Tender For Construction Of Labour Room Toilet At Raniganj Bphc In The District Paschim Bardhaman.
Tender Value
8.14 Lakhs
Estimated cost
Bid Submission
15 Feb 2024
0 days left
EMD
16295
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
asansol → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Labour Room Toilet At Raniganj Bphc In The District Paschim Bardhaman.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation of foundation trenches or drainsin all sorts of soil (includingmixed soil but excluding laterite or sand stone ) including removing spreading or stacking the spoils within a lead of 75 metre as per direction.The items includes necessary trimming the sides of trenches, levelling , dressing & ramming the bottom , bailing outwater as required complete. |
| 2 | Depth of excavation not exceeding 1500 mm |
| 3 | Earth work in filling in foundation trenches or plinth with goode earth , in layers not exceeding 150 mm. Including watering and ramming etc. layer by layer, complete. |
| 4 | With earth obtained from excavation of foundation. |
| 5 | Flling in foundation or plinth by finesand in layers not exceeding 150 mm as directed and consolidating same by through saturation with water and ramming complete including cost of sand. |
| 6 | By Fine sand . |
| 7 | Supplying and laying Polythene sheet (150 gm / sqm ) over damp proof course or below flooring or in foundation trenches . |
| 8 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand . |
| 9 | Ordinary Cement concrete [mix1:2:4]with graded stone chips (20 mm down) excluding shuttering and reinforcement, If any as per IS 456 - 2000. With Panchami variety. |
| 10 | Brick work with 1st class bricks in cement mortar (1:6) |
| 11 | In foundation and plinth |
| 12 | In superstructure |
| 13 | Ground floor |
| 14 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor |
| 15 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. |
| 16 | (i) Pakur Variety |
| 17 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with rewuired bracing for concrete slabs, beams, columns, lintels, curved or straight including fitting , fixing and stricking out after completion of works. |
| 18 | 25 mm to 30 mm wooden shuttering |
| 19 | Upto Ground floor roof level |
| 20 | 25 mm to 30 mm shuttering without staging in foundation etc. |
| 21 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, strips binders etc. including supplying of roads, initial straightening and removal of loose rust (if necessary) cutting to requisite length hooking and bending etc. complete as per drawing and direction. |
| 22 | For M.S. / Tor steel.[SAIL / TATA / RINL] |
| 23 | Upto Ground floor roof level. |
| 24 | Plaster (to wall, floor, etc.) with sand and cement mortar including rounding off or chamfering corners, as directed and racking out joints roughening of concrete surface including chipping and application of cement slurry where necessary etc. complete. |
| 25 | With 6:1 cement mortar. |
| 26 | 15 mm thick plaster (Out side) |
| 27 | In ground floor. |
| 28 | With 6:1 cement mortar. |
| 29 | 20 mm thick plaster (Inside) |
| 30 | In ground floor. |
| 31 | 10 mm thick plaster in (1:4)(Celing) |
| 32 | In ground floor. |
| 33 | Neat cement punning about 1.5 mm thick in wall , dado, window sills, floor, drain etc. |
| 34 | 40 mm. thick damp proof course with cement concrete (1:1.5:3) (with graded stone chips 20 mm nominal size) with water proofing compound of approved brand @ 0.2% weight water proofing compound of approved brand @ 0.2% weight of cement including cost of materials over two coats of nontoxic acrylic polymer modified cementitious waterproofingslurry coat complete [cost of water proofing compound andnon toxic paint to be paid seperately) for underground waterretaining structures. |
| 35 | Supplying, fitting and fixing Marble Slab/tile of 15 to 18mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor. {White cement and Pigment to be supplied by the Agency] |
| 36 | a) With Makrana plain pink / Adranga Pink / Garbh Gulabi / Udaypur pink / Udaypur Green / Black Bhaslana |
| 37 | i) Area of each Slab/tile upto 0.3 sq.m |
| 38 | Artificial stone in floor , dado, staircase etc.with cement concrete (4:2:1) laid in panels as directed, with topping made with ordinary or white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding off corners including application of cement sullry before flooring works, using cement @ 1.75 kg/sqm all complete including all materials and labour.(In G Floor/ With graded stone chips :3 mm thick topping (High polishing grinding on this item is not permitted) with ordinary cement. |
| 39 | 25 mm thick artificial stone.(In Ground floor.) |
| 40 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors and 4 nos. key stone (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. |
| 41 | Wall - with sand cement mortar (1:3) 15mm thick & 2mm thick cement slurry at back side of tiles using cement @2.91 kg/sq.m. and joint filling using white cement slurry @ 0.2 kg/Sq.m. |
| 42 | Area of each tile upto 0.09 Sq.mColoured Decorative ]In Ground floor. |
| 43 | Supplying fitting and fixing windows and ventilators with or without integrated grills conforming to I.S. 1038 -1975 and manufactured from rolled steel sections conforming to I.S. to 7452 - 1974 with non friction projection, straightnening if required, fixing lugs in cement concrete (4:2:1) with stone chips 19 mm down , cutting holes and mending good damages to match wuth existing surface complete in all respect excluding glazing. |
| 44 | Opeanable steel windows as per I.S. sizes with side hung shutters and horizontal glazing bars , with or without fixed type ventilators in Ground floor |
| 45 | Central hung ventilators as per I.S sizes 580 mm |
| 46 | Ground floor |
| 47 | Two point nose steel hande including fitting and fixing. |
| 48 | Steel peg stay 300 mm long including fitting and fixing. |
| 49 | M.S inegrated griil as per approved design integrated with steel window or ventilator, joints continuosly welded with M.S. flats and bars. |
| 50 | Supplying best Indian sheet glass pans set in putty and fitted and fixed with nails and putty complete in all floors. |
| 51 | 4.0 mm thick. |
| 52 | Priming one coat on steel or other metal surface with synthetic enamel/ oil bound primer of approved quality including smoothening surfaces by sand papering etc |
| 53 | On steel surface |
| 54 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary |
| 55 | On Steel surface / hi- gloss |
| 56 | Two coats (with any shade except white). |
| 57 | Supplying fitting and fixing UPVC pipes A type and fitting conforming to Is: 13592-1992with all necessary clamps nails, including making holes in walls, floors etc. cutting trenches in any soilthorugh masonry concrete structure etc. .f necessary and mending good damages including jointing with jointing materials(Spun yarn,valamoid / bitumen / M.seal etc.) complete. |
| 58 | 110 mm diameter. |
| 59 | Supplying ,fitting and fixing UPVC fittings conforming to IS 13592-1992. |
| 60 | Plain tee110 mm |
| 61 | Shoe 110 mm dia |
| 62 | Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand ( 1.5 mm thick) |
| 63 | Acrylic distemper to interior wall , celling with a coat of solvent based interior grade acrylic primer as per manufactures specification including cleaning and smoothing of surface. |
| 64 | Two coats |
| 65 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparingthe surface thoroughly, complete as per manufacturer\"s specification and as per direction of the EIC. |
| 66 | One Coat |
| 67 | Ground floor |
| 68 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer |
| 69 | Two Coat |
| 70 | a) Normal Acrylic Emulsion |
| 71 | Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C.multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm) wall hickness.Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. galvanised tubular \"L\" shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mmx25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials,labour, and hire of tools and plants and appliancesi/c carriage of all materials taxes and all other incidental charges complete |
| 72 | PVC Door Shutter-30 mm thick: |
| 73 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved makeonformingto IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made foraccesories, specials |
| 74 | 15 mm. dia Medium Quality |
| 75 | 25 mm. dia Medium Quality |
| 76 | Supplying, fitting and fixing Peet\"s valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.) |
| 77 | 25mm. |
| 78 | Supplying, fitting and fixing orrisa pattern water closet in white glazedvitreous china ware of approved make inposition complete excluding P trap. |
| 79 | 580 x 440 mm long |
| 80 | Supplying, fitting and fixing EWCin white glazedvitreous china ware of approved make inposition complete with P trap. |
| 81 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (ii) Plastic (hallow type) white |
| 82 | Supplying fitting and fixing 10 litre PVClow down cistern of approved make with either side or bottom inlet, side over flow, brackets complete with all internal fittings |
| 83 | Best Quality |
| 84 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. Brackets on 75 mm. x 75 mm wood blocks,C.P. waste fittings of 32 mm dia, one approved quality brass C.P. pillar cock of 15 mm dia, C.P. chain with rubber plug of 30 mm dia, approved quality P.V.C. waste pipe with C.P. nut 32 mm dia, 900 mm long approved quality P.V.C. connecton pipe with heavy brass C.P nut including mending good all damages and painting the brackets with two coats of approved paint. |
| 85 | 550 mm. x 400 mm. size |
| 86 | Supplying, fitting and fixing Aluminium domical grating |
| 87 | 125 mm |
| 88 | Supplying, fitting and fixing CP Stop Cock (Equivalent to code no 514 (A)& Model - Tropical of ESSCO or similar branch) 15 mm |
| 89 | Supplying, fitting and fixing Bib Cock CP short body (Equivalent to code no 512 & Model - Tropical of ESSCO or similar branch) 15 mm |
| 90 | Supplying fitting and fixing towel rail with two brackets |
| 91 | C.P. over brass |
| 92 | 25 mm dia. and 600 mm long |
| 93 | Supplying, fitting and fixing PTMT Smart Shelf of approved make of size 300 mm. |
| 94 | Supplying fitting and fixing best quality bevelled edge mirror 5.5 mm thick silverred as per I.S. 3438 / 1965 together with brass C.P.hinges |
| 95 | 450 x 300 mm |
| 96 | Supplying, fitting and fixing approved brand P.V.C. Connector white flexible with both end coupling with heavy brass over C.P. nut 15 mm. dia. |
| 97 | 600 mm. long |
| 98 | Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer?s specification and direction of Engineer-in-Charge. |
| 99 | Constructing Inspection pit of inside measurement 600mm x 600mm x upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L and 20 mm. thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surface of the slab and one 560 mm dia.R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. |
| 100 | Pakur variety stone chips with SAIL /TATA /RINL Steel |
| 101 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. |
| 102 | PolytheneFlush Pipe |
| 103 | Supplying PVC water storage tank of approved quality with closed top with lid (black-multi layer) 1000 lt. capacity. |
| 104 | Labour for hoisting P.V.C water storage tank from G.L. to the roofupto 1500 lt. capacity. |
| 105 | Upto 1st story from G.L |
| 106 | Labour for punching hole upto 50 mm dia. |
| 107 | Supplying of UPVC Pipe (B type) and fittings conforming to IS 13592 -1992 . |
| 108 | Single socketed 3.0 m length |
| 109 | 110 mm |
| 110 | 160 mm |
| 111 | Fittings : |
| 112 | Door Tee110 mm |
| 113 | Door Bend 110 mm |
| 114 | Door Bend 160 mm |
| 115 | Plain tee Tee160 mm |
| 116 | 87.5 Bend 110 mm dia |
| 117 | 87.5 Bend 160 mm dia |
| 118 | Vent cowl 110 mm dia |
| 119 | Pipe Clip |
| 120 | Rubber Ring |
| 121 | Nahani trap 90 mm |
| 122 | Rubber Lubricant 500 ml |
| 123 | Solvent Cement 250 ml |
| 124 | Supplying, fitting and fixing soap holder(a) PTMT (Prayag or equivalent) |
| 125 | Supplying, fitting and fixing pedestal of approved make for wash basin (white) |
| 126 | M.S. Clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. In cement concrete (1:2:4) including cutting of brick work/concrete work as per direction.40 x 6 x 200 mm |
| 127 | Iron Butt Hinges of approved quality, fitted and fixed with steel screw with ISI mark, size 100mm x 58mm x 1.90 mm.(oxidised) |
| 128 | Anodised aluminium barrel /tower/ socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: |
| 129 | 150 mm long x 10mm dia. bolt. |
| 130 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming toI.S. specification (I.S. 2681/66) fitted and fixed complete. |
| 131 | 250 mm x 16 mm dia. bolt. |
| 132 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: |
| 133 | 125 mm grip x 10 mm dia rod. |
| 134 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having ISO mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement cone (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (6:1) and 1.00m inside dia.[Pakur variety stone chips with SAIL /TATA /RINL Steel] |
| 135 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. [Pakur variety stone chips with SAIL /TATA /RINL Steel] |
| 136 | For 20 users with pakur varite |
| 137 | Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) withjhama chips complete.(i)450 mm X 350 mm |
| 138 | Supplying fitting and fixing plaque made of Granite slabs ( single piece)of 15 mm to 18 mm thick with uniform texture and without decorative veins in facia etc fixing with using Cement slurry at back side of granite @4.4 kg/sq.m andwhite cement slurry for joint filling @1.8 kg/sq.m.including making lettering , sign marks etc as per direction in the granite slabs withfixed at brick wall (in 1:6) as directed including earth cutting , 75 mm thick sand filling , 75 mm thick Cement concrete (1:2:4) and plastering with 20 mm thick sand cement mortar (6:1)as specifed by the Department including wall putty ,Acrylic primer & Super Protective 100% Acrylic Emulsion two coatsincluding all incedential charges for labours , materials , machinaries & transportig charges complete in all respect as per direction of EIC. |
| 139 | Sub-Total |
| 140 | Add GST @ 18%on Sub-Total Cost,i.e. |
| 141 | Add Labour Welfare Cess @ 1% on Total cost after GST, i.e. |
AI Tender Summary
Tender Timeline
Feb 01, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 15, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 19, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender