engr-in-Charge. |
| 130 | S&F 50 mm thick Pre cast cement concrete jallies type B0 1:2:4 (12.5mm graded aggregate) set in cement mortar 1:4including all mouldings, chamfers, weathering, throating etc including demolition of old complete all as specified and directed. |
| 131 | NOTE:- Site clearance of materials- All demolished material obtained from dismantling/demolition items shall be deposited at place shown by Engr-in-charge properly spread and levelled and site to be cleaned to the entire satisfaction of Engr-in-charge otherwise panel recovery to a sum of Rs. 25000.00 be deducted from dues without any prior intimation |
