New Okhla Industrial Development Authority-NOIDA has published Tender For D/O Village ( Annual Electrical Maintenance Of Barat Ghar, Panchayat Ghar In Village- Sadarpur, Challera, Morna, Ghijore, Sarfabad And Parthala Khanjarpur), Noida. Submission Date for this Tender is 05-02-2024. Electrical Maintenance Tenders in noida Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Wiring point for light in 1.5 sq. mm. .FRLSHPVC insulated multistrand single core copper conductor cable (drawn through existing PVC conduit), with 1.5 sq. mm.FRLSHPVC insulated multistrand copper conducter cable as earth wireand 5 Amp.flush type switch & ceiling rose/angle/batten holder fixed with 3mm thick phenolic laminated backalite sheet with brass machine screws and cup washers mounted over existing M.S. switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer in charge. PS No. 174 (C) |
| 2 | Wiring point for fan/fresh air fan (light duty exhaust fan) with 1.5 sq. mm.FRLSHPVC insulated multistrand single core copper conductoer cable inexisting PVC conduit pipe with 1.5 sq. mm .FRLSHPVC insulated multistrand copper conducter cable as earth wire drawn in side the conduit. Completepiano type switch and ceiling rose / angle /betten holder 3mm thick phenolic laminated backelite sheet etc. Complete in all respects as directed including matching colour wash PS No. 177C |
| 3 | Wiring point for fan/fresh air fan (light duty exhaust fan) with 1.5 sq. mm.FRLSHPVC insulated multistrand single core copper conductoer cable inexisting PVC conduit pipe with 1.5 sq. mm .FRLSHPVC insulated multistrand copper conducter cable as earth wire drawn in side the conduit. Completepiano type switch and ceiling rose / angle /betten holder 3mm thick phenolic laminated backelite sheet etc. Complete in all respects as directed including matching colour wash PS No. 177C |
| 4 | S/F of power plugwith15A/240V Flush type switch and 5 pin 15A/250 Flush type universal socket in suitable MS box of 175mmx100mmx50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer as per PS No. 1139 |
| 5 | Supply and wiring of submains with 2 nos. 2.5 sq mm & with 1 no earth wire of 1.5 sq mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, including supply of all material, labour and T & P etc. required for proper completion of the work as directed by Engineer in charge.(as per PS No. 291C) |
| 6 | Supply and wiring of submains with 2 nos. 4 sq mm & with 1 no earth wire of 2.5 sq mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, including supply of all material, labour and T & P etc. required for proper completion of the work as directed by Engineer in charge.(as per PS No. 291A |
| 7 | Wiring point for fan/fresh air fan (light duty exhaust fan) with 1.5 sq. mm.FRLSHPVC insulated multistrand single core copper conductoer cable inexisting PVC conduit pipe with 1.5 sq. mm .FRLSHPVC insulated multistrand copper conducter cable as earth wire drawn in side the conduit. Completepiano type switch and ceiling rose / angle /betten holder 3mm thick phenolic laminated backelite sheet etc. Complete in all respects as directed including matching colour wash PS No. 177C |
| 8 | Supply and wiring of submains with 2 nos. 10 sq mm & with 1 no earth wire of 6.0 sq mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, including supply of all material, labour and T & P etc. required for proper completion of the work as directed by Engineer in charge.(as per PS No. 291G |
| 9 | S/F of SP MCB 6 Amp to 32 Amp C-curve type Havells make 10 KA complete in all respect PS No. 1002 (Cat-B) |
| 10 | S/F of 40 Amp DP MCBHavells make 10 KA complete in all respect PS No. 1010 (Cat-B) |
| 11 | S/F of 63 Amp FP IsolatorHavells makecomplete in all respect PS No. 1007 B(Cat-B) |
| 12 | S/F of 100 amp 415 Volt metal clad TPN HRC type switch fuse unit complete with HRC fuse on angle iron bracket complete in all respects PS No. 328 Cat B |
| 13 | S & F surface/Flush mounting 8ways TPN distribution board without additional Door without MCB complete in all respect, as directed at site byEngineer in charge.PS No. 1028 CAT-B |
| 14 | Supply and buring of safe earthing electrode T-19 (Hot dip galvanized), length up to 2000mm outer type 50mm, inner pipe, 25mm terminal dia 12mm, outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip galvanization up to 100 micron filled with crystalline conductive mixture(CCM) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good micture of retaining capicity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25x3 G.I. strip will be extra as per PS No. 725A |
| 15 | Supply and fixing of LED Tube Light with batten suitable for upto 1x22 watt LED Tube Light fitting including tube on surface. Complete in all respects (PS No. 1413 CAT-AAA) |
| 16 | Supply and Fixing Ceiling fan 1200 mm dai ISI Marked MAke-Bajaj, Crompton,Havells or Equalent Make,(AOR) |
| 17 | Supply and fixing and concealing of 25 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction ofEngineer in charge.(as per UPPWD 2018 item No. 149A) |
| 18 | Supply of Totally enclosed 300 mm dia exhaust fan, continously rated highly efficient heavy-dutymotor with ressure die cast aluminium rotor mounted on two ball bearings, Aerodynamically contoured blades handle maximum air with minimum power consumption. Rigid frame with rubber mountings for silent peratins. Expoxy powder coating with specially pretreated components for better resistance to corrosion. Degree of protection against dust & water entry is IP55 as per direction of E/I.(AOR) |
| 19 | S/F of sintex type junction box model no. IIGSJB 2817 of size 240x130x110mm with hinges and locking arrangment & MS clamp of 50x6mm flat, complete in all respects including 2 no. G.I pipe 1.5" dia having 1.0 meter length each and chuck nut for cable connection etc. as per direction of E/I. (AOR) |
| 20 | Supply , Installation , testing and commissioning of standard 4.0 Mtr. High (above ground) hot dip galvanized (grading of galvenisation average 70 micron or better as per IS 2629 or equivalent) pole, with stiffener, chain, allen bolt, foundation, single arm bracket, template, nut and bolts galvanized, factory finish base plate of size 200x200x12mm etc complete as required. The pole shall be made of 3mm thickness sheet with tolerance of +/- 5%. The column shall also be provided with flush door at the bottom with proper strengthening to the cutout of the door opening, a junction/loop box with heavy duty 3 phase , 32 Amp. connector with 16A DP MCB including all accessories complete as required derected by E/I.(Make - G.E./Philips/Bajaj/BPP) |
| 21 | S/Fixing of LED Street Light fitting having die cast Aluminium body and difuser with driver set suitable for 52 to 72 watt. Confirming to IP-66 and above protection. Complete in all respects. (PS No. 1422) Cat-AA |
| 22 | Supply and fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in chargeof work.Make Ankor,Kinjal(PS No. 1203 A) |
| 23 | Supplying and laying of aluminium conductor PVC insulated armoured, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. Clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respects. the armouring of the cable shall be properly connected with the earth conductor by clamps etc.(Polycab, Grandlay, Skytone, Havell"s make) |
| 24 | 1) 16 Sq.mm. x 2 Core |
| 25 | 2) 50 Sq.mm. 3.5Core(PS No. 501) |
| 26 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. as per PS No. 504 |
| 27 | 1- 16 Sq.mm. |
| 28 | 2- 50 Sq.mm. |
| 29 | Supplying and Laying of 6 sq. mm2 core PVC Insulated Al.moued cable for street Light pole(as per RESPO-2018) annexure -3 pg. 17. |
| 30 | Supply and fixing Pole bus bar support connector 4 way with backsheet i/c connection of cable complete in all respect. |
| 31 | S/Laying of90 mm dia (OD 76 mm & ID 51 mm nominal) size of (DWC) HDPE Pipes ISI marked along wigh all accessories like socket, bend, couplers etc. conforming to IS 14930, Part-II complete with filling and cutting, jointing etc. direct in ground ( 75 cm below ground level) including excavation and refilling the trench pat excluding sand cushioning and protective covering etc. Complete in all respects. Rex/Duraline/Time/CPE make. as per DSR 2018 item no. 14.16.2 page no. 49 |
| 32 | Supplying and erection of 11kV pin insulator complete with large steel head G.I. Pin, nuts & washer etc. as required (DSR-2018 item no. 13.10 pg.46) |
| 33 | Supplying and erection of 11kV Disc insulator for 11kV overhead line with galvanised inculator fitting, ball and socket type and complete with galvanised strain clamp, bolts, nuts& washer etc. as required (DSR-2018 item no. 13.11 pg.45) |
| 34 | S/F of 11 KV TPMO Relco/Rama/Azad make 9 Nos. insulator of Jai shree/BHEL/ Rama/ Rastriya make complete in all respects as per direction of E/I.(UPERC page no. 58) |
| 35 | Dismantling of pole/street Lightr standard / strut embedded in cement concrete foundation etc. as per required (DSR -2018/Item No. 12.42 P-46) |
| 36 | Hire charging of welding set running @ 6 hrs(AOR) |
| 37 | Hire charging of Gas Cutter setwith Oxyge & LPGrunning @ 6 hrs(AOR) |
| 38 | Filling available excavated earth( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming & watering, lead upto 50 m and lift upto 1.5 m. (AOR). P-01 |
| 39 | Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required (AOR) |
| 40 | a) Bituminous Portion (AOR) (2265.0+18% gst) |
| 41 | b) Water Bound Macadam (AOR) (1400.0+18% gst) |
| 42 | Earth work in Excavation in by mechanical means (Hydraulic excavator) manual means overareas excaading 30 mtr in depth,1.50 mtr width as well as 10sqm on plan)including out and desposal of excavated earth ,load upto 50m and lift upto 1.5 mas directed by the Engineer incharge (AOR). |
| 43 | Dismantling of ceiling fan and painting the same with with one or more coats of spraypainting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins refixing the same as required.DSR 2018 item no. 1.59 page no. 122 |
| 44 | S/F of out door type 11KV fuse set Relco/Rama/Rastriya make with insulator Jai shree/BHEL make complete in all respects as per direction of E/I..(AOR) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
