Military Engineer Services-MES has published Tender For Repair To Flooring, Plastering, Sanitary Fitting, Plumbing Works, Wall Panelling, False Ceiling, Joinery Works And Other Misc Works Under Aor Of Age B/R-V Under Ge (N) Bathinda At Bathinda Mil Stn. Submission Date for this Tender is 26-02-2024. Civil Work Tenders in bathinda Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-Feb-2024 | Corrigendum No 1 | Date | 26-02-2024 |
| 2 | 20-Feb-2024 | Corrigendum No 2 | Financial Bid | 26-02-2024 |
| Sl. No. | Item Description |
| 1 | SCHEDULE "A" B/R Works |
| 2 | Taking down cement plaster of any description on brick or concrete surfaces, etc. including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in- charge. |
| 3 | Material and Labour for rendering 15 mm thick in cement mortar (1:6) on other than fair face of brick work or concrete surfaces of walls and finishing the surface even & smooth without using extra cement complete all as specified and as directed by Engineer-in- charge. |
| 4 | Material and Labour for rendering 15 mm thick in cement mortar (1:4) on other than fair face of brick work or concrete surfaces of walls and finishing the surface even & smooth without using extra cement complete all as specified and as directed by Engineer-in- charge. |
| 5 | Material and Labour for rendering 5 mm thick in cement mortar (1:3) on brick work or concrete surfaces as in ceiling in two layers other than fair faces finishing the surface even & smooth without using extra cement complete all as specified and as directed by Engineer-in- charge. |
| 6 | Material and labour for newly plastered of walls applying two coats of oil bound distemper (washable) over a coat of wall care putty on plasteredsurfaces complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other mean, washing down with water and applying twocoats of cement base paint as per approved tint/colour byusing paint brush complete all as specified and as directed by Engineer-in-Charge. |
| 8 | Material and labour for preparing newly plastered or concrete surface of ceilingusing by sand papering or by any other mean and after preparing the surfaces applying three coats of white wash complete all as specified & directed by Engineer-in- charge. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and as directed by Engineer-in- charge. |
| 10 | Material and labour for vitrified ceramic coloured tiles (light shade) 10 mm thick square or rectangular area of each tile not exceeding 0.36 sqm, as in floor, set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile includingnecessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 11 | Material and labour for vitrified ceramic coloured tiles (light shade) 10mm thick square or rectangulararea of each tile not exceeding 0.36 sqm, as in skirting, dado etc. set and jointed in neat cement slurry@ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile includingnecessary cutting as per site requirement, tiles laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 12 | Material and labour for Glazed ceramic coloured tiles of size 300mmx 200mm / 450mmX 300mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurry@ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thickrenderingin cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. |
| 13 | Material and labour for Non Skid ceramic coloured tiles7 to 8 mm thick square or rectangular area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floor, set and jointed in neat cement slurry@ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile includingnecessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 14 | Material and labour for Non Skid ceramic coloured tiles7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor, set and jointed in neat cement slurry@ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile includingnecessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 15 | Taking up or down existing galvanised steel water tubing (GI pipe) 15mm bore including fitting/connection from wall/ceiling/floor/concealed etc. complete all as specified anddirected by Engineer-in-charge. |
| 16 | Supply and fixing of CPVC pipes outer dia 20mm SDR 11 & Plain CPVC SDR 11 fittings fixed complete to walls, ceiling and laid in floor or concealed in walls including cutting chases in wall (as directed ) and making good disturbed surfaces of walls including cutting and threading of pipe complete all as specified and as directed by Engineer-in- charge. |
| 17 | Supply and Fixing in repairs vitreous china squatting pan, "Orissa" pattern, size 580mm x 440mm x 260 mm, white, with integral foot rests with "P" or "S" trap including provision of cement concrete bedding ( excluding flushing cistern and flush pipe) including making connections and demolition of concrete/ lime concrete bedding for taking out existing broken squar pan complete all as specified and as directed by Engineer-in- charge. |
| 18 | Supply and Fixing in repairs vitreous china wash down water closet pan (EWC) (pedestal pattern) white and trap including connection to drain (or outgoing pipe) and to flushing pipe of polyethylene of low or high density, antisyphonage pipe including white coloured closed pattern plastic seat cover and fixing bolt and flush pipe of polyethlene of low or high density 32mm dia (excluding flushing cistern ) anti syphonage pipe etc and connection to drain for outgoing pipe and to flushing pipe anti-syphonage pipe etc complete all as specified and as directed by Engineer-in- charge. |
| 19 | Supply and Fixing in repairs vitreous china wash basin, white, with pedestal, size 550mm x 400mm excluding taps, waste, chain and plug and porcelain stopper including brackets (flat back or angle backe type) any size, including cutting for and pinning in ends of brackets or errecting stand, 32 mm dia waste pipe coupling & PVC waste pipe of 32mm dia etccomplete all as specifiedand as directed by Engineer-in- charge. |
| 20 | Supply and fixing in repair vitreous china bowl type Urinal, flat back typeof size 465 mm x 355mm x 265mm, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and pointing around urinal back in cement, grating and union for discharge etc. completeincluding providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed by Engineer-in-charge. |
| 21 | Supply and Fixing in repairs PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVCcomplete all as specifiedand as directed by Engineer-in- charge. |
| 22 | Supply and fixing in replacement bib tap cast copper alloy, chromium plated with crutch or butterfly handle with capstan head, wall flange, screwed down, screwed for iron pipe or for brass ferrule15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS. |
| 23 | Supply and fixing in replacement stop valve/angle valve cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed both end for iron pipe or for brass ferrule15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS. |
| 24 | Supply and fixing in replacement stop valves 15mm , cast copper alloy , fancy type chromium palted screwed down , high pressure , with crutch or butterfly handle , screwedboth ends for iron pipe or for unions and fixed complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS. |
| 25 | Supply and fixed in repair pillar tap cast copper alloy with capstan head, chromium plated,fancy type, high pressure with or without letter"Hot" or "Cold" with long shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge. Note :-The minimum weight of tap shall be as given in SSR or in relevant IS |
| 26 | Supply and fixing100mm dia grating doom of PTMT having minimum weight 25gm complete all as specified and as directed by Engineer-in-charge. |
| 27 | Supply and fixing in replacement brass chromium plated shower rose 125 mm size, with swivel joints, including fixing to steel pipe or union, complete all as specified and as directed by Engineer-in-charge. |
| 28 | Supply & fixingin replacementstainless steel sink without drainageboard made out of 1.00mm thick sheet , kitchen or laboratory withplugs, washers, waste pipe includingbedding in cement mortar to dwarf wall or fixing cast iron cantilever brackets and connecting union to waste pipe, overall size 495x420mm with bowl size 410x330x160mm including taking down existing chinaware sink complete all as specified and directed by Engineer-in-Charge. |
| 29 | Supply & fixingin replacementstainless steel sink with drainageboard made out of 1.00mm thick sheet , kitchen or laboratory withplugs, washers, waste pipe includingbedding in cement mortar to dwarf wall or fixing cast iron cantilever brackets and connecting union to waste pipe, overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm including taking down existing chinaware sink complete all as specified and directed by Engineer-in-Charge. |
| 30 | Supply & fixing in repair CP waste fittings brass chromium plated for sink/WHB 40mm/32mm dia with long screws sinks and fly nuts , flenge endbedded in red led cement and other in fixed complete all as specified and as directed by Engineer-in-charge. |
| 31 | Supply & fixing in repair for waste pipe connected to union, coupling with urinal, sink & WHB complete all as specified and as directed by Engineer-in-charge. |
| 32 | Supply and fixing in replacement 600mm x 450mm size bevelled edge mirror selected quality 5mm thick glass mounted on 6mm thick commercial ply and fixed to wooden plugs with chromium plated brass screws and cup washers, including aluminium frame / beading alround made of aluminium channel, complete all as specified and directed by Engineer-in-Charge. |
| 33 | Supply and fixing in repair tubular towel rail brass chromium plated 20 mm dia ‘D’ type 60 cm long including end brackets complete all as specified and as directed by Engineer-in-charge. |
| 34 | Supply & fixing in repair chromium plated glass corner (Corse) size 300mmx300mm complete all as specified and directed. As per Cat No FS005103OTTAof Make Ceraorequivalent Make as approved by GE from Appendix "C". |
| 35 | Supply & fixing in repair CP Grating, square/ rounded, 100mm size of(minimum weight 100gms) complete all as specified and directed. |
| 36 | Supply & fixing in repair 600 mm long PVC connection 15mm size with PTMT nuts complete all as specified & directed by Engineer-in-charge. |
| 37 | Supply and fixing in repair single lever wash basin Brass CP mixer for mixing hot & cold water screwed down for 15mm bore pipe and fixed complete all as specified and as directed by Engineer-in-charge. ( Make : Jaquar / ESSESS/ PLUMBER) |
| 38 | Supply & fixing in repair fancy type wall mixture of brass, chromium plated, 3 in 1 system with hot and cold arrangement, with provision for both hand shower & overhead showerwith & including handshower ( health faucet) ABS body including 8 mm dia flexible tube 1 mtr long & wall hook complete all as specified.( Make : Jaquar cat ref CON-281 KN & ALD-CHR-593 or equivelent) |
| 39 | Supply and fixing in repair Jet spray, CP,brass body with wall hook and 1 mtr SS pipe complete all as specified and as directed by Engineer-in-charge. |
| 40 | Supply & fixing in repair hand shower (health faucet) ABS body including 1 meter long 8mm dia flexible tube and including wall hook including taking down old any type shower complete all as specified and as directed by Engineer-in-charge. As per Cat No ALD-CHR-583 of Make Jaquar orequivalent. |
| 41 | S&F, in repair, chromium plated, Toilet paper holder complete all as specified and directed. As per Cat No ACN -1153N of Make : Jaquar or equivalent as approved by GE from the makes mentioned in Appx "A". |
| 42 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed by Engineer-in- charge. |
| 43 | Supply and Fixing PVC SWR Pipe (ISI Marked) 75mm bore dia, single socketed, in any length with rubber ring joints, fixed to walls including necessary clamp complete all as specified and as directed by Engineer-in- charge. |
| 44 | Supply and Fixing PVC SWR Pipe (ISI Marked) 110mm bore dia, single socketed, in any length with rubber ring joints, fixed to walls including necessary clamp complete all as specified and as directed by Engineer-in- charge. |
| 45 | Supply and Fixing PVC SWR Pipe Bend(ISI Marked) 75mm bore dia complete all as specified and as directed by Engineer-in- charge. |
| 46 | Supply and Fixing PVC SWR Pipe Bend(ISI Marked) 110mm bore dia complete all as specified and as directed by Engineer-in- charge. |
| 47 | Supply and fixing in repair 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cementcomplete all as specified and as directed by Engineer-in-charge. |
| 48 | Supply and fixing in repair brass CP bottle trap ( with internal partition) 32mm bore with 250mm and 190mm long wall connection pipe complete all as specified and directed as per Cat No ALD-769L250x190 of Make : Jaquar or equivalent |
| 49 | Supply and fixing in repair chromium plated glass shelf of size 22" complete all as specified and directed as per Cat No AQN-7771 of Make Jaquar orequivalent. |
| 50 | Supply and fixing in repair PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size as perCat No. 554 ofMake Prayag orequivalent |
| 51 | Supply and fixing in repair chromium plated, Soap dish holder complete all as specified and directed as per Cat No ACN -1131N of Make : Jaquar or equivalent. |
| 52 | Supply and fixing in repair Plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engineer-Charge. |
| 53 | Dismantling PVCwater storage tank of capacity exc 500 litres and n exc 1000 litres complete all as specified and as directed by Engineer-in- charge. |
| 54 | Dismantling PVCwater storage tank of capacity exc 250 litres and n exc 500 litres complete all as specified and as directed by Engineer-in- charge. |
| 55 | Supply and Fixing 500 litres capacity Rotational moulded polyethylene in white colour, three layered, water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position Ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 20mm-210 gram) complete all as specified and as directed by Engineer-in- charge. |
| 56 | Supply and Fixing 1000 litres capacity Rotational moulded polyethylene in white colour, three layered, water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position Ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 20mm-210 gram) complete all as specified and as directed by Engineer-in- charge. |
| 57 | Supply and Fixingin repair 20 mm bore Gun metal globe or Gate valve with iron wheel head , screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer-in- charge. |
| 58 | Material and labour for complete removal of existing treatment (any layers of existing treatment ) and efflorescence from old decorated surface of walls/pillars/cornices by scraping down with using mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-charge, brooming down and preparing the surfaces smooth and make goodby applying average 3mm thick layer (1.5mm thick each in two layer application ) of white cement based wall care putty as approved by Engineer-in-charge) and sanding the surface by using mechanical sander machine to make the even and smooth upto entire satisfaction of Engineer-in-charge and after that applying two coats ofoil emulsion distemper (washable), as approved tint/colour by using paint roller brush complete all as specified and as directed by Engineer-in-Charge. |
| 59 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames, wooden /PVC door s/steel ventilator) areanot exceeding 1.50 sqm each complete all as specified and asdirected by Engineer-in- charge. |
| 60 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) areaexceeding 1.50 sqm but not exceeding 4 Sqm eachcomplete all as specified and asdirected by Engineer-in- charge. |
| 61 | Taking down wooden shutters only of any description area not exceeding 1.0 sqm eachcomplete all as specified and as directed by Engineer-in- charge. |
| 62 | Taking down wooden shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm eachcomplete all as specified and as directed by Engineer-in- charge. |
| 63 | Taking down wooden shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm eachand refixing in same opening after necessary easing, adjustments, minor repairs, oiling, adjustment with cutting or fixing plain fillets/planks made from second class hard wood etc to remove gap between floor and shutter complete all as specified and as directed by Engineer-in- charge. |
| 64 | Supply and fixingPressed steel frames with thickness of steel sheet 1.25mm for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 105mm x 60mmincludingone shop coat of priming complete all as specified and as directed by Engineer-in-charge.Note:- The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account. |
| 65 | Supply and fixingPressed steel frames with thickness of steel sheet 1.25mm for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125mm x 60mmincludingone shop coat of priming complete all as specified and as directed by Engineer-in-charge.Note:- The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account. supply only. |
| 66 | Material and Labour for PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregate as in back filling of pressed steel chowkhats single or double rebated or for fixing hold fasts etc complete all as specified and as directed by Engineer-in-charge. |
| 67 | Supply & fixing factory made plain framed panelled shutters (two panels as approved), 35mm thick of 2nd class hard woodwith lock rail and panel inserts of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401, including 2nd class soft wood kail beading 20mm wide tapering from 10mm to 5mm on one side and also fitted to chowkhatcomplete all as specified and as directed by Engineer-in- charge. Note : -(i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item (painting) of BOQ. |
| 68 | Supply and Fixing 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), using 2nd class hard wood (Bonsum/ Hollock) edges of frming plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc , sizes of members of shutters as specified in SSR Part-I, Section8, Clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge.Note:- Wire gauze/ glass to be measured and paid separately. |
| 69 | Supply and Fixing Stainless steelwire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18mm and fixed with tinned tacked or galvanized steel wire staples complete all as specified and as directed by Engineer-in- charge. |
| 70 | Supply and fixing mild steel barrel tower bolts, 200 mm long, stove enamelled black with bright bolts and fixed complete all as specified and as directed by Engineer-in-charge. |
| 71 | Supply and fixing mild steel sliding door bolts with hasp and staple, length of bolt 300mm, plate type, stove enameled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on staple plate and fixed, complete all as specified and as directed by Engineer-in-charge. |
| 72 | Supply and fixing in repair mild steel ordinary rat rail rod pattern springs of 300mm length incl roller & rooler plate Fixed to wooden / Metal frames complete as in repairs all as directed by Engineer-in-Charge. |
| 73 | Supply and fixing in repair mild steel ordinary rat rail rod pattern springs of 300mm length incl roller & rooler plate complete as in repairs all as directed by Engineer-in-Charge. |
| 74 | Supply & fixing 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and directed by Engineer-in-Charge. |
| 75 | Supply and fixing mild steel pressed handles, 150 mm long, oval type, stove enamelled black complete all as specified and as directed by Engineer-in-charge. |
| 76 | Supply and fixingSolid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, fixed in opening using MS screw 75mm long with PVC fastener including making good disturbed wall surfaces (brick, plastering, tiles and painting work as per existing) complete all as specified and as directed by Engineer-in-Charge. |
| 77 | Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed by Engineer-in-Charge. |
| 78 | Supply and fixing aluminium anodised barrel tower bolt of extruded section, 150mm longcomplete all as specified & directed by Engineer-in-charge. |
| 79 | Supply only 100 mm long Butt hinges, heavy weight, cold rolled mild steel, and fixedcomplete all as specified and as directed by Engineer-in- charge. |
| 80 | Supply & fixing 125mm long, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in- charge. |
| 81 | Supply & fixing, factory made steel window confirming to IS 1038 with side hung shutters including projecting type hinges, with steel handle, steel peg stay, complete, dovetailed welded, with one shop coat of zinc chromate primer with glazing bars including fixing of lugs in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast and making good disturbed area of walls and cills to match the existing surfces by bricks / plastering works and painting work etc complete all as specified & as directed by Engineer-in- charge. |
| 82 | Supply & fixing, factory made steel window confirming to IS 1038 with side hung shutters including projecting type hinges, with steel handle, steel peg stay, complete, dovetailed welded, with one shop coat of zinc chromate primer without glazing bars including fixing of lugs in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast and making good disturbed area of walls and cills to match the existing surfces by bricks/ plastering works and painting work etccomplete all as specified & as directed by Engineer-in- charge. |
| 83 | Supply & fixing, factory made steel ventilators all as per IS 1038/83, with top hung shutters including hinges, suitable steel handle, steel peg stay,with one shop coat of zinc chromate primer fixing lugs in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast and making good disturbed area of walls and cills to match the existing surfces by bricks/plastering works and painting work etc complete all as specified & as directed by Engineer-in- charge. |
| 84 | Material and Labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by Engineer-in-charge. |
| 85 | Material and labour for preparation ofnew wooden or wood based surfacesof any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed by Engineer-in- charge. |
| 86 | Dismantling wall and ceiling board (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets fixed in any position with nails fixed with screws complete all as specified and as directed by Engineer-in-charge. |
| 87 | Supply and fixing for Poly coated GI frame work as in grid for False ceiling comprising of protected GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleves and screws at 450mm centre to centre/intermediate chaqnnel 0.9mm thick having to equal flanges of 15mm each and web of 45 mm suspended from soffit and approx 900mm centre to centre with GI cleat and steel expansion fasterners with and including ceiling section(not exc 1.2 metre length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips acorss the intermediate channel at 457mm centre to centre and hangers 6mm dia GI (upto 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x3mm size 60mm long complete with and including 7mm thick PVC laminated gypsum tiles of size 595x595mm of approved design of make Acoster/Ploca/Armstrong or equivalent as approved by GE all as specified & directed |
| 88 | Material and labour for Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed by Engineer-in-charge. |
| 89 | Material and labour for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed by Engineer-in-charge. |
| 90 | Demolition Brickwork of stone/boulder masonry, build in cement mortar or cementlime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete al as specified and directed by Engineer-in-Charge. |
| 91 | Material and Labour Brick work with sub class ‘B’ burnt claybricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in- charge. |
| 92 | Material and labour for 75mm thickcement concrete ( 1:4:8),type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed by Engineer-in-charge. |
| 93 | Material and Labour machine pressed precast concrete coloured interlocking paver block any shape, size and pattern, IS - 15658-2006 (Marked) of 60 mm thickness of M-35 gradewith grey cement & pigment complete all as specified and as directed by Engineer-in-charge. |
| 94 | Material and Labour for sand filling under interlocking tiles including watering and consolidation complete all as specified and as directed by Engineer-in-charge. |
| 95 | Material and labour for Cement concrete 1:3:6,type C-1 using 20 mm graded stone aggregate as in coping , packing around interlocking paver block complete all as specified and as directed by Engineer-in-charge. |
| 96 | Dismantling of stone slab and tiles of any description or thickness in floor, aprons, kerbs, vertical surface etc laid dry complete all as specified and as directed by Engineer-in-charge. |
| 97 | Dismantling timber scantlings 40 sq. cm and over in section, in any position (unframed work) complete all as specified & directed by Engineer-in- charge. |
| 98 | Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge. |
| 99 | Supply and fixing Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick, any colour having tensile strength of 550 Mpa as in ridge (including cutting and bent to shape), roof covering, fixed with self tapping screwscomplete all as specified and as directed by Engineer-in-charge. |
| 100 | Dismantling plain or corrugated asbestos cement sheet (corrugated / semi corrugated) including ridges as in roof covering complete all as specified & directed by Engineer-in- charge. |
| 101 | Material and labour for mild steel work tubular poles/post including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to latest relevant IS grade St-240 complete all as specified & directed by Engineer-in- charge. |
| 102 | Material and Labour for repairing of Steel rolling shutters, with/ without ball bearing, as specified including top cover, anchoring rod, hasp and staple, greasing, repair of spring or slidings rails and one coat of Synthetic enamel paint, erected in position as indicated, completegear operaed/chain oprated or Manualtype in any size complete all as specified and direct by Engineer-in-Charge. |
| 103 | Material and Labour for 20-25 mmthick Kota stone slab as approved by GEflooring, mirror polished laid over 15 mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry @ 3 Kg/ Sqm mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed by Engineer-in- charge. |
| 104 | Material and Labour for machine cut kota stone slab as approved by GE as in vertical surfaces, 20-25 mm thick laid overand including 10 mm thick rendering inCM 1:4 laid and jointed with grey cement slurry @ 3 Kg/ Sqm mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed by Engineer-in- charge. |
| 105 | Supply and fixing Renewing tiles in patches, area nexc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed by Engineer-in-Charge. |
| 106 | Supply and fixing in repair Prelaminatd particle board 19/20 mm thick, interior grade,ISI marked as in cupboard shutter/shelves,prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed by Engineer-in-Charge. |
| 107 | Supply and fixing in repair 40mm Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed by Engineer-in-Charge. |
| 108 | Supply and fixing in repair Aluminium, anodised, barrel tower bolts of extruded section 200mm long complete all as specified and directed by Engineer-in-Charge. |
| 109 | Supply and fixing in repair mild steel Butt hinges 100 mm size,cold rolled medium weight and fixed complete all as specified and directed by Engineer-in-Charge. |
| 110 | Supply and fixing in repair mild steel Butt hinges 125 mm size,cold rolled medium weight and fixed complete all as specified and directed by Engineer-in-Charge. |
| 111 | Supply and fixing in repair MS helical door spring 200 mm size complete all as specified and directed by Engineer-in-Charge. |
| 112 | Supply and fixing in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks or galvanized wire staplesin door and steel window complete all as specified and directed by Engineer-in-Charge. |
| 113 | Supply and fixing in repair Door closer hydraulically regulated,Aluminium body universal type, suitable for door shutters of 851 to 1000 mm in width and complete all as spd & directed. |
| 114 | Supply and fixing in repair floor spring door closer heavy dutywith cast iron body,brass pivet and stainless steel cover plate for aluminium doors,ISI marked,including taking down shutters ,refixing the same and making good the floor to match with the exiting complete all as specified and directed by Engineer-in-Charge. Make:godrej,Everest,Universal or Equivelent . |
| 115 | Material & Labour for granite (of any type), 16mm to 18mm work (table rubbedand polished) in steps, jamps, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge. |
| 116 | Material & Labour moulding to granite stone 16 to 18 mm round complete including polishing complete all as specified and directed by Engineer-in-Charge. |
| 117 | Supply and fixing in repair for 4mm thick sheet glass ordinary qualityand glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed. |
| 118 | Supply and fixing figured glass,pinhead type for 4mm thickand glazing with oil putty/wooden beads in squares not exc. 0.5 Sqm in each pane complete all specified and as directed. |
| 119 | Supply and fixing 4 mm thick sheet glass ordinary quality andglazing with oil putty in suare not exceeding 0.5 sqm in each pane all as specified. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
