Delhi Jal Board-DJB has published Improvement Of De-Watering System And Allied Works Of A-Block Sarita Vihar Sps Okhla Constituency Ac-54.. Submission Date for this Tender is 08-02-2024. Industrial Process Machinery and Equipments Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Making of all safety arrangements ie. Safety belt, Ladder, gas mask. gas detector, gum boots, safety hamlet, safety shoes, hand Gloves etc for Execution of all work. |
| 2 | Supply of portable dewatering submersible pump set for dewatering Sewagewater, containing sand, silt etc. of capacity 5 HP/ 3.7 KW having discharge of 800-600 LPM at 15-20 mtrs. Head, Delivery Size-80mm, suitable for 415 volt, 3 phases, 50HZ A.C Supply along with 05 mtrs., waterproof cable. (Make- SU/Mody / KSB/ DJB approved. DJB SOR (E&M) 2022, Item Code- 2.1.5 |
| 3 | Providing of IN DOOR TYPE 5HP LT Cubical type electrical Panel board Floor/Wall Mounted of welded construction of size 1370mm x 760mm x 460mm fabricated with 16 SWG M.S. sheet with horizontal and vertical intermediate chamber of suitable size on suitable size insulating board to make the Panel Robust, having double door with 14 SWG S.S hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating , Vermin proof having following items. (1) MCCB 63 Amp, 4 Pole-1No. (2) RCCB/ELCB 63 Amp, 4 Pole with earth fault indicator and positive contact indication protecting a circuit automatically 1No. (3) DOL starter of 5HP, 3Phase oil immersed type 1No (4) Digital Ampere meter 96mmx96mm square shape of 0-30 Amp range 1No (5) Digital Voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1No. (6) LED Indicating lamps with fitting (a set of 3 lamps) 1Set. (7) Shunt capacitor of 5 KVAR with three phase isolator 1No (8) Motor Protection Assembly having Earth Leakage protection, Phase sequence corrector, Single phasing protection, Over load protection, High voltage-low voltage protection. 1No. (9) Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa) up to 10 H.P.1No. Complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc as required. The panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame. Make:-All the insert used in Panel must be of DJBapproved makes and should be ISI marked where make of that equipment is not approved. DJB SOR (E&M) 2022, Item Code- 10.2.4 |
| 4 | S/O GI Pipes 80 mm dia. size medium class with GI Flange Welded in both sides 3 mtr long with MS strips complete with threading work on each side of pipe each flange should be 8 holes and cut for cables. Make:- Jindal/TATA/DJB approve |
| 5 | P/o PVC insulated & PVC sheathed flat cable with plain copper conductor having 3 cores 4 sq. mm size for submersible motor. (Each roll of 100 mtrs.) Make:-Havells/Grandley/DJB Approved.DJB SOR (E&M) 2022, Item Code- 29.13.7 |
| 6 | Complete clamping/holding the pump set and pipe with suitable clamp along with nut and bolts and washers for holding the 80 mm dia. pipe including bending and shaping etc. as required andmaking tee, bend, elbow and other required as per site requirement. |
| 7 | S/o Gun metal gate valve of 80 mm dia. Make:Skope/MARCK/ DJB approved. DJB SOR (E&M) 2022, Item Code- 4.44.10 |
| 8 | Providing of 80 mm dia. CI D/F non return valve of size 50mm dia., as per IS 5312, PN 1.0 CI Body, Door/Bronze to Rubber rings/SS410 Twin Pin.Make: IVC/ Kirloskar/ Skope/ DJB Approved. DJB SOR (E&M) 2022, Item Code- 4.9.4 |
| 9 | S/O required off size threaded nut-bolts of good quality I.S.I |
| 10 | S/o Neoprene rubber packing of good quality having 50% neoprene. Make: Jyoti / DJB approved.DJB SOR (E&M) 2022, Item Code- 22.6.1 |
| 11 | Makingof pit for installation of submersible p/set with the help of pneumatic hammer/ mannual labour, Breaking of RCC pit by power hammer & manual labour includes, removing /cleaning, Filling/strengthening of CC structure of piti/call civil work as required for installation ofone nos. pump set in each pit. |
| 12 | Installation of Submersible pump sets , 01nos. p/set in each pit , suitable arrangement & all Electrical itemsetc., all piping work, fixing of valves and accessories executing minor civil works, making electrical connections with cable as required size, taking all safety measureswith all tool and tackles etc. |
| 13 | Testing and commissioning of all E&M equipment at No load and full load conditions as per standard with full satisfaction of Engineer-In-Charge. This is a turnkey joband it further includesany left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. |
| 14 | Cartage/Shifting the pump set, pipe and other items from tempo to pump house base framewith mannual heavy labour i/c loading and unloading at site etc. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
