Tender For Supply Of Essential Machinery For Establishment Of Seed Processing Unit, latur-Maharashtra

Supply Of Essential Machinery For Establishment Of Seed Processing Unit , Seed Processing Unit- Capacity- 4Tph ( Complete With All Standard Accessories And Feature. ) ( All Ms Material Should Be Powder Coated ) A ) Fully Automatic Pre-Cleaner In Standard Construction Technical Data: • Screen Size – 925 Mm X 600 Mm • No. Of Screens– 07 • Screen Area– 5.00 M2 • Screen Moc –Screens Should Be Made Of 1.0 Mm ( 20 Gauge ) Galvanized Iron Sheet And Supported On Aluminum Frame. • Motor, Fan – 5.00 Hp • Motor, Sieve Boat– 2.00 Hp • Air Volume – 6500 M3 / Hr • Cyclone Diameter – 1000 Mm • No. Of Rubber Balls / Machine – 600 Pcs • Length Of Bottom Frame – 2760 Mm • Width Of Bottom Frame – 920 Mm • Machine Ht. Without Fan– 2560 Mm • Fan Height– 715 Mm • Capacity* Pre-Cleaning On Soyabean – 4 Tph •The Outer Size Of The Machinery– ( Lxwxh ) 10’Ftx3’Ftx13’Ft •The Material For The Construction Of Machinery-Ms Sheets ( Powder Coted ) Of Gauge 3-4Mm. •Complete Cnc Punching, Bending And Cutting. •With Inlet And Feed Roll, Pre-Aspiration, Tail Aspiration And Waste Outlet On The Right-Hand Side ( While Viewing From Feed End ) . •With One Sieve Boat With One Short Screen Layer All Cnc Punching ( 1 Screen Parts ) One Long Grading Screen Layer All Cnc Punching ( 2 Screen Parts ) And One Long Sand Screen Layer All Cnc Punching ( 2 Screen Parts ) •With Built-On Fan, Firm Drive And Motors. •Incl. One Set Of Screens ( Field Perforated ) + Ball Frames. B ) Fully Automatic Fine Cleaner In Standard Construction With Hinged Door Technical Data : • Screen Size- 925 Mm X 1180 Mm • No.Of Screens– 07 • Screen Area – 11.50 M2 • Motor, Fan– 7.50 Hp • Motor, Sieve Boat – 2.00 Hp • Air Volume– 8000 M3 / Hr • Cyclone Dia ( Not In Our Scope ) – 1400 Mm • No. Of Rubber Balls / Machine – 840 Pcs • Length Of Bottom Frame – 2910 Mm • Width Of Bottom Frame – 2200 Mm • Machine Ht. Without Fan– 1990 Mm • Fan Height– 760 Mm • Capacity* Fine Cleaning On Soyabean – 4 Tph • Screen Moc –Screens Should Be Made Of 1.0 Mm ( 20 Gauge ) Galvanized Iron Sheet And Supported On Aluminum Frame. •The Material For The Construction Of Machinery -Ms Sheets ( Powder Coated ) Of Gauge 3-4Mm. •The Outer Size Of The Machinery ( Lxwxh ) –10’Ftx5’Ftx12’Ft 1. Capacity Regulator 2. Feed Roller 3. Adjusting Device For Pre-Aspiration 4. Main Air Control 5. Aspiration Fan 6. Heavy Air-Separated Waste 7. Material Thickness Control 8. Overflow From Scalper Screen 9. Light Air – Separated Waste 10. Adjusting Device Or Tail Aspiration 11. Through From Middle Screen 12. Overflow From Middle Screen 13. Tail Aspiration Channel C ) Fully Automatic Fan Gravity Separator With Standard Construction Technical Data : • Capacity– 4 Ton Per Hour • No. Of Fans– 7 No.S • Size Of Deck– 1200 Cms X 3000 Cms • Type Of Deck – Rectangular Type • Electric Drive – 10.00 Hp • Motor – 3 Ph.50 Cycle Ac Supply • Vfd Vibro Motor – 2.00 Hp •The Material For The Construction Of Machinery -Ms Sheets ( Powder Coated ) Of Gauge 3-4Mm. •The Outer Size Of The Machinery ( Lxwxh ) –10’Ftx6’Ftx5.5’Ft Machine Should Have Following Features: • All Cnc Punching, Bending & Cutting. • Rectangular Deck For Greater Capacity And Accuracy, Quickly & Easily Interchangeable Type. • Fans Are Dynamically Balanced With Individually Adjustable Air Control For Each Fan For Precise Control Of Air Flow. • All The Fans Are Mounted On One Common Shaft. • Variable Oscillation Speed Of Deck In Wide Range. • Deck Assembly Is Rested On Four Specially Designed Levers With Bearings For Smooth And Trouble-Free Operation. • Variable Inclination Of Deck Side Wise And Length Wise In Wide Range. • Seed Collecting Spouts Are Fitted With Bag Holding Clamps. • Eccentrics Are Counter Balanced Giving Smooth Oscillation To The Deck. • Miniature Feeding Hopper With Variable Feeding Rate Through Controlled Gate. • Built In Air Filters Can Be Easily Removed For Easy Access To The Moving Parts. •Provision For Dust Hood D ) Magnetic Destoner Separator With Standard Construction Technical Data : •Capacity– 4 Tph •Nos. Of Roller –1 Nos. Magnetic Roller And 1 Nos. Nonmagnetic Roll •Diameter – Ø100 Mm ( 4” ) •Length– 1250 Mm Length Roller ( 50 Inch Approx. ) • Shaft Of Magnetic Roller – Total Steel Shaft •Magnet Size –100 Mm • Size Of Machine –1400 Mm X 1100 Mm X 1100 Mm • Feed Hopper Size : 1070 Mm ( L ) X 600 Mm ( W ) X 600 Mm ( H ) Input Hopper • Moc –Ss Construction Powder Coated 3 Mm Thickness. • Back Roller –M.S. Behind With Bearing • Divider – 100 Mm X 1150 Mm Divider With Excitable • Iron Tray Size – 1200 Mm ( L ) X 300 Mm ( W ) Two Nos. Tray / Direct • Weight – 650 Kg Approx. •Vibrator Motor : 0.5 H.P. X 1 Nos.1440 Rpm Vibrator Motor •Spring –4 Nos. Springs With Nylon Bush •Belt Size –1250 Mm ( W ) X 1000 Mm ( D ) •Motor Phase –1. H.P. 3 Phase 6 Pole Motor 1440 Rpm Motor D ) Magnetic Destoner Separator With Standard Construction Technical Data : •Capacity– 4 Tph •Nos. Of Roller –1 Nos. Magnetic Roller And 1 Nos. Nonmagnetic Roll •Diameter – Ø100 Mm ( 4” ) •Length– 1250 Mm Length Roller ( 50 Inch Approx. ) • Shaft Of Magnetic Roller – Total Steel Shaft •Magnet Size –100 Mm • Size Of Machine –1400 Mm X 1100 Mm X 1100 Mm • Feed Hopper Size : 1070 Mm ( L ) X 600 Mm ( W ) X 600 Mm ( H ) Input Hopper • Moc –Ss Construction Powder Coated 3 Mm Thickness. • Back Roller –M.S. Behind With Bearing • Divider – 100 Mm X 1150 Mm Divider With Excitable • Iron Tray Size – 1200 Mm ( L ) X 300 Mm ( W ) Two Nos. Tray / Direct • Weight – 650 Kg Approx. •Vibrator Motor : 0.5 H.P. X 1 Nos.1440 Rpm Vibrator Motor •Spring –4 Nos. Springs With Nylon Bush •Belt Size –1250 Mm ( W ) X 1000 Mm ( D ) •Motor Phase –1. H.P. 3 Phase 6 Pole Motor 1440 Rpm Motor E ) Fully Automatic Elevator With Standard Construction •Moc –Ms Construction Powder Coated 2 Mm Thickness With Cnc Cutting, Punching And Bending. •Belt - Oil Resistant •Buckets - 6” Inch Nylon Food Grade •Gearbox Motor Capacity -1.00 Hp. F ) Dump Hopper •Moc –Ms Construction Powder Coated 2 Mm Thickness With Cnc Cutting, Punching And Bending. •Size - 1524 Mm X 1524 Mm. •Height 915 Mm. G ) Raw Seed Elevator- •Moc –Ms Construction Powder Coated 2 Mm Thickness With Cnc Cutting, Punching And Bending. • Belt - Oil Resistant •Buckets - 6” Inch Nylon Food Grade •Gearbox Motor Capacity -1.00 Hp. H ) Vertical Bucket Elevator •Moc –Ms Construction Powder Coated 2 Mm Thickness With Cnc Cutting, Punching And Bending. • Belt - Oil Resistant •Buckets - 6” Inch Nylon Food Grade •Gearbox Motor Capacity -1.00 Hp. I ) Holding Bin For Pre-Cleaner •Moc –Ms Construction Powder Coated 2 Mm Thickness With Cnc Cutting, Punching And Bending. •Size - 610 Mm X 458 Mm And Height 458 Mm. •Discharge Gate – Manually Operated • Seed Level Viewing – Transparent And Unbreakable Sheet • The Top Of The Holding Bin Is To Be Covered With Open-Able Cover Of 2Mm Thick M.S. Powder Coted, With Door For Inspection And Cleaning. J ) Waste Product Chute For Pre-Cleaner All Ms Steel Laser Cutting, Cnc Bending And Punching And Is Used For Removing All The Waste Products Through Conveyor Shaft From The Seeds.K ) Ducting For Pre-Cleaner All Cold Roll Steel Sheet Cnc Bending & Cutting Used To Remove The Dust Particles Through The Blower Installed On The Machine Towards Outside. Size Of The Ducting Would Be 305Mmx305mm L ) Mounting Stand With Extension Platform For Pre-Cleaner All Ms Steel Construction, The Size Of The Frame Is 1220 Mm X 1524 Mm Used To Mount The Machinery Fixed With Steel Nuts And Bolts. M ) Holding Bin For Fine -Cleaner •Moc –Ms Construction Powder Coated 2 Mm Thickness With Cnc Cutting, Punching And Bending. •Size - 915 Mm X 458 Mm And Height 458 Mm. •Discharge Gate – Manually Operated • Seed Level Viewing – Transparent And Unbreakable Sheet • The Top Of The Holding Bin Is To Be Covered With Open-Able Cover Of 2Mm Thick M.S. Powder Coted, With Door For Inspection And Cleaning. N ) Waste Product Chute For Fine -Cleaner All Ms Steel Laser Cutting, Cnc Bending And Punching And Is Used For Removing All The Waste Products Through Conveyor Shaft From The Seeds. O ) Ducting For Fine-Cleaner All Cold Roll Steel Sheet Cnc Bending & Cutting Used To Remove The Dust Particles Through The Blower Installed On The Machine Towards Outside. Size Of The Ducting Would Be 305Mmx305mm P ) Mounting Stand With Extension Platform For Fine-Cleaner All Ms Steel Construction, The Size Of The Frame Is 1829 Mm X 1524 Mm Used To Mount The Machinery Fixed With Steel Nuts And Bolts. Q ) Holding Bin With Mtg Stand For Gravity Separator •Moc –Ms Construction Powder Coated 2 Mm Thickness With Cnc Cutting, Punching And Bending. •Size - 2134 Mm X 915 Mm, And Height 1829 Mm. •Discharge Gate – Manually Operated • Seed Level Viewing – Transparent And Unbreakable Sheet • The Top Of The Holding Bin Is To Be Covered With Open-Able Cover Of 2Mm Thick M.S. Powder Coted, With Door For Inspection And Cleaning. • Installed On The Square Heavy Ms Channel Fixed With Steps. • Channel Height From Ground Level -4420 Mm. R ) Holding Bin For Magnetic Destoner •Moc –Ms Construction Powder Coated 2 Mm Thickness With Cnc Cutting, Punching And Bending. •Size - 1828 Mm X 610 Mm, And Height 1829 Mm . •Discharge Gate – Manually Operated • Seed Level Viewing – Transparent And Unbreakable Sheet • The Top Of The Holding Bin Is To Be Covered With Open-Able Cover Of 2Mm Thick M.S. Powder Coted, With Door For Inspection And Cleaning. • Installed On The Square Heavy Ms Channel Fixed With Steps. • Channel Height From Ground Level -3963 Mm. S ) Packing Bin With Mtg Stand •Moc –Ms Construction Powder Coated 2 Mm Thickness With Cnc Cutting, Punching And Bending. •Size - 2438 Mm X 915 Mm, And Height 1829 Mm. • Seed Level Viewing – Transparent And Unbreakable Sheet • The Top Of The Holding Bin Is To Be Covered With Open-Able Cover Of 2Mm Thick M.S. Powder Coted, With Door For Inspection And Cleaning. • Installed On The Square Heavy Ms Channel Fixed With Steps. • Channel Height From Ground Level -4725 Mm.. • Compatible With Automatic Bag Weighing And Filling Machine T ) Automatic Bag Weighing And Filling Machine Ideal For All Type Of Grains •Capacity – 20-100 Kg •Output– 3-4 Bags Per Min U ) Sewing Machine Capacity - 250 - 300 Bags / Hour Type -Electric V ) Ladder And Plat Form For Elevators All Laser Cutting Ms Steel Construction, Fixed On The Elevators And Ladder Is Used As Steps To Climb On The Elevators And Platform Is Fixed On The Above Of The Elevator For Installation Of The Gear Box Motor Of The Elevators. W ) Control Panel Box And Electrification For All Machinery Mccb Tp+N 100A With Oc, Sc & Rhom R, Y, B Indicating Lamp 230V Ac Led Type Sp Mcb 6A 10Ka Multi Data Meter Vaf 3Phase Em6459 Current Transformer 100: 5 Ci .1 5Va Emergency Push Button With 1Nc Block Single Phase Preventer 3Phase Avld2 Tower Light 2Tier Red & Green With Buzzer 230V Control Transformer 415 / 230V 500Va Mimic 500X500 6 Fan 230V Filter 6 Cfl With Dls 2Change Over Relay With Base 230V Ac Push Button Yellow 22.5Dia With 1No Push Button Green 22 5Dia With 1No Mimic Lamp 230V Ac Bi Colour Red& Green , 160 Kva Three Phase Diesel Generating Set Technical Specification: A ) Diesel Engine:- Diesel Engine Model, Six Cylinders Inline, Liquid Cooled, Turbocharged With After Cooled, Developing 200 Bhp @ 1500 Rpm. Engine Is With Electric Start, Compression Ignition, 4 Stroke Cycle, Designed To Run Continuously At 1500 Rpm. It Confirms To Is 10002, Iso-3046, Bs 5514 Standards. All Diesel Engines Are Complied With Latest Cpcb Norms. The Diesel Engines Are Comprising Of Followings: • Radiator With Fan • Fuel Injection Equipment With Electronic Governor • Dry Type Air Cleaner • Exhaust Silencer • Lube Oil Filter ( Spin On Type ) • Fuel Oil Filter ( Spin On Type ) • 12V Electric Starting System • Battery Charging Alternator • Stop Solenoid • Lube Oil Pressure Gauge • Water Temperature Gauge • Lube Oil Temperature Gauge • Battery Voltage • K - Cool Super Plus Coolant • First Fill Lube Oil • Status Indicator • Aesthetically Enhanced Genset • Krm ( Koel Remote Monitoring ) System In Built In Dg Set • Qr Code Enabled Genset B ) Alternator: - Alternator, Suitable For Continuous Duty Operations Rated At 1500 Rpm 415 V, 0.8 Pf, 50Hz, 3Ph. In Spdp Enclosure, Self- Excited & Self- Regulated, Brush Less, ‘H’ Class Insulation, Floor Mounted With Anti-Frication Shielded Ball Bearing On End. The Alternator Conforms To Is: 4722, Bs En 60034-1 Suitable For Tropical Conditions. C ) Base Frame: - Suitable To Couple Above Engine & Alternator Made From Steel Sheet Metal. D ) Fuel Tank: - 8 Hrs Capacity For Continuous Running, With Diesel Fuel Inlet & Outlet, Air Vent & Drain Plug Arrangements. E ) Battery: - 1 No.12 V Battery With Leads , Computer Pc Specifications:- Item Condition: New Processor: I5 Gen 12Th Ram: 16Gb Ram Hdd / Ssd: 1 Tbhhd + 256Ssd Operating System: Window 11Home Screen: 27 Inch Cpu :- Inbuilt Warranty:1 Year Warranty , Printerwithscanner Specifications :- Connectivity-Usb, Ethernet & Wi-Fi Function Type- All-In-One Printer A4 Size Functions-Print, Scan, Copy , Air Conditioner ( Split 5 Star ) Specifications :- 1.5 Ton 5 Star Inverter Indoor Split Ac, Area – 150 Sq.Ft. , Wifisetup Specifications :- Local 100 Mbps Speed , Cctv Camera Setup With Led Tv Specifications:- True Day / Night Resolution Tvl-5 Mp ( Colour ) Digital ( Dsp ) -Yes Sensitivity Lux-0.01 Electrical Specifications Voltage: 12 V Dc Power Consumption: 5 W Focal Length Mm -2.8 ~ 6 Picture Elements Hxv -2052 X 1536 Back Light Compensation-Yes Auto Gain Control- Yes Tv – 55” , Electricity 4000 Sq.Feet :- Electric Pipes & Pvc Casting Caping Pipe Wiring 3Phase & Single Phase Boards 15 Switches & Stoppers, Lights, Focus Lamps - Other Accessories Electrical , Portable Cabin Size-20*20 Build Type- Aluminium With Glass Pvc Ceiling , Furnitureandfixture:- Woodentablesize – 1400 X 600 X 750 Mm Computertable Size – 4 X 2 X 2.5 Feet ( Wooden ) Registrationtable Size – 60 Inch X 28 Inch ( Wooden ) Office Chairssize – 76 X 112 X 76 ( Movable & Height Adjustable ) Guest Chair-Arm Rest With Armrest, Back Type Mid Back, Dimensions 420 Mm*420 Mm*815 Mm · Load Capacity 125 Kg · Foldability Non Foldable, Equipped With A Leatherette Cushion-Seat For Enhanced Comfort.

INR 1024 /-

INR 78000.0 /-

Refer document

Name of Work: Seed Processing Unit Laboratory

Sl. No.	Item Description
1	Seed Processing Unit- Capacity- 4TPH (Complete with all standard accessories and feature.) (All MS material should be Powder Coated) A) Fully Automatic Pre-Cleaner in Standard Construction Technical Data: • Screen Size – 925 mm x 600 mm • No. of Screens– 07 • Screen Area– 5.00 m2 • Screen MOC –Screens Should be made of 1.0 mm(20 Gauge) Galvanized Iron Sheet and supported on Aluminum frame. • Motor, Fan – 5.00 HP • Motor, Sieve boat– 2.00 HP • Air Volume – 6500 m3/hr • Cyclone diameter – 1000 mm • No. of Rubber Balls/Machine – 600 pcs • Length of Bottom frame – 2760 mm • Width of Bottom frame – 920 mm • Machine Ht. without Fan– 2560 mm • Fan height– 715 mm • Capacity* Pre-Cleaning on Soyabean – 4 TPH •The outer size of the machinery–(LxWxH) 10’ftx3’ftx13’ft •The Material for the Construction of machinery-MS Sheets (powder coted) of gauge 3-4mm. •Complete CNC Punching, Bending and Cutting. •With inlet and feed roll, pre-aspiration, tail aspiration and Waste outlet on the right-hand side (While viewing from feed End). •With one sieve boat with one short screen layer all CNC Punching (1 screen Parts) one long grading screen layer all CNC Punching (2 screen parts) and one long sand screen layer all CNC Punching (2 screen parts) •With built-on fan, firm drive and motors. •Incl. one set of screens (field perforated) + ball frames. B) Fully Automatic Fine Cleaner in Standard Construction with Hinged Door Technical Data : • Screen Size- 925 mm x 1180 mm • No.of Screens– 07 • Screen Area – 11.50 m2 • Motor, Fan– 7.50 HP • Motor, Sieve boat – 2.00 HP • Air Volume– 8000 m3/hr • Cyclone dia (not in our scope) – 1400 mm • No. of Rubber Balls/Machine – 840 pcs • Length of Bottom frame – 2910 mm • Width of Bottom frame – 2200 mm • Machine Ht. without Fan– 1990 mm • Fan height– 760 mm • Capacity* Fine Cleaning on Soyabean – 4 TPH • Screen MOC –Screens Should be made of 1.0 mm (20 Gauge) Galvanized Iron Sheet and supported on Aluminum frame. •The Material for the Construction of machinery -MS Sheets (powder coated) of gauge 3-4mm. •The outer size of the machinery (LxWxH) –10’ftx5’ftx12’ft 1. Capacity Regulator 2. Feed roller 3. Adjusting device for pre-aspiration 4. Main air control 5. Aspiration fan 6. Heavy air-separated waste 7. Material thickness control 8. Overflow from scalper screen 9. Light air – separated waste 10. Adjusting device or tail aspiration 11. Through from middle screen 12. Overflow from middle screen 13. Tail aspiration channel C) Fully Automatic Fan Gravity Separator with Standard Construction Technical Data : • Capacity– 4 ton per hour • No. of Fans– 7 no.s • Size of Deck– 1200 cms x 3000 cms • Type of Deck – Rectangular Type • Electric Drive – 10.00 HP • Motor – 3 ph.50 cycle Ac supply • VFD Vibro Motor – 2.00 HP •The Material for the Construction of machinery -MS Sheets (powder coated) of gauge 3-4mm. •The outer size of the machinery (LxWxH) –10’ftx6’ftx5.5’ft Machine Should have following Features: • All CNC Punching, Bending & Cutting. • Rectangular Deck for greater capacity and accuracy, quickly & easily interchangeable type. • Fans are dynamically balanced with individually adjustable air control for each fan for precise control of air flow. • All the fans are mounted on one common shaft. • Variable oscillation speed of deck in wide range. • Deck assembly is rested on four specially designed levers with bearings for smooth and trouble-free operation. • Variable inclination of deck side wise and length wise in wide range. • Seed collecting spouts are fitted with bag holding clamps. • Eccentrics are counter balanced giving smooth oscillation to the deck. • Miniature feeding hopper with variable feeding rate through controlled gate. • Built in air filters can be easily removed for easy access to the moving parts. •Provision for Dust Hood D) Magnetic Destoner Separator with Standard Construction Technical Data : •Capacity– 4 TPH •Nos. of roller –1 nos. magnetic roller and 1 nos. nonmagnetic roll •Diameter – Ø100 mm (4”) •Length– 1250 mm length roller (50 inch approx.) • Shaft of magnetic roller – total steel shaft •Magnet size –100 mm • Size of Machine –1400 mm x 1100 mm x 1100 mm • Feed Hopper Size : 1070 mm (L) X 600 mm (W) X 600 mm (H) input hopper • MOC –SS construction powder Coated 3 mm thickness. • Back roller –M.S. Behind with bearing • Divider – 100 mm x 1150 mm divider with excitable • Iron Tray Size – 1200 mm (l) x 300 mm (w) two nos. tray / Direct • Weight – 650 Kg approx. •Vibrator motor : 0.5 H.P. x 1 nos.1440 RPM Vibrator Motor •Spring –4 Nos. springs with Nylon Bush •Belt Size –1250 mm (w) x 1000 mm (D) •Motor phase –1. H.P. 3 phase 6 pole motor 1440 RPM Motor D) Magnetic Destoner Separator with Standard Construction Technical Data : •Capacity– 4 TPH •Nos. of roller –1 nos. magnetic roller and 1 nos. nonmagnetic roll •Diameter – Ø100 mm (4”) •Length– 1250 mm length roller (50 inch approx.) • Shaft of magnetic roller – total steel shaft •Magnet size –100 mm • Size of Machine –1400 mm x 1100 mm x 1100 mm • Feed Hopper Size : 1070 mm (L) X 600 mm (W) X 600 mm (H) input hopper • MOC –SS construction powder Coated 3 mm thickness. • Back roller –M.S. Behind with bearing • Divider – 100 mm x 1150 mm divider with excitable • Iron Tray Size – 1200 mm (l) x 300 mm (w) two nos. tray / Direct • Weight – 650 Kg approx. •Vibrator motor : 0.5 H.P. x 1 nos.1440 RPM Vibrator Motor •Spring –4 Nos. springs with Nylon Bush •Belt Size –1250 mm (w) x 1000 mm (D) •Motor phase –1. H.P. 3 phase 6 pole motor 1440 RPM Motor E) Fully Automatic Elevator with Standard Construction •MOC –MS construction powder Coated 2 mm thickness with CNC Cutting, Punching and Bending. •Belt - oil resistant •Buckets - 6” inch Nylon Food grade •Gearbox Motor Capacity -1.00 HP. F) Dump Hopper •MOC –MS construction powder Coated 2 mm thickness with CNC Cutting, Punching and Bending. •Size - 1524 mm x 1524 mm. •Height 915 mm. G) Raw Seed Elevator- •MOC –MS construction powder Coated 2 mm thickness with CNC Cutting, Punching and Bending. • Belt - oil resistant •Buckets - 6” inch Nylon Food grade •Gearbox Motor Capacity -1.00 HP. H) Vertical Bucket Elevator •MOC –MS construction powder Coated 2 mm thickness with CNC Cutting, Punching and Bending. • Belt - oil resistant •Buckets - 6” inch Nylon Food grade •Gearbox Motor Capacity -1.00 HP. I) Holding Bin for Pre-Cleaner •MOC –MS construction powder Coated 2 mm thickness with CNC Cutting, Punching and Bending. •Size - 610 mm x 458 mm and Height 458 mm. •Discharge Gate – Manually Operated • Seed level Viewing – Transparent and Unbreakable sheet • The top of the holding bin is to be covered with open-able cover of 2mm thick M.S. powder coted, with door for inspection and cleaning. J) Waste Product Chute for Pre-Cleaner All MS Steel Laser Cutting, CNC Bending and Punching and is used for removing all the waste products through Conveyor Shaft from the Seeds.K)Ducting for Pre-Cleaner All Cold Roll Steel Sheet CNC Bending & Cutting used to remove the Dust particles through the Blower installed on the machine towards outside. Size of the Ducting would be 305mmx305mm L) Mounting Stand with Extension Platform for Pre-Cleaner All MS Steel Construction, the size of the frame is 1220 mm x 1524 mm used to Mount the machinery fixed with Steel Nuts and Bolts. M) Holding Bin for Fine -Cleaner •MOC –MS construction powder Coated 2 mm thickness with CNC Cutting, Punching and Bending. •Size - 915 mm x 458 mm and Height 458 mm. •Discharge Gate – Manually Operated • Seed level Viewing – Transparent and Unbreakable sheet • The top of the holding bin is to be covered with open-able cover of 2mm thick M.S. powder coted, with door for inspection and cleaning. N) Waste Product Chute for Fine -Cleaner All MS Steel Laser Cutting, CNC Bending and Punching and is used for removing all the waste products through Conveyor Shaft from the Seeds. O) Ducting for Fine-Cleaner All Cold Roll Steel Sheet CNC Bending & Cutting used to remove the Dust particles through the Blower installed on the machine towards outside. Size of the Ducting would be 305mmx305mm P) Mounting Stand with Extension Platform for Fine-Cleaner All MS Steel Construction, the size of the frame is 1829 mm x 1524 mm used to Mount the machinery fixed with Steel Nuts and Bolts. Q) Holding Bin with MTG Stand for Gravity Separator •MOC –MS construction powder Coated 2 mm thickness with CNC Cutting, Punching and Bending. •Size - 2134 mm x 915 mm, and Height 1829 mm. •Discharge Gate – Manually Operated • Seed level Viewing – Transparent and Unbreakable sheet • The top of the holding bin is to be covered with open-able cover of 2mm thick M.S. powder coted, with door for inspection and cleaning. • Installed on the Square Heavy MS Channel fixed with Steps. • Channel height from ground level -4420 mm. R) Holding Bin for Magnetic Destoner •MOC –MS construction powder Coated 2 mm thickness with CNC Cutting, Punching and Bending. •Size - 1828 mm x 610 mm, and Height 1829 mm . •Discharge Gate – Manually Operated • Seed level Viewing – Transparent and Unbreakable sheet • The top of the holding bin is to be covered with open-able cover of 2mm thick M.S. powder coted, with door for inspection and cleaning. • Installed on the Square Heavy MS Channel fixed with Steps. • Channel height from ground level -3963 mm. S) Packing Bin with MTG Stand •MOC –MS construction powder Coated 2 mm thickness with CNC Cutting, Punching and Bending. •Size - 2438 mm x 915 mm, and Height 1829 mm. • Seed level Viewing – Transparent and Unbreakable sheet • The top of the holding bin is to be covered with open-able cover of 2mm thick M.S. powder coted, with door for inspection and cleaning. • Installed on the Square Heavy MS Channel fixed with Steps. • Channel height from ground level -4725 mm.. • Compatible with Automatic Bag Weighing and Filling Machine T) Automatic Bag Weighing and Filling Machine Ideal for All type of Grains •Capacity – 20-100 kg •Output– 3-4 bags per Min U) Sewing Machine Capacity - 250 - 300 bags/hour Type -Electric V) Ladder and Plat form for Elevators All Laser Cutting MS Steel Construction, fixed on the Elevators and ladder is used as steps to climb on the elevators and platform is fixed on the above of the elevator for installation of the gear box motor of the Elevators. W) Control Panel Box and Electrification for All Machinery MCCB TP+N 100A with OC,SC & RHOM R,Y,B Indicating Lamp 230V AC Led Type SP MCB 6A 10KA Multi data Meter VAF 3Phase EM6459 Current Transformer 100: 5 CI .1 5VA Emergency Push Button with 1NC Block Single Phase Preventer 3Phase AVLD2 Tower Light 2Tier Red & Green with Buzzer 230V Control Transformer 415/230V 500VA Mimic 500x500 6" Fan 230V Filter 6" CFL with DLS 2Change Over Relay with Base 230V AC Push Button Yellow 22.5Dia with 1NO Push Button Green 22 5Dia with 1NO MIMIC Lamp 230V AC Bi Colour Red& Green
2	160 kVA THREE PHASE DIESEL GENERATING SET TECHNICAL SPECIFICATION: A) DIESEL ENGINE:- Diesel Engine Model, Six Cylinders Inline, Liquid Cooled, Turbocharged with After Cooled, Developing 200 bhp @ 1500 RPM. Engine is with Electric Start, Compression Ignition, 4 Stroke Cycle, designed to run continuously at 1500 RPM. It confirms to IS 10002, ISO-3046, BS 5514 standards. All Diesel Engines are complied with latest CPCB norms. The Diesel Engines are comprising of followings: • Radiator with Fan • Fuel Injection equipment with Electronic Governor • Dry type Air Cleaner • Exhaust Silencer • Lube Oil filter (Spin On Type) • Fuel Oil filter (Spin On Type) • 12V Electric starting system • Battery charging alternator • Stop Solenoid • Lube Oil pressure Gauge • Water Temperature Gauge • Lube Oil temperature Gauge • Battery Voltage • K - Cool Super Plus coolant • First Fill Lube Oil • Status Indicator • Aesthetically Enhanced Genset • KRM (KOEL Remote monitoring) System in built in DG Set • QR Code Enabled Genset B) ALTERNATOR: - Alternator, suitable for continuous duty operations rated at 1500 RPM 415 V, 0.8 PF, 50Hz, 3Ph. In SPDP Enclosure, Self- Excited & Self- regulated, Brush less, ‘H’ class Insulation, Floor mounted with anti-frication Shielded Ball Bearing on end. The alternator conforms to IS: 4722, BS EN 60034-1 suitable for tropical conditions. C) BASE FRAME: - Suitable to couple above Engine & Alternator made from steel sheet metal. D) FUEL TANK: - 8 Hrs Capacity for continuous running, with Diesel fuel Inlet & Outlet, Air Vent & Drain plug arrangements. E) BATTERY: - 1 No.12 V Battery with Leads
3	COMPUTER PC SPECIFICATIONS:- Item Condition: New Processor: i5 Gen 12th RAM: 16GB RAM HDD/SSD: 1 TBHHD + 256SSD Operating System: Window 11Home Screen: 27 inch CPU :- INBUILT Warranty:1 Year Warranty
4	PRINTERWITHSCANNER SPECIFICATIONS :- Connectivity-USB, Ethernet & Wi-Fi Function Type- All-in-One Printer A4 SIZE Functions-Print, Scan, Copy
5	AIR CONDITIONER (SPLIT 5 STAR) SPECIFICATIONS :- 1.5 Ton 5 Star Inverter Indoor Split AC, AREA – 150 sq.ft.
6	WIFISETUP SPECIFICATIONS :- LOCAL 100 MBPS SPEED
7	CCTV Camera Setup with LED TV SPECIFICATIONS:- True Day / Night Resolution TVL-5 MP (Colour) Digital (DSP)-Yes Sensitivity lux-0.01 Electrical Specifications Voltage: 12 V DC Power Consumption: 5 W Focal Length mm -2.8 ~ 6 Picture Elements HxV -2052 x 1536 Back Light Compensation-Yes Auto Gain Control- Yes TV – 55”
8	ELECTRICITY 4000 SQ.FEET :- ELECTRIC PIPES & PVC CASTING CAPING PIPE WIRING 3PHASE & SINGLE PHASE BOARDS 15 SWITCHES & STOPPERS, Lights, Focus Lamps - OTHER ACCESSORIES ELECTRICAL
9	Portable Cabin Size-20*20 Build type- Aluminium with Glass PVC Ceiling
10	FURNITUREANDFIXTURE:- WOODENTABLESIZE – 1400 X 600 X 750 MM COMPUTERTABLE SIZE – 4 X 2 X 2.5 FEET (Wooden) REGISTRATIONTABLE SIZE – 60 INCH X 28 INCH (Wooden) Office CHAIRSSIZE – 76 X 112 X 76 (Movable & Height Adjustable) Guest Chair-Arm Rest With Armrest, Back Type Mid Back, Dimensions 420 mm*420 mm*815 mm · Load Capacity 125 Kg · Foldability Non Foldable, Equipped with a leatherette cushion-seat for enhanced comfort.