Lowering Of Submersible Pumping Machineries In Newly Sunk Rbtw Under Panuria Water Supply Scheme.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Feb 2024
0 days left
EMD
14000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
panuria → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Lowering Of Submersible Pumping Machineries In Newly Sunk Rbtw Under Panuria Water Supply Scheme.
BOQ
| Sl. No. | Item Description |
| 1 | Supply delivery of the following materials at site :- |
| 2 | Vertical submersible pumping machinery conforming to IS 8034 directly coupled with wet winding type suitable size submersible motor conforming to IS 9283 with standard MOC for portable clear water and BEE 3star rated ,continuous duty(s1) with following specification:Discharge-54 m³/Hrat a head of 59 mtrs.Motor submersible type 3 Phase 50 Hz,±6%, 415Volt +/- 10%, 2900 RPM.17.5HP ( H/Q Characteristic Curve of pump set & Test Certificate including G.C. of the P/M set should be submitted before delivery.)(Make - Approved Make) |
| 3 | 16 mm x 3 core Aluminum Armored, XLPE Insulated 1.1 K.V. grade cable, conforming to Is 7098(1) as per direction of EIC (Make:approved in vendor list.) (Test Certificate is to be submitted at the time of deliver] (840 Mtr. for each T/W X 2 Nos RBTW) |
| 4 | Supply delivery at site 6 mm2 x 3 core 1.1 KV Grade flat submersible copper conductor cable. (Make:make [Test certificate to be produced at the time of delivery) |
| 5 | 80 mm dia. ERW M.S. column pipe having thickness 4.85 mm, (as per 15 1239 Part- Heavy Type) having 11 TPI thread at both end with one heavy type socket and painted by 2 coats of anticorrosive synthetic paint. (Each pipe 1.5 mtr long)(Make: approved) |
| 6 | Gi Wire for Cable binding. |
| 7 | Sand cutting and removing from the river bed Ajoy for withdrawing and laying of cable line up to the depth of 1.5m from the river level as per direction. (For Two Nos of RBTW) |
| 8 | Earth work in excavation of Cable line trenches, in all sorts of soil including removing, spreading or stacking the spoils within a lead of 75 m. as directed &filling the same with excaveted soil including ramming dressing after all complete. The item includes necessary trimming the sides of trenches, levelling dressing and ramming the bottom, bailing out water as required complete. (For Two Nos of RBTW))a) Depth of excavation not exceeding 1,500 mm. |
| 9 | Making straight through joint between 1.5 mm2 or 2.5 mm2(motor cabic) and 3 Core X 6 mm2 submersible copper cable for extension of motor cable up to required lengh by supplying necessary seal kit to make joints leak proof all complete as per direction. (One for Star Other for Delta) |
| 10 | Laying of 16 mm2 x 3 core Al. Ar. Cable along the length of G.I. collecting line including fixing with damaged cale armoured, at a suitable interval so as to prevent sagging of cable complete as per direction of EIC |
| 11 | Laying of one 3 Core X 16 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand. |
| 12 | Installation of submersible pumping machinery along with 80 mm dia, M.S. column pipe part by part in the newly sunk tube wells with an arrangement of derrick, lifting tackles, tools and plants etc. on hire basis and binding the vertical submersible cable with the column pipes properly and fixing M.S. Top Cover on the tube wells with supplying necessary Clamps, nuts, bolts, washers etc. all complete as per direction. |
| 13 | Making straight through joint of 3 core 16 mm2 submersible cable by supplying necessary seal kit and hardener to make joints leak proof all complete as per direction. |
| 14 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.A) 3 core 16 sqmm cable |
| 15 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)(a) With earth obtained from excavation of foundation |
| 16 | Filling the trenches with excavated sand by engaging manual labour as per direction. |
| 17 | Supply and fitting fixing of 20 HP Star-delta Starter,415 Volt Coil Voltage, 50 Hz. Relay range-20-32 Amp, 3 Phase at the wall of Pump House with suitable iron angle frame work should be done by skilled electrician. (MAKE-Approved Make) |
| 18 | Atfirst cutting the foot walk concrete road approx length 4 mtr. X 1 mtr. Width x 1 mtr. Depth then carrying 2 Nos 200 mm dia old rusted CI pipe from site store and placed properly in this trench to cross over the above said road then casted with plain cement concrete in this blank whole work should be done as per direction of EIC. |
| 19 | Uproating and cutting bushes and jungle top and side of the tube-well line and cleaning also of the deposited garbage from the collecting line for laying of cable. |
| 20 | Add. GST@18% |
| 21 | Add. Cess@1% |
AI Tender Summary
Tender Timeline
Feb 01, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 20, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 22, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender