Road Transport and Highways Government Departments Closing in 0 days TDR #41960865

Tender For Construction I/C Mbt Of A Road From Photjaud (Mawrap) To Mawkhyrwang (19.30 Km) (Mg07/02/11) Stage I And Ii (Balance Work)

Issued by Government Departments · East Khasi Hills, Meghalaya
Tender Value
17.80 Crore
Estimated cost
Bid Submission
07 Feb 2024
0 days left
EMD
35.61 Lakhs
Bank guarantee accepted
Document Fee
18000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction I/C Mbt Of A Road From Photjaud (Mawrap) To Mawkhyrwang (19.30 Km) (Mg07/02/11) Stage I And Ii (Balance Work) Construction I/C Mbt

BOQ

Name of Work: Construction i/c Metalling and Blacktopping of a road from Photjaud(Mawrap) to Mawkhyrwang (L=19.30Km) Stage-I&II (Balance Work)
Sl. No. Item Description
1SITE CLEARANCE
2Clearing and Grubbing road land by mechanical means including uprooting rank vegetation, grass, bushes, shrubs saplings and trees of girth upto 300 mm, removal of stumps and stumps of trees cut earlier and disposal of unserviceable materials and staking of serviceable material with all lead up to 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness as per Technical Specification Clause 201.
3EARTHWORK
4Excavation in soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification Clause 1603.1
5Excavation in hilly area in ordinary rock not requiring blasting by mechanical means including cutting and trimming of slopes and disposal of cut material with a lift upto 1.5 m and lead upto 20 m as per Clause 1603.2.
6Excavation in hilly areas in hard rock requiring blasting, by mechanical means, lift upto 1.5 m and disposal of excavated rock upto a lead of 20 m as per Clause 1603.2.
7Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.
8Removal of unsuitable soil including (Cleaning and grubbing road land etc.) excavation, loading and disposal upto 1000 m lead but excluding compactionground supporting embankment subgrade replacement by suitable soil, which shall be paid separately as per Clause 303.5.2 as per Technical Specification Clause 302.3.11
9BASE AND SUB-BASE
10GSBGrade 2- Construction of granular sub-base with locally available graded material, spreading in uniform layers with motor grader on prepared surface, watering to OMC and compacting with smoothwheelroller to achieve thedesired density, complete as per Technical Specification/ direction of EE.
11WBM Grade 3- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.
12BITUMINOUS WORK
13Prime Coat- Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.6-0.9 kg/sqm using mechanical means as per Technical Specification
14Tack Coat- Providing and applying tack coat with Bitumen emulsion (RS-1)using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
15OGPC- Providing, laying and rolling of 20 mm thick Open Graded Premix Carpet using Bitumen Emulsion (cold mix) as per Technical Specification Clause 508.2 composed of 13.2 mm to 5.6 mm aggregates to required line, grade and level to serve as wearing course on a previously prepared base, including mixing, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.
16Seal Coat- Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall usingType Bas per Technical Specification Clause 510
17CROSS DRAINAGE WORKS: 1X1.00 M Dia. Pipe Culverts
18Earthwork in excavation for foundation of structures in ordinary rock upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.
19Providing Concrete (M-10) for Plain Concrete in open foundations complete as per drawing and Technical specification clause 802, 803, 1202,& 1203
20Stone masonry work in cement mortar in foundation completeetc.(III). Random Rubble Masonry. (ii) In 1:4 Cement Mortar.
21Providing and laying reinforced cement concrete pipe NP3 (1000mm dia.) for culverts on first class bedding of granularmaterial in single row includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106.
22Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specifications
23Providing concrete cradle (M-15) for plain concrete in open foundations……complete, etc
24Laying GSB materials belows pipe-etc
25Backfilling in foundation trenches as per drawing and technical specification Clause 1108
26CROSS DRAINAGE WORKS: CONCRETE BRIDGE (4 m span)=4 NOS
27Earthwork in excavation for foundation of structures in ordinary rock upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.IN ORDINARY ROCK
28Back filling behind abutment, wing wall and return walletc
29Providing Concrete (M-10) for Plain Concrete in open foundations complete as per drawing and Technical specification clause 802, 803, 1202,& 1203
30Providing concrete for plain / reinforced concrete (PCC-M15) in open foundation complete as per drawing and technical specifications Clauses 802, 803, 1202 & 1203.
31Providing concrete for plain / reinforced concrete (PCC-M15) in substructure complete as per drawing and technical specifications Clauses 802, 804, 805, 806, 807, 1202 & 1204.
32Providing Concrete (M-25) for Plain/Reinforced Concrete in Superstructure complete for height upto 5 m as per drawing and Technical specification clause 802, 804, 805, 1202,& 1204 of specifiaction of Rural Roads including curing complete
33Supplying, Fitting and Placing HYSD Bar Reinforcement in Superstructure including cost of Steel Material and carriage etc. complete as per Drawing and Technical Specification Clause 1002, 1005, 1010, and 1202 of Specification of Rural Roads
34Providing Weep Holes in Brick masonry/ Stone masonry, Plain/ Reinforced concrete abument, wing wall, return wall with 100mm dia AC pipe extending through the full width of the structures with slope of 1(V): 20 (H) towards drawing face complete as per drawing
35Protection: Retaining Wall (H-4.00m)
36Earthwork in excavation for foundation of structures in ordinary rock upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.
37RR Stone Masonry Work in cement mortar (1:4) in substructure of Head walls complete as per drawing and technical specification Clasue 1109
38Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, retaing wall, breast wall etc.
39PROTECTION: BreastWall(Ht-4m)
40Earthwork in excavation for foundation of structures in ordinary rock upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.
41RR Stone Masonry Work in cement mortar (1:4) in substructure of Head walls complete as per drawing and technical specification Clasue 1109
42Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, retaing wall, breast wall etc.
43DRAINAGE WORKS : UNLINED DRAIN=16311m
44Construction ofunlined surface drain of average cross-sectional area 0.4 sqm in ordinary rock to specified lines, grades, levels and dimensions as per approved design and Technical Specification Clause 307.Excavated material to be used in embankment at site.
45ROAD FURNITURE WORKS
46Logo Board of PMGSY Project (Every 2 Km interval)(As per fig.5 of Road signage under PMGSY published by the NRRDA on Dec\"06)
47Construction of 5th Kilometre Stone (Precast) :Reinforced cement concrete M 15 grade 5th Kilometre stone with local stone of standard design as per IRC : 8 fixingin position including painting and printing etc. as per drawing and technical specification
48Construction of Ordinary Kilometre Stone (Precast) :Reinforced cement concrete M 15 grade ordinaryKilometre stone with local stone of standard design as per IRC : 8 fixingin inposition including painting and printing etc. as per drawing and technical specifacation
49Construction of 200 Metre Stone (Precast) : Reinforced cement concrete M 15 grade 200 metre stone with local stone of standard design as per IRC : 8 fixingin inposition including painting and printing etc. as per drawing and technical specification
50Boundary Pilar : Reinforced cement concrete M 15 grade Boundary pillars /local stone of standard design as per IRC : 25 fixed in position including finishing and lettering but excluding painting as per drawing and technical specification clause 1704
51ROAD SAFETY AND TRAFFIC SIGN WORKS
52Semi Reflective Traffic Signs: Providing and fixing of Semi Reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5mm thick MS Sheet duly stove white colour in front and grey colour in black with red reflective border of 65mm600 mm Equilaterial Triangle
53Semi Reflective Traffic Signs: Providing and fixing of Semi Reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5mm thick MS Sheet duly stove white colour in front and grey colour in black with red reflective border of 65mm600 mm Circular
54Semi Reflective Traffic Signs: Providing and fixing of Semi Reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5mm thick MS Sheet duly stove white colour in front and grey colour in black with red reflective border of 65mm600 mm Square
55Semi Reflective Direction & Place Identification Sign: Providing and erecting direction and place identification of semi reflective sign board as per IRC: 67 made of 2mmThick M.S sheet duly stove enameled Paint white colour in front and grey colour in back.(Ref. Annexure 18.1)
56INTERSECTION IMPROVEMENT = 6 nos.
57Construction of granular sub-base by providing well graded Material grading 2,spreading in uniform layersas per Technical Specification clause 401&Table No. 401 of Specification of Rural Roads
58Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification, WBM grading II as per Technical Specification clause 405 of Specification of Rural Roads including lighting, guarding, barricading etc.
59Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification, WBM grading III as per Technical Specification clause 405 of Specification of Rural Roads including lighting, guarding, barricading etc.
60Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular Base and Bituminous including clearingas per technical specification Clause 502 of specification of rural roadsincluding lighting, guarding, barricading etc.
61Providing and applying tack coat with Bitumen emulsion (RS-1)using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
62Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.
63Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall usingType Bas per Technical Specification Clause 510
64Five Years Maintenance
65Ist Year
66IInd Year
67IIIrd Year
68IVth Year
69Vth Year

AI Tender Summary

OUR REF NO 41960865
AUTHORITY Government Departments
TENDER VALUE 17.80 Crore
LAST DATE 07-02-2024
Authority
Authority Name State Rural Roads Development
Work Description Construction I/C Mbt Of A Road From Photjaud (Mawrap) To Mawkhyrwang (19.30 Km) (Mg07/02/11) Stage I And Ii (Balance Work) Construction I/C Mbt
Basic Detail
Tender No 2017-18(I)-MG07/02/11
Bidding Type Tender
Location
City East Khasi Hills
State Meghalaya
Key Dates
Publish Date 01 Feb 2024
Submission Date 07 Feb 2024
Open Date 08 Feb 2024
Finance
Tender Value 17.80 Crore
Tender Fee 18000
EMD 35.61 Lakhs
Exemption Not Available
Document List
d5f8e546-c7c7-4b54-828e-a0063e11a930.html
BOQ_207168.xls
SBDMG070211.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 01, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 07, 2024
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Feb 08, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

d5f8e546-c7c7-4b54-828e-a0063e11a930.html

xls

BOQ_207168.xls

pdf

SBDMG070211.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders