}

Tender For Construction Of Cultural Shed At Sitaldas Colony, Ward No. 33, Raniganj., asansol-West Bengal

Asansol Durgapur Development Authority -ADDA has published Tender For Construction Of Cultural Shed At Sitaldas Colony, Ward No. 33, Raniganj.. Submission Date for this Tender is 15-02-2024. Shed Construction Tenders in asansol West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

41951201
Tender For Construction Of Cultural Shed At Sitaldas Colony, Ward No. 33, Raniganj.
Open Tender
Indian
West Bengal
asansol
15-02-2024

Tender Details

Construction Of Cultural Shed At Sitaldas Colony, Ward No. 33, Raniganj.

Key Value

Document Fees
Refer document
EMD
INR 31291.0 /-
Tender Value
INR 15.64 Lakhs /-

BOQ Items

Name of Work: Construction of cultural shed at Sitaldas Colony, Ward No. 33, Raniganj.
Sl. No. Item Description
1Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. upto 150 mm. Thick.
2Earth work in excavation of foundation trenches or drains, in all shorts of soil (including mixed soil but excludinglaterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 meter as directed.The item includes necessary trimming the sides of trenches, levelling,dressing and ramming the bottom, bailingout water as required complete.Depth of excavation not exceeding 1.50 M .
3Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water,ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
4Supplying and laying polythene sheet (150gm/sqm) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
5Hire and labor charges for shuttering with centering and necessary staging upto 4musing approved stout props and thick hard wood planks of approved thickness with required bracing for concreteslabs, beams and columns , lintelscurved or straight including fitting, fixing and striking out after completionof works (upto roof of ground floor)25mm to 30mm thick wooden shuttering without staging in foundation. For the work in foundation (PCC side and column raft sides)
6Ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering & reinforcement, if any, in ground floor as per relevant IS codes.Pakur variety.
7Hire and labor charges for shuttering with centering and necessary staging upto 4musing approved stout props and thick hard wood planks of approved thickness with required bracing for concreteslabs, beams and columns , lintelscurved or straight including fitting, fixing and striking out after completionof works (upto roof of ground floor) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work.Ground floor
8Reinforcement for reinforced concrete work in all sorts of structuresincluding distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary) cuttings to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every intersection,complete as per drawing and direction.Tor steel/Mild steel,For the work in foundation, basement and up to roof of ground floor/4.00 m. Tor steel/Mild Steel. SAIL/ TATA/ RINL.
9Ordinary cement concrete ( mix 1:1.5:3) with graded stone chips ( 20 mm nominal size) excluding shuttering & reinforcement if any.Pakur Variety Ground floor.
1025 mm. thick damp proof with cement concrete (1:1.5:3) (with graded stone aggregate 10 mm. normal size) and painting the top surface with a coat of bitumen [VG.40 ] using 1.7 kg. per sq.m. including heating the bitumen and cost and carriage of all materials complete. [Bitument to be supplied by the Agency].
11Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layercomplete. (Payment to be made on the basis of measurement of finished quantity of work). Withearth obtained from excavation foundation.
12Removal of rubbish , earth etc from the working site and disposal of the same beyond the compound in conformitywith the municipal corporation rules for such disposal loading into truck and cleaning the site in all respect as per direction of E.I.C
13Brick work with 1st class bricks in cement mortar (1:4)(b) In superstructure, ground floor
14125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor
15Plaster (to wall,floor,ceiling, etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (excluding cost of cheaping over concrete surface where necessary)15 mm thick(1:6) plaster .
16Plaster (to wall,floor,ceiling, etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (excluding cost of cheaping over concrete surface where necessary)20 mm thick (1:6) plaster.
17Labour for Chipping of concrete surface before taking up Plastering work.
18Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
19Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer"s specification and as per direction of the EIC. One Coat.
20Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer"s specification and as per direction of the EIC. (In Ground Floor) watert based interior grade Acrylic Primer
21Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :(Two coats)Standard Quality
22Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer"s specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.(Two Coat),Normal Acrylic Emulsion
23Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thickcement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. Area of each tile upto 0.09 Sq.m.Coloured decorativeWall.
24Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement. 25 mm. thick.
25M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc. For trusses spanning up to 12.00 m
26Supplying , fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make as per IS:15965:2012 and IS:14246:2013 (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). In Roof:- With 0.5 mm thick sheet
27Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed. 20 mm dia bolt. 600 mm long.
28Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc. AndPainting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc .
29Painting with best quality synthetic enamel paint of approved make using of approved putty etc. on the surface, if necessary :On steel or other metal surface :With super gloss (hi-gloss) -Two coats (with any shade except white)
30Supplying, fitting and fixing UPVC pipes A-Type and fittings confirming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor, etc. cutting trenches in any soil through masonary concrete structures etc. if necessary and mending good damagaes including jointing with joining materials(spun,yarn,valamoid/M-seal etc.) complete i) 110 mm diaUPVC Pipes:
31UPVC Fittings . Bend 87.5 degree110mm dia.
32Shoe110mm dia.
33Supplying , fitting and fixing fan hook for ceiling with 1.0m long 16 mm dia. rod complete including mending damages. Payment for damage and repair to be made separately.
34Construction of Plaque with Brickwork Structure providing letters embossed over Granite Board (900 mm x 1200 mm) & fixing it, Plastering , painting etc complete at site as per drawing , specification and direction of the Executive Engineer
35GST as applicable @ 18 % on total work done value (Sl. No. 1 to 34)
36Labour Welfare Cess @ 1 % on total work done value including GST (Sl. No. 1 to 35)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail