Public Works Department-PWD has published Tender For Civil Work - Special Repairs To Flooring, Cupboard, Arrangements And Other Repair Works In Rdo Office At Ponneri.. Submission Date for this Tender is 06-02-2024. Civil Work Tenders in ponneri Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Relaying of granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panellingwherever necessary and as directed by the departmental officers) 25mm thick |
| 2 | Reconstruction of Brick work in cement mortar 1:5 (One cement and five sand) using using best quality II class Ground moulded chamber burnt bricks of size 9" x 43/8"x 2 3/4"in for foundation andbasement and super structure,complying withstandard specification including curingetc complete as directed by the departmental officers. |
| 3 | For Foundation and basement |
| 4 | Replastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 5 | Renewing the damaged steel doors with the following specification, MS Angle of size 40 x 40 x6mm at 3.5 Kg / m are used for outer frames and MS Angle of size 35 x 35 x 5mm at 2.6 Kg / m for the shutter frames.Stiffeners with MS Flat 32 x 6mm at 1.50 Kg / m is provided for fixing the aldrop for the door and welded intact 18 gauge CR Sheet is laid as panel in the shutters and welded intact of 1/3 bottom portion of the shutters, 2/3 portion at top provided with MS Grill at 20 Kg / m2 as per design and laid as panel in the shutters.Necessary "J" section having MS Angle 46 x 25 x 3mm at 2.38 Kg /m is provided in between MS Grill and CR Sheet for compact fixing of the grill and sheet in position.The design and style for the upper panel shoule be approved by the departmental officers.MS Flat 18 x 5mm at 0.7 kg / m is welded as additional stiffeners at the rear side of the shutter in the bottom panel for strength and durability.MS Flat 32 x 3mm at 1.10 Kg / m is provided over the edge of one shutter in case of double door, to conceal the gap between the shutters.and 4 Nos. of hinges in double leaf doors are provided at an appropirate place in the outer frame.6 Nos. of hold fasts of 200mm in length spliced at the ends are welded to the outer frame of the door.Tower bolts 2 Nos. one at top and the other at the bottom are provided.In case of double leaf door one number aldrop is provided at an appropirate place in the doors; two numbers aldrop in single leaf door.A tie bar is provided at the bottom of the outer frame to prevent twistng of frame during transportation or fixing.All members are given one coat of red oxide primer as directed by the departmental officers.The rate includes cost of all materials, labour charges, taxes, transportation to site of work, loading, unloading and all other incidental charges, etc., complete. |
| 6 | Two Leaf |
| 7 | Renewing the damaged Cup-board Shutter arrangements of size 1.20m length, 0.45m breadth and 2.40m height using termite proof / water plywood, 19mm thick, cupboard with openable shutter and 1mm thick over both side laminated sun mica sheet using fevicol along with furniture fittings such as hinges, handle, multipurpose lock etc., complete complying with standard specification. |
| 8 | Renewing and refixing "L" shaped Executive Office Table )5" - 0 x 3"-0 & 4"-0 x 1"-6"") with drawer arrangements using termite proof / water plywood, 19mm thick and 1mm thick over both side laminated sun mica sheet using fevicol along with furniture fittings such as hinges, handle, multipurpose lock etc., complete complying with standard specification. |
| 9 | Reroofing with best quality prelaminated galvanisediron powder coated sheet of 0.47m thick of approved colour design and quality including cost of self tapping screws between washerand cutting the sheet to required slop if found necessary during execution of workhave charges for machine etc.,complete.As per approved rate. |
| 10 | Renewing and refixing 50mm dia GI pipe for staircase hand rail including labour charges for cutting, welding and fixing with MS flats (excluding cost of flat), etc., as directed by the departmental officers. |
| 11 | Renewing and refixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct. (38/40mm thickness) |
| 12 | Repainting two coats of old plastered wall surface with ready mixed plastic Interior emulsion paint of first class quality and of approved colour without primer including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 13 | Repainting two coats of old plastered wall surface with ready mixed plastic exterior emulsion paint of first class quality and of approved colour without primer including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 14 | SUB TOTAL |
| 15 | GST @ 18 % |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
